bucketep91 Posted March 18, 2011 Share Posted March 18, 2011 yeah some archwork then get her lower! itll sit perfect wehen the over fenders are on Quote Link to post Share on other sites
LukeSR Posted March 18, 2011 Share Posted March 18, 2011 Its not even complete but ohh my god!! Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 18, 2011 Author Share Posted March 18, 2011 luke its abit diffrent from when you saw it at the birmingham meet as for arch flaring i dont think il go down that route as it will permenently disform the car and i dout the sideskirts would fit once done aswell! as it sits now its pritty good no scrubbing ( apart from mahoosive potholes wich i dodge lol ) so alls good Quote Link to post Share on other sites
redz11 Posted March 18, 2011 Share Posted March 18, 2011 i wanna see with the overfenders on im still not sure about the wheels but maybe with the overfenders on i may change my opinion Quote Link to post Share on other sites
Sparky Posted March 18, 2011 Share Posted March 18, 2011 not sure how much the over fenders stick out but i would really recommend pulling or flaring the shit out your arches... then hiding them under your over fenders, will make driving it sooo much better and will eliminate scrubbing looking good though, bout time someone done something different!Exactly this!!!!! Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 18, 2011 Author Share Posted March 18, 2011 skirts now fitted! no pics because its coverd in tape holding them in position! the one skirt is slightly bent and needed some serious work to get it to fit! been a real pain tbh but it will be worth it once ther all on properly!the overfenders cover the wheels nicely so no need for any arch work will keep you updated! Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 21, 2011 Author Share Posted March 21, 2011 one of my canards came off last night on the motorway so had the pull the other one off aswell! ( wich wasnt easy! ) no damage to the bumper because it was only stickerflex wich will come off easy enough lolskirts all fitted up been a rite pain with the fitting! at one point i couldent open my door because the sill of the skirt was catching the door! bit of double sided sticky tape and some more stickerflex sorted it loltheres a couple of gaps on the skirts but as soon as the overfenders are on it will look better Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 21, 2011 Author Share Posted March 21, 2011 test fitted the overfenders today and im not sure what to do.. the front ones seem to be too long? i think i will need some sort of edging strip like they use on the mini wide arches or the l200 pick ups , im not too sure what its called or where to get!anyone have any ideas?heres some pics neways...comments pleaseeee Quote Link to post Share on other sites
ryan lang Posted March 21, 2011 Share Posted March 21, 2011 looks wicked, but back seats need to come out and lower it some more Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 21, 2011 Author Share Posted March 21, 2011 cant lower it anymore dude its just at the point if i go any lower it will scrape cornering lol Quote Link to post Share on other sites
redz11 Posted March 21, 2011 Share Posted March 21, 2011 looks wicked, but back seats need to come out and lower it some more x2does make the wheels look less 'chunkier' to my eyes, brave move on the wheels definatly unique will probs look better in the flesh.. that first picture though is the sex! if you had idrees alloys hes got on his now i think this would be simply stunning! Quote Link to post Share on other sites
Nanglebadger Posted March 21, 2011 Share Posted March 21, 2011 mint! looks beefy as fook!!!!! love it!but yeah, some arch gap there at the front...not that i can say much, look at mine when i have the 14s on lol!lookin goooooooooooooooooooood man!Phil. Quote Link to post Share on other sites
ollie ryan Posted March 21, 2011 Share Posted March 21, 2011 need a more sensible offset the wheels look like they still stick out from the arches a hell of alotlooks awesome tho just not keen on the wheels Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 21, 2011 Author Share Posted March 21, 2011 ill get some propper pics up once they are fitted,just got to figure out what im going to do with the over hang on the front onesand where to get this seal thing from! Quote Link to post Share on other sites
iamlegend Posted March 21, 2011 Share Posted March 21, 2011 this is looking really nice mate ;) its just shame the iddy workz products do not fit very well at all........ Quote Link to post Share on other sites
Nanglebadger Posted March 21, 2011 Share Posted March 21, 2011 ...sits and awaits what will be an absolute onslaught of criticism about the above post. good luck defending that one on here dude, i'm off to make a cuppa tea and then sit and watch this one hit the fan...Phil. Quote Link to post Share on other sites
iamlegend Posted March 21, 2011 Share Posted March 21, 2011 ...sits and awaits what will be an absolute onslaught of criticism about the above post. good luck defending that one on here dude, i'm off to make a cuppa tea and then sit and watch this one hit the fan...Phil.eh? am i not allowed to say anything negative like only saying what i think i am not greifing or dissing him just saying as it doesnt fit 100% so do not see what the problem is tbh. so yea make a cup of tea and sit this one, make me one please 2 sugars also is there a gang or somthing that will beat me up since i said it doesnt fit very well " good luck defending that one on here dude" ;) Quote Link to post Share on other sites
Nanglebadger Posted March 21, 2011 Share Posted March 21, 2011 calm down! im simply saying there may be some defence of iddy.we're all entitled to an opinion.lets not get grumpy with one another.Phil. Quote Link to post Share on other sites
iamlegend Posted March 21, 2011 Share Posted March 21, 2011 i was just stating the parts hes fitted thats all i am not saying all of his stuff man phil stop making the situation more than it is...no actualy far from upset am laffing, i was only saying.. jeeees yea idrees has good feedback and has sold me many stuff so not slating him on that, also just becouse he has sold perfect moulds of replica body parts doesnt mean everything will be perfect anyhoo sorry to spam your thread josh. peacesee you edited your post phil ;) Quote Link to post Share on other sites
Nanglebadger Posted March 21, 2011 Share Posted March 21, 2011 just ignore me i'm being tired and cranky, edited my post.back to the point, josh, it looks ubes! keep it up!Phil. Quote Link to post Share on other sites
drongo boi Posted March 21, 2011 Share Posted March 21, 2011 looks awesome pal ;) just needs lowering some more Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 21, 2011 Author Share Posted March 21, 2011 tbh the products are spot on! spoiler= perfect, bumper= perfect , iddy said the skirts needed abit of sanding so i did ;) i just didnt do a very good job lolas for the overfenders im sure il sort it on a better note ! I've orders some edging strip for the overfenders should all be on the car in a week or so~! Quote Link to post Share on other sites
Sparky Posted March 21, 2011 Share Posted March 21, 2011 How can you say that iamlegend, obviously the overfenders were not designed to be used with the Varis bumper!My ZEP fenders were an awful fitment, but Iddy sorted that out with the mould he took from them. Quote Link to post Share on other sites
Glanza_cl Posted March 22, 2011 Share Posted March 22, 2011 i would just sand it down to size if it causes to many problems... that's a big gap and wont match unless you take some off by the look of things.also you have gone to all this effort with the kit and the low offset wheels i just think its kinda a waste to not roll the arches and lower it more... you almost have a ridiculously nice car on your hands but to pull something like this off you have to take it the full nine yards. if done right this car will be become a unique and trend setting car, something people look back on and look to match in style but you reeeealy have to push it just that bit further. no glory without pain *stands up with flag waving background as heroic tunes play over me*unnecessary rant... over lol Quote Link to post Share on other sites
Josh@TunerLifestyle Posted March 22, 2011 Author Share Posted March 22, 2011 ^^^^ very necessary rant mate! i do know what you mean! i have been thinking about this and had ideas like smoothing in the overfenders and cutting the insides out but doing this over time it will crack because of bodyflex and all that, or having them flared out properly! its all things i am thinking about im just abit iffy because it will be permenent!the other thing is im not made of money so i cant really go for a big spend do what ever i like sort of thing, i have to save and think about what im spending on lolbut dude i understand what your getting at and will look into this ;) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.