muin1331 Posted August 12, 2014 Share Posted August 12, 2014 want to ask, im running a 5efte with a gt3076, any ideas on how thick my exhaust piping should be? Quote Link to post Share on other sites
turbo Grant Posted August 12, 2014 Author Share Posted August 12, 2014 want to ask, im running a 5efte with a gt3076, any ideas on how thick my exhaust piping should be?3" as a minimum. Quote Link to post Share on other sites
muin1331 Posted August 13, 2014 Share Posted August 13, 2014 thanks turbo grant Quote Link to post Share on other sites
Azz Posted August 13, 2014 Share Posted August 13, 2014 thanks turbo grant As above, I run a gtx3071r with a 3" turbo back exhaust no boxes ect... And it's perfect Quote Link to post Share on other sites
turbo Grant Posted September 17, 2014 Author Share Posted September 17, 2014 So dragged this old thing out last weekends. Was looking rather grubby so sloshed it off. Have done absolutely nothing except take a few bits off this year. I will crack on with the stripping soon. Lots of bits to go on and change. Might even space frame the front end yet. Quick dirty pic rolling on 14's Quote Link to post Share on other sites
aaddzz123 Posted September 18, 2014 Share Posted September 18, 2014 I keep seeing your photos on snap chat (along with the ones of dead animals n stuff). Best GT on here in my opinion. Can't wait to see it done. Quote Link to post Share on other sites
muin1331 Posted October 30, 2014 Share Posted October 30, 2014 Turbo grant, how did u manage to do your timing? Seems like mine is a little off....I'm not runnin a adjustable cam, but ordering one soon Quote Link to post Share on other sites
turbo Grant Posted October 30, 2014 Author Share Posted October 30, 2014 I timed it up using the 4e mark on the cam pully. Need to pull the head off for its new one soon and I will be using a dial gauge for the timing on that one Quote Link to post Share on other sites
muin1331 Posted October 30, 2014 Share Posted October 30, 2014 Okok turbo grant, one other thing, have you got any pictures of your injector wires, changed my clips and the plastic holder and I'm not sure which sequence the go back in :s Quote Link to post Share on other sites
turbo Grant Posted October 30, 2014 Author Share Posted October 30, 2014 I've gone sequential injection on this. But on a batch fire system it will be 1-4 on bank 1 and 2-3 on bank 2 Quote Link to post Share on other sites
muin1331 Posted October 30, 2014 Share Posted October 30, 2014 Okok, the only problem I have now it maintaining idle, when I drove the 5e with stock turbo and manifold it would throttle perfectly but be more light than a corsa haha...not it's running a piggyback system from Thailand, ran that with the stock setup before I did the rebuild and upgrade. Now I just need to iron out the issues to make her run again Quote Link to post Share on other sites
muin1331 Posted November 22, 2014 Share Posted November 22, 2014 my car is running now, but it just doesn't feel fast at all....specs are, 5efte...74.5mm forged pistons, with rods also, head is standard. turbo is a gt3076 with 3inch piping; custom manifold (intake and exhaust) 560cc injectors, a evo6 throttlebody, piggy back system, tomei regulator, 255lp dw fuel pump....any help would be awesome!! Quote Link to post Share on other sites
muin1331 Posted December 2, 2014 Share Posted December 2, 2014 I put it at the 5e timing, should I switch it back to 4e? I think that is the problem... My friend thinks that since it's a 5e block the timing should be there, but I think I should put it back to 4e I put it at the 5e timing, should I switch it back to 4e? I think that is the problem... My friend thinks that since it's a 5e block the timing should be there, but I think I should put it back to 4e Quote Link to post Share on other sites
turbo Grant Posted December 2, 2014 Author Share Posted December 2, 2014 Time it up with the 4e marks. Only about half a tooth between the 2 marks. But you need to time the engine to tdc. The remove the cam pully and refit on 4e marks. Quote Link to post Share on other sites
GlanzaJim Posted December 2, 2014 Share Posted December 2, 2014 Im sure i see this back in 2011 up lakeside had a screamer out bonnet Quote Link to post Share on other sites
muin1331 Posted December 3, 2014 Share Posted December 3, 2014 Thank you very much turbo grant! You have helped me a lot with my build Quote Link to post Share on other sites
jimmymac101 Posted December 3, 2014 Share Posted December 3, 2014 (edited) Mate this is a sad looking picture you need to get this on the road !! It looks like an absolute animal !! James Edited December 3, 2014 by jimmymac101 Quote Link to post Share on other sites
muin1331 Posted December 3, 2014 Share Posted December 3, 2014 hello turbo grant, my friend wants to know which point I set the timing at, as there are 3 marks on the head...would it be any trouble from you to send a pic of your timing point up where your cam is? much appreciated...Michael Quote Link to post Share on other sites
turbo Grant Posted February 13, 2015 Author Share Posted February 13, 2015 So I've started doing some work on this again. Painted rocker cover and finished wiring up the coils that I started over a year ago haha Quote Link to post Share on other sites
5e colin Posted February 13, 2015 Share Posted February 13, 2015 you sir are a fast worker ha ha . poor car !!! when do you think to have her back up and running ?? Quote Link to post Share on other sites
turbo Grant Posted February 13, 2015 Author Share Posted February 13, 2015 Be nice to have it running and painted for March Quote Link to post Share on other sites
akyakapotter Posted February 13, 2015 Share Posted February 13, 2015 Be nice to have it running and painted for MarchAnd attending japfest with it Quote Link to post Share on other sites
lew777 Posted February 13, 2015 Share Posted February 13, 2015 And attending japfest with it I hope so too , be nice to see it finished. Quote Link to post Share on other sites
ro55ifumi Posted February 20, 2015 Share Posted February 20, 2015 Be nice to have it running and painted for MarchWould be really good to see it John Quote Link to post Share on other sites
Dingo Del Posted April 2, 2015 Share Posted April 2, 2015 Hey ... While looking for something else I come across this !!! What a I am, as 1 1/4 hrs later at 2.43 am and way past my bed time, I finally reach the anti climax .... is not finished Ahh well, no sweet dreams for me tonight loll Next time .... Top efforts my man Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.