Keri-WMS Posted November 6, 2013 Share Posted November 6, 2013 It's about time we got prices for entry level brakes up here. In particular we are pleased to launch the WMS 110% discs, these are thicker castings for increased stiffness (= reduced warping) and increased thermal mass (= lower temperatures). They are ideal for trackday and high power cars when you can't stretch to a WMS 4-pot kit! NOTE: Being a performance / closer tolerance part you need to make very minor tweeks: Fit the caliper shims we supply (only just over 1mm) and thoroughly de-rust and maybe blueprint your caliper carriers inc under the clips, making sure nothing other than pads touches the new discs. >> OEM Starlet (254mm type) caliper << - WMS 110% 254mm-fit discs for 55mm hub, inc caliper centering shims = £65.00+vat/pr- The same but grooved = £95.00+vat/pr- Ferodo DS2500 pads to suit = £102.30+vat/pr *- Ferodo DS3000 pads to suit = £111.90+vat/pr * (* we will try to match any online retail Ferodo price if bought at the same time as 110% discs. Emailed quote proof of price and Ferodo dealer status from competitor required!!!) SHIPPING (for OEM size discs+pads) = £10.00+vat UK mainland, £16.00 for Highlands and (check!!) Islands, £16.00+vat to Northern Ireland, £20.00+vat to the Republic of Ireland, . NOTE: We are open to group-buys on the 110% discs (pads have the price match offer if bought with 110% discs)!!! >> ST185 single-pot (277mm type) caliper << - Ferodo DS2500 pads to suit = £86.66+vat/set, TBC as a bit out of date- 277x25 discs to fit ST185 single pot caliper on 55mm starlet hub = £TBC, under development- 277x25 discs to fit ST185 single pot caliper on 54mm starlet hub = £TBC, under development >> ST185 twin-pot (255?mm type) caliper << - TBC, under development >> Levin twin-pot (?mm type) caliper << - TBC, under development Quote Link to post Share on other sites
T-dog Posted November 6, 2013 Share Posted November 6, 2013 I'll have a set of st185 single pot grooved discs Quote Link to post Share on other sites
russ78 Posted November 7, 2013 Share Posted November 7, 2013 As above prices for twin pots st185 Quote Link to post Share on other sites
karl. Posted November 7, 2013 Share Posted November 7, 2013 I would be up for a group buy on the OEM groved 110%'s and a set of Ferodo DS2500 pads. Quote Link to post Share on other sites
Jamie5414 Posted November 7, 2013 Share Posted November 7, 2013 +1 Ep91 Quote Link to post Share on other sites
Ollieh17 Posted November 7, 2013 Share Posted November 7, 2013 +2 ep91 Quote Link to post Share on other sites
micky boy Posted November 7, 2013 Share Posted November 7, 2013 Price for st185 single pot grooved discs/pads Quote Link to post Share on other sites
mech5107 Posted November 7, 2013 Share Posted November 7, 2013 So, are we talking for thicker discs, but for the stock calipers? ie 20mm discs? Quote Link to post Share on other sites
DaddyDutch Posted November 7, 2013 Share Posted November 7, 2013 OEM & ds2500's Quote Link to post Share on other sites
Jamie5414 Posted November 7, 2013 Share Posted November 7, 2013 Group buy for these? I would be down if we can get some discount - WMS 110% 254mm-fit discs, inc caliper centering shims = £65.00+vat/pr- The same but grooved = £95.00+vat/pr- Ferodo DS2500 pads to suit = £95.91+vat/pr * Quote Link to post Share on other sites
Keri-WMS Posted November 8, 2013 Author Share Posted November 8, 2013 Right, regarding all Celica and Levin calipers, I can't release any discs without getting hold of the calipers first to be 101% sure it's as good as I can make it, am happy to cover 2-way postage and give any willing lenders a discount though..... I'll start the 254mm 55mm bore WMS-110% group buy off, not sure how long to run it for though! I'm thinking 7.5% for 3+ buyers, 10% for 6+ buyers and 12.5% for 12+ buyers to get the ball rolling, UK zone 1 postage is £10.00+vat. Add DS2500 pads if you want them ( P ), and grooves ( G ) if you want them, don't mind that being a mix and match. So, 110% discs:1. karl. (G=Y, P=Y)2. Jamie5414 (G=Y, P=Y)3. Ollieh17 (G=?, P=?)4. DaddyDutch (G=Y, P=?)5.6.7.8.9. Mech that's pretty much it, they are slightly thicker to increase performance but still fit the OEM calipers. Quote Link to post Share on other sites
Jamie5414 Posted November 8, 2013 Share Posted November 8, 2013 Are the prices for pads still the same as in the OP Keri? Cheers Quote Link to post Share on other sites
DaddyDutch Posted November 8, 2013 Share Posted November 8, 2013 (edited) Right, regarding all Celica and Levin calipers, I can't release any discs without getting hold of the calipers first to be 101% sure it's as good as I can make it, am happy to cover 2-way postage and give any willing lenders a discount though..... I'll start the 254mm 55mm bore WMS-110% group buy off, not sure how long to run it for though! I'm thinking 7.5% for 3+ buyers, 10% for 6+ buyers and 12.5% for 12+ buyers to get the ball rolling, UK zone 1 postage is £10.00+vat. Add DS2500 pads if you want them ( P ), and grooves ( G ) if you want them, don't mind that being a mix and match. So, 110% discs:1. karl. (G=Y, P=Y)2. Jamie5414 (G=Y, P=Y)3. Ollieh17 (G=?, P=?)4. DaddyDutch (G=Y, P=N)5.6.7.8.9. Mech that's pretty much it, they are slightly thicker to increase performance but still fit the OEM calipers.Edited Keri.Postage to Ireland??Al. Edited November 8, 2013 by DaddyDutch Quote Link to post Share on other sites
Keri-WMS Posted November 8, 2013 Author Share Posted November 8, 2013 Are the prices for pads still the same as in the OP Keri? Cheers Yup, I checked and they are current. Ferodo are putting prices up in Jan by about 4% though as far as I know... Edited Keri.Postage to Ireland??Al. £20.00+vat to the Republic of Ireland, £16.00+vat to Northern Ireland. I'll add this to the first post. :-) Quote Link to post Share on other sites
Jamie5414 Posted November 14, 2013 Share Posted November 14, 2013 Any more for the group buy? I'll be purchasing mine at the end of the month. More people = Less cost When are others on the buy looking to purchase? Cheers Quote Link to post Share on other sites
Keri-WMS Posted November 18, 2013 Author Share Posted November 18, 2013 I'll email a few people that have asked about these in the past to see if we can get more takers... Quote Link to post Share on other sites
micky boy Posted November 18, 2013 Share Posted November 18, 2013 Shit forgot about this Do you still need the st185 single pot caliper/carrier? I have the caliper and carrier but dont have the carrier bolts cant seem to find them Quote Link to post Share on other sites
karl. Posted November 21, 2013 Share Posted November 21, 2013 Bump Up, Anybody else? Needing brakes soon Quote Link to post Share on other sites
glanzav99 Posted November 21, 2013 Share Posted November 21, 2013 (edited) Right, regarding all Celica and Levin calipers, I can't release any discs without getting hold of the calipers first to be 101% sure it's as good as I can make it, am happy to cover 2-way postage and give any willing lenders a discount though..... I'll start the 254mm 55mm bore WMS-110% group buy off, not sure how long to run it for though! I'm thinking 7.5% for 3+ buyers, 10% for 6+ buyers and 12.5% for 12+ buyers to get the ball rolling, UK zone 1 postage is £10.00+vat. Add DS2500 pads if you want them ( P ), and grooves ( G ) if you want them, don't mind that being a mix and match. So, 110% discs:1. karl. (G=Y, P=Y)2. Jamie5414 (G=Y, P=Y)3. Ollieh17 (G=?, P=?)4. DaddyDutch (G=Y, P=?)5.glanzav99 (G=Y, P=Y)6.7.8.9. Mech that's pretty much it, they are slightly thicker to increase performance but still fit the OEM calipers. Do you also post to the netherlands ? Edited November 25, 2013 by glanzav99 Quote Link to post Share on other sites
Ollieh17 Posted November 21, 2013 Share Posted November 21, 2013 so how much would disks and 2500 pads be all round? Are they abs compatable? Quote Link to post Share on other sites
Keri-WMS Posted November 22, 2013 Author Share Posted November 22, 2013 Shit forgot about this Do you still need the st185 single pot caliper/carrier? I have the caliper and carrier but dont have the carrier bolts cant seem to find them I'll need to borrow one at some point soon - I can probably cope without the bolts at a push, annoying for you though! Bump Up, Anybody else? Needing brakes soon If we can't get any more I'll still go ahead soon... Do you also post to the netherlands ? Yes, no problem! It would be about £28+vat so how much would disks and 2500 pads be all round? Are they abs compatable? We can't get DS2500 for the rear I don't think, and we also don't currently have a source of rear discs - I'll have to look into that! Quote Link to post Share on other sites
micky boy Posted November 22, 2013 Share Posted November 22, 2013 I might be able to dig the bolts out they'll be some where kicking about! Give me a shout when you are in need Keri and we'll got for there mate if you dont mind paying the postage i dont mind sending the caliper Quote Link to post Share on other sites
RM15_Glanza Posted November 22, 2013 Share Posted November 22, 2013 Ive dropped you a PM regarding st165/185 twin pots not goin to be using mine for a while so i can drop them by if you still need them Quote Link to post Share on other sites
ro55ifumi Posted November 22, 2013 Share Posted November 22, 2013 Would love a set for the levin set up Quote Link to post Share on other sites
Keri-WMS Posted November 26, 2013 Author Share Posted November 26, 2013 I'm going to close the 110% group buy at the end of the month if that's ok with everyone, at that point I'll start collecting funds and processing the orders. That leaves a bit of time for people I've messaged to join in if they want. The Celica / Levin discs project is next (that and restocking the 4 pot kit brackets!) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.