Scoobysvx Posted December 16, 2015 Author Share Posted December 16, 2015 You can have it back but it will be slightly more expensive 😂 You've got a cool project on the go anyway! Quote Link to post Share on other sites
Pikey009 Posted December 16, 2015 Share Posted December 16, 2015 Yeh but I should've kept it and boosted it while turning it into an sr rep. 4wd turbo sr is a good sleeper lol. Love what you're doing though- and you wouldn't sell it Quote Link to post Share on other sites
daniel_g Posted December 16, 2015 Share Posted December 16, 2015 Youre putting the rest of us 4paw owners to shame with this build haha, keep it up Quote Link to post Share on other sites
Scoobysvx Posted December 16, 2015 Author Share Posted December 16, 2015 (edited) A 4wd turbo sr would be the ultimate sleeper you've got that right! Not my style though unfortunately 😔 Cheers though jase, yeh each to their own! No way 😝Cheers Daniel! I haven't got any commitments atm so I'm doing it while I can 😁 Edited December 16, 2015 by Scoobysvx Quote Link to post Share on other sites
Pikey009 Posted December 17, 2015 Share Posted December 17, 2015 Yeh that's the way to do it! Mate I'm still loving the car even though it's different to what I had planned it's nice to see it turning into a weapon Quote Link to post Share on other sites
Scoobysvx Posted December 17, 2015 Author Share Posted December 17, 2015 Finally some more progress! Slow and steady wins the race 😂Purchased some spark plugs & got those fitted, they always seemed to get left out when I was ordering parts!At long last I got my rocker cover on 😆 Really pleased with it but everything needs polishing again now! Got the leads on too but need to tidy them up a bit tomorrow Offered up the intercooler pipe work again with the black joiners and got the dump valve fitted tooNext I got the FPR mounted where I wanted it, I'll be running the braided hoses from it tomorrow so the fuel system will be ticked off the long list!More importantly the carbon bonnet is on!!! Mega pleased with it. The pas pump should be mounted tomorrow so I can get the wings and bonnet fitted too! Still in need of a o/s headlamp to finish off the front end if anyone's got one?? And a quick snap showing the state of the interior 😂More to come tomorrow 😊 Quote Link to post Share on other sites
Ollieh17 Posted December 17, 2015 Share Posted December 17, 2015 Seems a shame to run pas in that bay Quote Link to post Share on other sites
Scoobysvx Posted December 17, 2015 Author Share Posted December 17, 2015 I've got an electric pump which is going to be mounted in front of the wheel so none of it should be seen hopefully! Quote Link to post Share on other sites
Gainzy Posted December 17, 2015 Share Posted December 17, 2015 This is amazing I hope it get's a cage lovely colour Quote Link to post Share on other sites
Ollieh17 Posted December 17, 2015 Share Posted December 17, 2015 Fair play, thats what i was gonna do. Turns into an obsession when you start making the bay minimilaist Quote Link to post Share on other sites
Pikey009 Posted December 17, 2015 Share Posted December 17, 2015 Wow you'll need to employ someone to polish that engine bay every day of the week! Quote Link to post Share on other sites
Scoobysvx Posted December 17, 2015 Author Share Posted December 17, 2015 This is amazing I hope it get's a cage lovely colour Yeh I do want/need to but I'd like to keep the back seats ideally so it'd have to be a custom job! That's something I'll look into next year when it's up and running 👍Fair play, thats what i was gonna do. Turns into an obsession when you start making the bay minimilaist Your right there buddy! The only thing I'd change would be to get rid of the fuse box and make my own loom but it doesn't bother me that much atm so it's stayingWow you'll need to employ someone to polish that engine bay every day of the week!I know! Plenty of people at work to do that 😉 Quote Link to post Share on other sites
Scoobysvx Posted December 18, 2015 Author Share Posted December 18, 2015 (edited) I made up the hoses for the FRP today and P clipped it against the bulkhead. In need of a right angle an fitting for the fuel filter though Also got the catch can in place, I'll tidy up the bracket when it's all where I want Edited January 1, 2016 by Scoobysvx Quote Link to post Share on other sites
Pikey009 Posted December 18, 2015 Share Posted December 18, 2015 Amazing work mate Quote Link to post Share on other sites
Ep82gi Posted December 19, 2015 Share Posted December 19, 2015 This is beautiful mate great work Quote Link to post Share on other sites
Japscrapno1 Posted December 19, 2015 Share Posted December 19, 2015 Love this build!!! Quote Link to post Share on other sites
adzy Posted December 20, 2015 Share Posted December 20, 2015 This looks awesome!! Really need to get my bay tidied up some Where did you get your an fittings? I'm looking some other than the red ones Quote Link to post Share on other sites
Scoobysvx Posted December 20, 2015 Author Share Posted December 20, 2015 (edited) Amazing work mateThis is beautiful mate great work Love this build!!! Thanks guys!This looks awesome!! Really need to get my bay tidied up some Where did you get your an fittings? I'm looking some other than the red onesCheers buddy, I purchased them off eBay but I think the colours are pretty limited tbh! I know you can get all black, red/blue and my colour but that's about it I think! Edited December 20, 2015 by Scoobysvx Quote Link to post Share on other sites
Scoobysvx Posted December 23, 2015 Author Share Posted December 23, 2015 A small Christmas present to myself... 😝New Link G4 ECU to replace my apexi powerfc. After speaking to rob about it he seemed much happier about me using that and also has a friend who is able to map it which is a bonus! Going to make a loom for it and find a auto tps to run with it Quote Link to post Share on other sites
Scoobysvx Posted December 30, 2015 Author Share Posted December 30, 2015 2 months later and I managed to pick up my parts from Toyota...The inner cv boots had split and I tried various universal boots and tried using the outer ones but none would fit properly so I purchased 4 new boots and both gearbox and transfer box output seals just to be safe Quote Link to post Share on other sites
akyakapotter Posted December 30, 2015 Share Posted December 30, 2015 I bet they were pricey I tried to get one for my glanza inner cv boot wanted stupid money. Quote Link to post Share on other sites
Scoobysvx Posted December 30, 2015 Author Share Posted December 30, 2015 You've got that right! £280 for that lot there 😢 I could have used pattern ones for the outer but I thought I might as well put ones on there that are going to last! I don't want them popping off and making a mess of my shinny new bay 😝 Quote Link to post Share on other sites
Pikey009 Posted December 30, 2015 Share Posted December 30, 2015 Shit that's expensive! Quote Link to post Share on other sites
Scoobysvx Posted December 30, 2015 Author Share Posted December 30, 2015 Jase managed to dig out some pictures from when Enzo & his girlfriend owned it...The body work was looking pretty mint then! Hopefully it will still polish up alright Quote Link to post Share on other sites
adzy Posted December 30, 2015 Share Posted December 30, 2015 Haha I priced a cv boot in toyota not long ago, got a right scare! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.