nest Posted December 3, 2014 Share Posted December 3, 2014 (edited) Unfortunately due to me moving to Australia I’m going to have to break my time attack starlet project, everything is for sale, a lot of the parts are brand new unused, and if there not new they will off been refurbished by me. You can contact me on here via PM.Mobile number 24/7: 07787606365Email: jakenest1@hotmail.co.uk I have more parts that I will update in the next few weeks, would advise coming to collect can post at buyers expense, if collecting bring extra cash as there will more than likely be bits you’ll want that I have not put on here. 1992 starlet GT shell, this shell has had extensive work done to it, it has a full custom weld-in roll cage fitted, all to FIA standard, picture’s don’t do it justice, the whole shell has been seam welded and all engine mount points have been reinforced and strengthened. The rear wheel well has been cut out and I have a carbon fibre sheet to go over the hole which will come with the shell, there is a welded in steel tube frame for the fuel cell in the rear which I will leave in if the buyer wants it with the fuel cell or can be removed, the is a rear tube frame built to hold a rear-mount oil cooler setup. Will come with all legal documents, It is a bare shell; however it will come with the following: All glass apart from front windscreenFull loomAll door locks, hinges, rubbers etcCan get it rolling for ease of transport I’m looking for: £900 without the fuel cell£1150 with fuel cell More pictures on request: Custom Zisco Cruise style manifold, Ceramic coated by zircotec in performance white, Custom built Garret turbo to produce between 250-300bhp on a well-built engine with minimal lag, talking ct9 territory, externally gated by a turbo smart wastegate, Stainless steel screamer pipe and downpipe, K&N filer, full braided oil and water lines. Kit is completely brand new, is an absolute bargain for someone £1750 for the lot no offers Custom buddy club spec 2 style stainless exhaust system built by Zisco £350 Enkei alloy wheels, Super lightweight 15x7 been painted white, decent condition £250 Outlaw 2000 front brake kit, Monster brakes super rare £600 Zisco baffled ally fuel cell £250 Dastek piggy back with boost module £150 Zisco front mount intercooler set-up short route pipework (no picture of core as its at my workshop, will get picture next couple days) £225 Full powerflex poly bush kit with anti-lift kit £200 Edited December 31, 2014 by nest Link to post Share on other sites
Glanza-Ben Posted December 3, 2014 Share Posted December 3, 2014 That is some serious breaker thread Link to post Share on other sites
bradp94 Posted December 3, 2014 Share Posted December 3, 2014 Whoever buys the exhaust has to post a video of the sound of it, was dying to hear it! Link to post Share on other sites
Whitenoize Posted December 3, 2014 Share Posted December 3, 2014 I'd love that exhaust it's just the wrong side of Xmas unfortunately Link to post Share on other sites
amatthews45 Posted December 3, 2014 Share Posted December 3, 2014 Where abouts are you? Interested in the dash and panrod. Link to post Share on other sites
Ollieh17 Posted December 3, 2014 Share Posted December 3, 2014 pm'd Link to post Share on other sites
shorty Posted December 3, 2014 Share Posted December 3, 2014 (edited) She Would of been savage jake Just gotta say guys jake put a seriouse amount of thought into the spec of this build and used to work at an aston martin tuning company so knows his stuff.Shame you ran out of time to build it before the big move bud Edited December 3, 2014 by shorty Link to post Share on other sites
yaristurbo Posted December 3, 2014 Share Posted December 3, 2014 Top seller buy with confidence Link to post Share on other sites
scottieboi94 Posted December 3, 2014 Share Posted December 3, 2014 This is THE best breakers thread i have ever seen, these parts are epic!GLWS! Link to post Share on other sites
Liam_D Posted December 3, 2014 Share Posted December 3, 2014 That turbo kit though <3!! IF it was for td04 I would pay good money for that manifold Link to post Share on other sites
fiddlersport Posted December 3, 2014 Share Posted December 3, 2014 pmd-polybush kit Link to post Share on other sites
nest Posted December 3, 2014 Author Share Posted December 3, 2014 Where abouts are you?Interested in the dash and panrod.Panhard prov sold, if the buyer lets me down you have first dibs, dash still for sale bud. All PMs replied to Coilovers are now soldInlet manifold prov sold Thanks for all the kind word guys, appreciate it Link to post Share on other sites
nest Posted December 3, 2014 Author Share Posted December 3, 2014 Panhard rod now sold Link to post Share on other sites
FraserEP91 Posted December 4, 2014 Share Posted December 4, 2014 I'll have coilovers pm me Mate Woops didn't read propperly there sold Link to post Share on other sites
nest Posted December 4, 2014 Author Share Posted December 4, 2014 I'll have coilovers pm me MateWoops didn't read propperly there sold Yeah mate sold very quickly, loads off interest in them. ShellWheelsDashBrakesall prov sold Link to post Share on other sites
HOK Posted December 4, 2014 Share Posted December 4, 2014 Interested in zisco front mount and ignition leads, I'll pm you later as at work bud, or you could pm me.Cheers Link to post Share on other sites
nest Posted December 4, 2014 Author Share Posted December 4, 2014 Interested in zisco front mount and ignition leads, I'll pm you later as at work bud, or you could pm me.Cheers PM'ed Link to post Share on other sites
NewbieLewby Posted December 4, 2014 Share Posted December 4, 2014 who got the shell, are they on here? Link to post Share on other sites
nest Posted December 4, 2014 Author Share Posted December 4, 2014 Not sure he got through to me via text, hes not 100% sure yet so if he decides not to have it will be straight back up for sale. Updated pictures of the shell showing fuel cell and front mount and the shell itself Link to post Share on other sites
NewbieLewby Posted December 4, 2014 Share Posted December 4, 2014 Got so much potential, will be intresting to see what becomes of it Link to post Share on other sites
_shaun_ Posted December 4, 2014 Share Posted December 4, 2014 Any more info on the link ecu? Like is it just the ecu Link to post Share on other sites
nest Posted December 4, 2014 Author Share Posted December 4, 2014 Any more info on the link ecu? Like is it just the ecu the ecu came off a glanza running a forged engine with a tdo5 kit, the map has been untouched since coming off this glanza, it comes with the plug however it needs connecting onto the wires coming out the ecu side, here is a link for more info on the ecu: http://www.linkecu.com/support/documentation/g2-g3-engine-management-documentation/LEMG3 I will take pictures of the loom side so you can clearly see what it comes with. Link to post Share on other sites
nest Posted December 5, 2014 Author Share Posted December 5, 2014 HT Leads sold Link to post Share on other sites
Mk3 silver gt Posted December 7, 2014 Share Posted December 7, 2014 Hb3 headlight connectors at all? Link to post Share on other sites
nest Posted December 7, 2014 Author Share Posted December 7, 2014 Hb3 headlight connectors at all?You have PM ShellDashBrakeswheels all back up for sale now due to time waster Link to post Share on other sites
Recommended Posts