decdd19 Posted January 3, 2016 Author Share Posted January 3, 2016 it moves safely ha finally got around to bleeding up the brakes ,took 3 attempts to get all air out of system , but she stops and stops well evening got to bring her up the road a few times tidied up all engine bay wires and hid the defi wiring in the bay as best i could also got the fan wired up and working picked up a very clean set of headlights with carbon eyebrows and hope to have indicators next week ordered blue silicone vaccum caps , blue silicone pipe for dumpvalve and blue silicone pipe where fmic piping meets the intake mani...probably a few other bits missing but overall delighted that its moving really need a decent steering wheel now poor thing is screaming out for a rear lip to Quote Link to post Share on other sites
karl. Posted January 3, 2016 Share Posted January 3, 2016 Looking great lad. Really coming together! Have you got a front bumper? Quote Link to post Share on other sites
decdd19 Posted January 3, 2016 Author Share Posted January 3, 2016 Not yet hoping for a genuine varis or livesports type b to come up for sale Quote Link to post Share on other sites
decdd19 Posted January 10, 2016 Author Share Posted January 10, 2016 not much to update fitted a few bits id been hiding an gathering cusco front strut , pillar strut and floor brace (didnt know they made one or do they??) picked up a zigen pro racer that i think has custom pipe work as its 2.5" stainless steel straight through has a very nice note suspension got the full check over fitted new droplinks to front arb and also considering doing away with the green tein top mounts and adding cusco top mounts to keep it all inline with the blue theme in the bay as the green just looks odd now ha water temp sensor adaptor landed and have it fitted blends in well still waiting on intercooler silicone pipes and silicone pipe for my dumpvalve and the vaccum blanking caps no more expenditure until i find me a genuine varis front bumper because guranteed itll come up when i spend my money else wherebut i know of a set of vented wings that might be coming up for sale so that could change my mind ha some pics of shiny cusco goodies Quote Link to post Share on other sites
Gainzy Posted January 11, 2016 Share Posted January 11, 2016 Never seen that floor brace before! Love cusco stuff Quote Link to post Share on other sites
decdd19 Posted January 11, 2016 Author Share Posted January 11, 2016 Never seen that floor brace before! Love cusco stuff never seen or heard of them doing one but seems legit exact same quality as pillar brace Quote Link to post Share on other sites
Gainzy Posted January 11, 2016 Share Posted January 11, 2016 Looks very nice! Quote Link to post Share on other sites
Ep82gi Posted January 11, 2016 Share Posted January 11, 2016 Love following this build man the cusco floor brace is sooo cool love it. Keep it up man. Quote Link to post Share on other sites
decdd19 Posted January 11, 2016 Author Share Posted January 11, 2016 Thanks lads much appreciated still loads more to come ha Quote Link to post Share on other sites
decdd19 Posted January 17, 2016 Author Share Posted January 17, 2016 Picked up a set of mc chu wings , the jury's out on whether there genuine or not few people have mixed opinions , and they are absolutely gorgeous haha 😊Wepr kit is ordered should be here in 3 or 4 weeks 😊Fitted momo steering wheel and sorted the interior wiring an plastics actually feels like a car inside now badly needs to be cleaned out though ha Quote Link to post Share on other sites
nikhilkamdar12 Posted January 17, 2016 Share Posted January 17, 2016 Lovely wings there mate, will look awesome Quote Link to post Share on other sites
ChrisLeeBoost Posted January 18, 2016 Share Posted January 18, 2016 Must be off tuites Glanza them wings shame to see it broke Quote Link to post Share on other sites
decdd19 Posted January 28, 2016 Author Share Posted January 28, 2016 Must be off tuites Glanza them wings shame to see it brokeyeah wasnt going to miss out on them progress is slow at the minute trying to sort an abs issue and wepr kit has the funds dried up :twisted: picked up a standard steering wheel for test and have my clocks all rebulbed and fitted car was complete inside for all of a day then i went rooting at abs pulling dash back apart ha :bounce: done a deal to get my old bumper back , abit butchered lol , along with a set of jam skirts supposedly genuine , prefer how the car looked without a bumper :cry: intercooler is to small doesnt fill it up enough or something got polybush exhaust hangers and finally my vaccum blanks finally arrived also fitted other new silicone pipes at dump valve and throttle body :cheers: cat has also been sourced only a few more niggly bits an she"ll be off for test Quote Link to post Share on other sites
parker85 Posted January 29, 2016 Share Posted January 29, 2016 Is there a jam stamp anywhere on the skirts why i ask is i got a set and was told they wer genuine but cant find anything to say they are Quote Link to post Share on other sites
decdd19 Posted January 29, 2016 Author Share Posted January 29, 2016 Jam stuff doesn't be s Quote Link to post Share on other sites
decdd19 Posted January 29, 2016 Author Share Posted January 29, 2016 Stamped * Quote Link to post Share on other sites
ChrisssAhhh Posted January 29, 2016 Share Posted January 29, 2016 looking good Dec when's she in for nct? Quote Link to post Share on other sites
decdd19 Posted January 29, 2016 Author Share Posted January 29, 2016 Book as soon as I sort the abs issue .. was gonna book it the other day as I thought there'd be a waiting list but could have it in a few days so didn't bother ha Quote Link to post Share on other sites
decdd19 Posted February 14, 2016 Author Share Posted February 14, 2016 Bit of an update haven't really had time to look at her the last few weeks got her a nice Valentine's pressie got rocker cover smoothened and polished and catch tank polished Exhaust fitted with cat an polybush exhaust hangers Picked up a livesports type A lip bit of encouragement from francy glanza will leave me with a little bit of a different looking V from the usual Standard wheel in for test have to tackle the abs issue now as I need to get it tested Quote Link to post Share on other sites
ChrisLeeBoost Posted February 23, 2016 Share Posted February 23, 2016 Can't wait to see a big dirty tubby in there what wepr kit did you order bud? looking very sweet as always!! Quote Link to post Share on other sites
decdd19 Posted February 23, 2016 Author Share Posted February 23, 2016 Surprised myself with choice of kit love me a top mount but went with the gtfs kit just because the pipework will be stunning in the bay lol ah it's not far off road haven't had time lately to go near it an have an abs issue Quote Link to post Share on other sites
Zoib_786 Posted February 24, 2016 Share Posted February 24, 2016 Epic build this! Quote Link to post Share on other sites
whitestar Posted February 25, 2016 Share Posted February 25, 2016 How did you get the C-pillar brace fitted with the seat belts still on? I have a ZEP brace waiting to go in. Did you have to cut any plastics or did you use some washers or something? Quote Link to post Share on other sites
decdd19 Posted February 25, 2016 Author Share Posted February 25, 2016 I actually forget to be honest mate IL have to check but I think I had to trim some of the plastic off, I removed the cap that covers the bolt completely and then trim a little nothing major Quote Link to post Share on other sites
whitestar Posted February 25, 2016 Share Posted February 25, 2016 If you can check it would be nice! Is the seat belt flange pressed tightly in between interior plastics and brace or is it still loose as it originally is? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.