Kirkyyb36 Posted December 25, 2014 Share Posted December 25, 2014 Im running a ct9 turbo the now. But in the near future im looking at around 280/350hp, im wondering what turbo would be best? And if i could do it for under 5kCheers Quote Link to post Share on other sites
Gainzy Posted December 25, 2014 Share Posted December 25, 2014 I reckon a blitz k26 would go down nice or even Greddy TD05 even a billet TD04 for the 280 mark 1.4 bar would be comfortable with LSD can't go wrong imo ask wepr they seem to be running the turbo set up shows these days Quote Link to post Share on other sites
Kirkyyb36 Posted December 25, 2014 Author Share Posted December 25, 2014 Well ive been looking at gt28's, theres videos on youtube they are unreal! I think an lsd will be a future purchase :-) Quote Link to post Share on other sites
TurboTobz Posted December 26, 2014 Share Posted December 26, 2014 Buy ps2Get need for speed underground 2check stage 1 2 and 3 mods.Or use the search bar on here...Iirc stage 4 is like 756bhp territory so wouldnt aim for that Quote Link to post Share on other sites
Sefton-EP91 Posted December 26, 2014 Share Posted December 26, 2014 Buy ps2Get need for speed underground 2check stage 1 2 and 3 mods.Or use the search bar on here...Iirc stage 4 is like 756bhp territory so wouldnt aim for thatLmao need for speed! Quote Link to post Share on other sites
mattyD Posted December 26, 2014 Share Posted December 26, 2014 Buy my kit and save a load of money...shes waiting lol! perfect for what you need haha Quote Link to post Share on other sites
daniel_g Posted December 26, 2014 Share Posted December 26, 2014 You could probably do the power side of things for 5k or close but then youd still need to do everything else, brakes, suspension, handling, gauges, maintenance etc. to even put the power down and make use of it.Few rough guide prices, bare minimum parts really. Theres a lot more you should buy.Used forged engine - 1.5kUsed GT28 kit - 1.2kInjectors - 150Used EMU - 400Mapping - 400Good EBC - 200FMIC - 200The list goes on theres a load more parts to buy if youre doing it properly. Quote Link to post Share on other sites
mikey4410 Posted December 26, 2014 Share Posted December 26, 2014 u could just upgrade to a ct9 hybrid in the mean time to satisfy your urge. Quote Link to post Share on other sites
5e colin Posted December 26, 2014 Share Posted December 26, 2014 just upgrade to td04 on a budget kit and run 1 bar that can be done for very cheap Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Need for speed 2 was the shit! Well im wanting meister r coilovers will they do suspension wise? And also im remapping my car when its finished with a greddy emanage blue will that cope with 300hp? And i have an hks fmc Quote Link to post Share on other sites
dangeestarlet Posted December 26, 2014 Share Posted December 26, 2014 Just buy a forged glanza already done for 5k Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Would love mine though at that power, not really bothered how much i spend aslong as its done right :-) Quote Link to post Share on other sites
Gainzy Posted December 26, 2014 Share Posted December 26, 2014 Need for speed 2 was the shit! Well im wanting meister r coilovers will they do suspension wise? And also im remapping my car when its finished with a greddy emanage blue will that cope with 300hp? And i have an hks fmcThey say emu for over the 300 mark that's what I would go for but do plenty of research if I had the cash I would go for a forged 5e ct12 set up never seen this set up on here everyone seems to follow suit buy things new so you get warranty least that way things go smooth good luck with the build Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Thanks mate, will start looking into it in the near future. Just hopefully have my car finished soon then i'll look at bigger things! Quote Link to post Share on other sites
Gainzy Posted December 26, 2014 Share Posted December 26, 2014 Thanks mate, will start looking into it in the near future. Just hopefully have my car finished soon then i'll look at bigger things!I have always said you can over power these simply because of how much they weigh, too much power can kill the drive imo, how quick you can reach the power that's what I say but that's just me, one step at a time, alot of people rush and push and lose interest and end up breaking or selling, wack a build thread up get the ball rolling! Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Well my idea was running the car for a year on the ct9 and along the way get forged rods, pistons etc. then save up for the next thing, but i do understand there will be an obvious problem with traction😓 Quote Link to post Share on other sites
Ollieh17 Posted December 26, 2014 Share Posted December 26, 2014 Well my idea was running the car for a year on the ct9 and along the way get forged rods, pistons etc. then save up for the next thing, but i do understand there will be an obvious problem with traction😓Wouldnt even bother wasting money on a ct9 setup, its my biggest regret. Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 It was just to get me used to the 4efte engine and its my second car so it will take abit of getting used to Quote Link to post Share on other sites
Ollieh17 Posted December 26, 2014 Share Posted December 26, 2014 Not alot to get used to mate! Pretty simple cars Quote Link to post Share on other sites
daniel_g Posted December 26, 2014 Share Posted December 26, 2014 Decent setup TD04 240bhp+ with quick spool is more than enough for most people. Quote Link to post Share on other sites
Addymk2 Posted December 26, 2014 Share Posted December 26, 2014 Decent setup TD04 240bhp+ with quick spool is more than enough for most people.For quick spool I'd go TF035 personally, then if the engine ever does get forged upgrade from there. Underrated turbo. Quote Link to post Share on other sites
daniel_g Posted December 26, 2014 Share Posted December 26, 2014 For quick spool I'd go TF035 personally, then if the engine ever does get forged upgrade from there. Underrated turbo.Thats whats good about the TD/VF manifolds, you can swap out the turbos very easily, anything from a TF035 to a VF22. Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Well td04 is a bit standard for me and common, i just seen socks had a gt28 and was running decent power :-) Quote Link to post Share on other sites
daniel_g Posted December 26, 2014 Share Posted December 26, 2014 Well td04 is a bit standard for me and common, i just seen socks had a gt28 and was running decent power :-)Theyre common for a reason lol. If you dont want a TD04 then some kinda VF is a decent alternative, like a VF24. Quote Link to post Share on other sites
Kirkyyb36 Posted December 26, 2014 Author Share Posted December 26, 2014 Very true, well i was on monster Motorsport and they do some big turbos! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.