Gilly Posted March 11, 2015 Posted March 11, 2015 haha im tempted but its finding a decent way of securring the mesh etc.I can't run a filter on mine because there is no room, I've found the best way to secure the mesh is to use a decent strong jubaliie clip, just make sure it's tight. I would run a filter but there is zero room like yourself. Also keep an eye on the mesh from time to time as well. I have never had any problems so I'm sure it will be fine. Quote
Gainzy Posted March 11, 2015 Posted March 11, 2015 I can't run a filter on mine because there is no room, I've found the best way to secure the mesh is to use a decent strong jubaliie clip, just make sure it's tight. I would run a filter but there is zero room like yourself. Also keep an eye on the mesh from time to time as well. I have never had any problems so I'm sure it will be fine.Just avoid the beach and change the engine oil often Quote
RobSR Posted March 11, 2015 Posted March 11, 2015 (edited) I run mine open never had any issues..depends if you can afford for it too go wrong tho i suppose. Wouldn't personally mesh it..a) its quite restrictive and b ) theres a very high chance it'll suck it in if you turn it upto 2 bar. Cant you get a tight 90 degree bend on that? Hard to tell from the pic! Edited March 11, 2015 by RobSR Quote
akaye4000 Posted March 12, 2015 Posted March 12, 2015 mine looks just as tight as that and I got a 90 on it but had the cut down the length of joiner Quote
RichWillmore Posted March 12, 2015 Author Posted March 12, 2015 I can't run a filter on mine because there is no room, I've found the best way to secure the mesh is to use a decent strong jubaliie clip, just make sure it's tight. I would run a filter but there is zero room like yourself. Also keep an eye on the mesh from time to time as well. I have never had any problems so I'm sure it will be fine. Thanks for the heads up pal, no harm in trying it Just avoid the beach and change the engine oil often NOTED ! Ahaha I run mine open never had any issues..depends if you can afford for it too go wrong tho i suppose. Wouldn't personally mesh it..a) its quite restrictive and b ) theres a very high chance it'll suck it in if you turn it upto 2 bar. Cant you get a tight 90 degree bend on that? Hard to tell from the pic! Yeah we'll see. The outlet is 50mm on compressor housing and there isnt 50mm of room between the remote head lines & turbo. Its a tricky one, although it wont be ideal, mesh MIGHT be my only option. I'll try a few things out first & see how i get on with the mesh. mine looks just as tight as that and I got a 90 on it but had the cut down the length of joiner It is very tight, got any pictures bro? Thanks Quote
EPDamo Posted June 13, 2015 Posted June 13, 2015 hi bud, any more progress on the build? Love this car! Don't suppose this was up lakeside the other week? Quote
RichWillmore Posted June 27, 2018 Author Posted June 27, 2018 So after a long time of this being neglected - the work has continued. Things to do; Finish installing windows New Water Lines for TD05 New Wheels - Ordered Tidy up interior Re-Map (Suggestions) And then hopefully, we are good to go ! Where has everybody been getting there Glanza's Mapped recently and what sort of results are we looking at ? Are TD still the top dogs? Thanks People Quote
RichWillmore Posted June 28, 2018 Author Posted June 28, 2018 Yes mate - literally haven't had the time nore money until recently. It'll be out this year for sure. Rob - Who do you recommend for mapping bud? Quote
jayc-glanza17 Posted June 29, 2018 Posted June 29, 2018 People just go with local or a decent tuner for the ecu they have chosen.. Glad it still lives on man.. Quote
jellybaby Posted June 29, 2018 Posted June 29, 2018 Depends on budget and location I would recommend tourqe development international they based lake side mark the owner is a top bloke and tune f1 cars so they shit hot Quote
Jay85 Posted June 30, 2018 Posted June 30, 2018 3 hours ago, jellybaby said: Depends on budget and location I would recommend tourqe development international they based lake side mark the owner is a top bloke and tune f1 cars so they shit hot Jelly, you Essex/Kent based? (Sorry NS for the hijack!) Quote
jellybaby Posted June 30, 2018 Posted June 30, 2018 I live in colchester essex feller 20 mins away from Ns Quote
Jay85 Posted July 2, 2018 Posted July 2, 2018 11 hours ago, jayc-glanza17 said: Im rayleigh @Jay85 Dude, we are trying to sort a meet at bluewater. Come along if you’d be up for it? Thinking 24/08 Quote
jayc-glanza17 Posted July 2, 2018 Posted July 2, 2018 Can do. What meet isit? Is that a friday? Quote
Jay85 Posted July 2, 2018 Posted July 2, 2018 17 minutes ago, jayc-glanza17 said: Can do. What meet isit? Is that a friday? Just trying to get some starlets together from local area! Yea it’s a Friday, thought maybe food and a chat! Quote
jayc-glanza17 Posted July 3, 2018 Posted July 3, 2018 2nd friday of each month.. We do that this side of pond.. for passion jap.. at brentwood halfway house.. Quote
Jay85 Posted July 3, 2018 Posted July 3, 2018 50 minutes ago, jayc-glanza17 said: 2nd friday of each month.. We do that this side of pond.. for passion jap.. at brentwood halfway house.. Is that all jap motors or just starlets? Quote
Jay85 Posted July 3, 2018 Posted July 3, 2018 23 minutes ago, jayc-glanza17 said: All jap mate. That’s cool, I’m trying to get a bit of a starlet community together so we can then turn out to stuff like this in numbers. Quote
Neversimple Posted July 5, 2018 Posted July 5, 2018 I want to be there so much! like a 2 year old in a Cadbury factory right now getting grumpy not being able to choose. I am back in Denmark 24th I think Quote
Jay85 Posted July 6, 2018 Posted July 6, 2018 1 hour ago, Neversimple said: I want to be there so much! like a 2 year old in a Cadbury factory right now getting grumpy not being able to choose. I am back in Denmark 24th I think Booooo..... that is all!!! Lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.