patman

Thought I would start here first if anyone please has a drivers side window motor for a mk 2 GT Turbo, got it wrong in the title sorry Thanks Pat

Just of the top of my head mate, can you not get a very thin flat head screwdriver and tap it with. Small mallet/hammer so you can push it to the centre of the hole and then pliers to pull it out? Give it a good spray first obviously it's stuck in, just an idea mate

Not very mate but best Thing to do is follow the wire, on my GT its a blue wire which runs through the injector loom, first things first trace that wire and see if its broken they are known to do this over the years 👍🏻

I know it could be a heart breaking moment mate but that's the best thing to start with as not worth spending money on other things if there's a chance rings or something along them lines have gone, hopefully your numbers will be near enough the same over all 4 mate

Yep your need some shielded wire if it is the wiring

What was your compression results? Across all 4 cylinders? Taking the plugs out and turning the engine over is not a test mate, you need to see what numbers your getting

Thankyou very much hope you get this issue sorted soon too 👍🏻

Yes fully synthetic, I do believe quote me if I'm wrong here fully synth is an all round thinner oil then semi synth, if that's the case on my next oil change can I swap 5w 40 fully synth for 10w 40 semi synth or does the oil need flushing or something? Thanks Ps sorry for hijacking your thread

Following this, even though mine is fine in traffic, I bloody hate the fact everything gets hotter obviously in traffic, sitting there for god knows how long, water temp going up and oil temp going up, and of course oil pressure dropping where oil is getting thinner, Can I ask funny onion when your stuck in heavy traffic for ages what pressure does your oil pressure gauge say please, when it drops of course what it can go down too

And this this as good as toyota quality? As rocker covers like to leak?

Can I ask what you did with the little pipe that goes from the inlet to the top of the canister please mate 👍🏻

Have done mine ben mate on the GT

👍🏻

I got a tps which originally came from the jdm-ep site, but never used it, but I can't post till weekend, so if you still haven't found one by then please pm me 👍🏻

Bump

Bump

Please could you let me know Martin Thanks pat

.

As the title says please guys anyone have an ep82 drivers side door handle, if they come in a pair that's good too Thanks Pat Also prefer black but will consider other colours as will need spraying thanks

If you get it mate or already have it it needs to go on a rolling road like today, now, tomorrow, asap to make sure its running right

I wouldn't even buy this and walk away

Oil pressure mate do you have it in psi or bar, also did you follow the instructions on how where to put lambda sensor thing in the exhaust, 36 odd inches from turbo and 10 degrees etc

Look at this on eBay: https://www.ebay.co.uk/itm/272498960992 Car Combustion leak tester head gasket 30ml. fluid, 15 tests Free P&P 1st class 👍🏻

If your that stuck mate ring magacore (however you spell it) that's how I got my king lead mate 👍🏻