Chief Quimby
-
Content Count
209 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Chief Quimby
-
Yep.
-
Nice video
-
Could be interesting to know, what orther people with speedvision cams did, and what degree with 1mm lift, or they just installed them, and wondered why they didnt work
-
When you buy cams, there is supose to be som specifacation on them. There is not on those speedvision, so i did them, something near 2jzgt, because they have almost same stroke. I am running adjustebel camgear too
-
Well, you have to mesure them with micro meter Watch( think it is call), i put mine on 108 degres at 1mm lift. I dyno it at 396hp at 1,85 bar, som i would say they Work just fine.
-
Did you time everything, or just put them on the marks. Running them too, and had almost same problem.
-
Yeah , i will shop there Again, they helped when i had som trouble with credit Card.
-
You need corner weights to adjust it.
-
You must have 5bar on fuel then , because 234hp on 330ml injectors is ALOT
-
Because of emmision, new engine oil for road cars, dont have much zinc in it. Tractor dont need to worry about that, Know a few running with this oil, on their 1000hp 2,5L Volvo engine. Mabey because Volvo is a tractor,
-
Some good quality tractor oil.
-
The ecu is not better than the guy who tune it.
-
You are doing it the wrong way, first you deside WHO you want to tune it, then let him deside what ecu to use.
-
I am running 33psi with my 17pound plugs fro 4age.
-
Well is does that stock. So dont know what you mean.
-
We ran 0,8 a few times on stock compression. But her we cant adjust timing, so need to lower compression
-
Well i was wrong. Shaved off 3 mm :-).
-
Ran my own 4ef(t)e for years. Never had any problems
-
Yes this will do the same.
-
http://www.turbomotor.dk/contents/da/d11.html
-
Yes. And we shaved of 1mm on pistons to lower compression
-
Running a mapconverter to adjust fuel only.
-
They are pretty strong. Shaved of 1mm on pistons, installed china td40 turbo and ran 1,1 bar. Think is is pretty cool.
-
being tempted by cheapy chinese forged conrods, what do peeps make of them?
Chief Quimby replied to Chops's topic in Engines
Gorganl2000, like i said before, they often have 3 different quality, also with turbo, those on ebay, you have to be careful -
being tempted by cheapy chinese forged conrods, what do peeps make of them?
Chief Quimby replied to Chops's topic in Engines
Well, i have seen people break fhe rods here in denmark, never seen any break those china rods. Those we use here, are so big, that you have to modifi the blok to fit them. Beside pauter, they are all made in china