ChristopherEP70

When they finally get released here in Ireland they will just shy of €50k which is a bit steep

You must have a left hand drive? There is an irish EP70 group on Facebook that might be able to help. Is this any help? https://www.online-teile.com/toyota-ersatzteile/6749610030_Abdeckung/Rahmen.html?language=en

The part number is 67496-10030 the part is discontinued from Toyota but try Google the part number or search the part number on ebay and see if anything puts up. Might be worth calling a Toyota dealer but might be a long shot

I might have one, will check in the morning

Excellent work. Have a few of those gauges in my car, other than getting them fitted in pod they seem pretty good quality

From a quick search there's figures of 5.31ft wide and 12.46ft long, how accurate they are I don't know

Instead of a relay you could just wire it to a switch, have an in line fuse and should be fine

I used Levin twin pot calipers, Mr2 discs and E10 Corolla carriers. Had to do a tiny bit of grinding but all bolted up perfectly

https://flos.ie/shop/starlet-ep70-rear-spoiler/

Nice base to start off with. I do think 205 black is the best colour for them

The loom cost €100, I don't know if the fella is still making them or not but I've one I'm not using if your interested ? If you can pick up a full Glanza for the right money that's what I'd do. Would make life a bit easier

Its actually not that much work. I used the glanza ECU,ignitor,coil, had a loom made to run the engine with a positive and negative to get the loom working,used the original starter,alternator etc and had the original loom working these parts. Used aftermarket gauges for oil temp,oil pressure,water temp etc. Used the Glanza drives,wishbones,brakes,discs etc. Used the glanza fuel pump in the original tank but it can run dry if you corner hard as theres no baffles in the original tank but you'd be better off with a better set up as it's a bit of a pain

Cheers man!

Haven't updated this is a long. Really need to get it out and give it a proper clean. Few small bits and pieces to do like paint the back bumper,seat rails and the odd part here and there. Pretty much how it's looking now

I think the lot number on the top left should be facing up so that would be the right way

I was going to order from Amayama, how accurate is the stock level. Says 10+ for the parts I'm going for which some toyota told me were discontinued ?

Would I be right in saying there is a difference in the 4efte sumps? Have a ep82 sump and oil pick up but the pick up doesn't fit as it hits off a main cap on a ep91 engine

This lad is selling side moldings but worth asking if the bumper is there https://m.ebay.com/itm/JDM-TOYOTA-STARLET-EP91-4DOOR-COMPLETE-BODY-MOULDINGS-AND-SIDE-SKIRTS-OEM/272050631992?hash=item3f577b3538%3Ag%3Aqd0AAOSwkZhWTek1&_nkw=Ep91&_from=R40&rt=nc&_trksid=p2380057.m4084.l1313.TR7.TRC0.A0.H0.XEp91.TRS2

I'm using e10 corolla carriers with mr2 discs

Halfords is probably your best bet so

Try a clay bar on it. It should remove it. Something like Bilt Hamer clay bar

My rear calipers were pretty bad so decided to rebuild them. Handy enough to do but a bit fiddly. Also changed the two pistons while I was at it. Picked up a rear bumper for it as it seems to be the only real mod with regards a rear bumper. Also have MR2 skirts there for it

*cough* b18 *cough* Seriously cool little. Can't remember the last time I seen one

Got it Motorsport 7 with a deal on the One X. The graphics are unbelievable in 4K. Find it hard to enjoy Forza Motorsport because I'm so fond of the open world in Horizon 3. Horizon 3 is in HDR on the One X. It's supposed to be getting a 4K update in the new year

Yes!