shorty

It just allows for less rotating mass and for less resistance tbh. id say response is a tad better but not on a massivly noticeable level and yes its lighter bit again not by a crazy amount. thing is its a small difference on its own but with a fully ballenced bottom end and a light weight fly its all complimenting eachotger for a bigger improvement over stock. as a single mod i wouldnt waste the money but as part of a high spec build up i personaly think every thing you do has a direct effect on other components and for the best result all parts should be improved apon. Here is a stock jdm 4efe crank a stock 4efte you can already see the 4efte crank is of a sleeker shape as stock than an na crank and my knife edged 4efte As you look at mine you can see the overall shape is sleeker and polished to remove as much drag as possable but again the 4efte crank is already an improvement over the na crank. so aplication depending you arnt nessiseraly loosing out buy not running one and plenty of lads run big power without them. it all depends on what you want out of the engine and what set up you will run i guess. Hope that helped a little and sorry for the crappy pics lol

Nice dude. good to see you getting back into it.

Great day! track looked wicked to drive on and the starlets defo held their own on track!!! 5hour drive home sat in silverstone traffic sucked a bit though lol

Any engine engineering place should do it but make sure its done right. i have one in my forged engine and its a shame you cant see it lol its stunning to look at. mine was nitempered (think that was what it was called) too wich is a heat treatment process to ensure the crank remians strong.

Yes we are dude not a clue what time though mate we are very disorganised this time as amjads not there lol

Link for bungs please hun also you not cable tie or jubilee clip any of you vaclines in your bay??

not early enough dude take around 3-3.5 hours to get there so will be leaving by 4.15 id say lol

Pm price delivered to southampton for oem map sensor and coil/ignitor pack please

Run with out a dv then with i gaurentee you you see quicker spool. I've tried plenty of turbo setups and combos over the years and flutter slows down turbo respones. your mapper may do well using gas to help spool and head work and all that but even after all that if you add a dv you will still see improvements. removing the compressed air from the run and mainly from befor the tb aids response.

Lol futter isnt good full stop. if it was ok why would manufacturers waste mony on producing recirc valves?? Next you will be saying anti lag isnt bad for turbos either.

Dont see why not like i say good few plug n plays lift to around 8000rpm think mines and sard iirc maybe worth a quick search but should be fine bud. Edit. didnt realise its because power is dropping of early though. raising wont help mate

Matt u gay lol i realy want the seat haha wish id known last week! Sooooo you or any of the lads coming to fest 2?? Lol

Why not? Some plug and play ecu' raise it another 500rpm or so. just dont go too mad!

^^^ A-men brother!!

More boost more flutter. its a bigger turbo so .6 bar is like blowing down a cave, its not realy doing much to push the turbo. also flutter is gay!! It kills turbos fact! Its called compressor surge and its air backing up against the turbo and even more comicaly makes the car more laggy!!

A fair few cars get broken for parts over here dude. is like anything on a good day it sells on a bad day it wont. Market is nothing like it was 3-5 years ago atal!!

Niiiiice! Dont see many in black so good to see it living on dude

Put in mine and deebo my brothers orders 1) turbo Grant - Large white with green text 2) Akyakapotter - small - black - white text 3) Tara - what ever size 10 is - yellow - black 4) SiCaln - Large blue with white text 5) Drongo boi - Large orange with black text 6) Drongo boi - Medium orange with black text 7) Pandamonium - Large black with Hot Pink Starscream - Medium Navy with orange 9) ViKaln - I'll take one for the mrs - medium blue with white text 10) Lottie - jumper dark purple, yellow text, medium 11) Shorty - medium t + medium hoodie - black - white text 12) Debbo - large t + large hoodie - white - red text

Jumper as in sweatshirt lottie as in hoodie with no pockets or hood or zips etc lol

Your number plate as with your tax disc MUST be visable from the front of the vehicle! As for rules on displaying thats where it ends. could mount it on the roof if you like as long as its visable from head on. so yes a stcky plate in the widscreen counts as long as the size and fonts/colours comply with british number plate standards.

I've bought tons of cylinder heads over my starlet time (not sure why I've onl ever ran 3 of em lol) bout 80-120 for full head with valves cams and springs etc. chin up dudet new head at some point job done ;) also did you ever change to a wepr oil return or still ran oem? Pm sacha too as the wepr manis are life time gaurenteed. i know its sorted now but im sure he will be keen to here it cracked hes a sound guy he maybe able to offer some kind of help/appolagy.

Ah thats proper gay dude this car needs to see track! On a side note pm me a price on you emu if you gonna sell it on as im looking for a quick solution for the 85 till it goes standalone next year some when ;)

Welcome mate! Im sure you will enjoy the english starlet scene! Plenty off meets and shows to get along to.

Bump

Ill be there john and you can spam all ya like ;)