ste91

Those are the articles I've already read and pretty much the only information on them that I can find. TD04L/TD04HL and HE221W/HE211W are so similar just one letter or number different it's easy to get them mixed up but yea I've already been through those articles and videos a few times. Doesn't look like anyone has actually tried it though.

Anyone else got any experience with these turbos? The HE211W has identical turbine wheel dimensions to a TD04L and it's a straight swap, making the 221 a direct fit as most of us have manifolds with the 3 bolt TD04 flange.

There were a few genuine HE211W's on ebay a few months back but they're all gone now, so probably stick with a TD04, at least you know what you're getting. I am interested to see what the HE211W is like compared to a TD04 on spool times though, as the turbine wheel dimensions are identical, it's supposedly just a modern update on the TD04.

Yeah I don't think I'll be revving it to 8000+ rpm haha There is another turbo I'm considering but no one seems to have heard or know anything about it - Holset HE211W. The turbine wheel dimensions are identical to a TD04L and the housings are interchangeable. Supposed to be capable of over 300bhp and fast spooling.

Is anyone running a TF035 (6cm²) on a 5E? I'm going to be building a forged 5E soon, aiming for in the region of 240-270ish bhp, not really chasing numbers just want a decent amount of usable power, I've heard of TF035's making 240-250 on 4E's and of course the old tried and tested TD04 is capable of 270 odd. 240-250bhp would probably be "enough" and I'm thinking a TF035 on a 5E would be nice and responsive with plenty of usable mid range power, just concerned about it being choked at the top end. I already have a TF035 6cm² which I originally bought for my unforged 4E but I'm going do

Following this on instagram, your Glanza looked really good I did see it at one of the shows last year, Japfest Silverstone I think it might have been, be interesting to see how this one turns out, any plans for EP71 turbo bodykit or going for a sleeper this time around?

Can't believe I posted this in 2018 and still not got the TF035 fitted! A lot of delays on various bits and pieces and now delayed by the virus but got some nice parts ready to fit, ceramic coated WEPR kit, ME221 ECU plus some upgraded sensors, new fuel pump and pressure regulator along with 370cc injectors. Looking forward to getting it done just hope the old 4EFTE holds up afterwards lol..

I occasionally come on here and have a quick browse but don't really bother posting much anymore and I expect a lot of others do the same, it's just not what it used to be. It's funny that there's still so many old names around after all this time though. I wonder if it's worth posting in the progress blogs does anyone even read them now?

Just been browsing and reading some old posts, disappointed to see no activity on the forum anymore, it used to be buzzing back in the day, I joined here in Feb 2008 so that's almost 10 years of being interested in Starlets, still recognise most of the names on here! It's nice to finally have a Glanza after all this time, back when I had my n/a EP91 I thought a TD04'd Glanza was the coolest thing on 4 wheels and now I've got one which is currently on a CT9 hybrid soon to be TF035. But it seems the Starlet scene is nothing like what it used to be, often see tatty Glanzas which have fallen in

Turbo turned up yesterday, got it for a decent price on ebay and it's in very good condition. TF035HM 6cm² from a Forester. Does anyone know the exact spec of the compressor wheel on these? Usually they're in the name i.e. TD04L-13T-6 but there's no compressor wheel code on the TF. Got a few other bits to sort out first and then it'll be fitted and mapped, hoping to make 230-240bhp.

Has anyone gone from a hybrid CT9 to a TF035HM 6cm²? Spotted one yesterday and bought it, it was a bit of an impulse buy but it was at the right price and looks to be in good condition, if there's no shaft play then I'll easily be able to sell it back on for what I paid so nothing to lose anyway.

What's the score with TF035's, I've done a lot of searching but there's just random bits of information thrown around and no clear answers. I'm currently on a CT9 hybrid running 0.9 bar, standard internals, apparently 200bhp. Aiming for 230ish bhp. Don't really want to go TD04 as I'd rather not push it too hard on standard internals and it seems a bit pointless using a TD04 when TF035's can still make ~230 bhp but spool quicker. Has anyone got any dyno graphcs or any info on 4cm² vs 6cm² and spool times and peak power etc...? A lot of posts on here are just "I've got this and it's the

Already seen mate but he wants £100 for them and I only really want some cheap standard ones to chop up.

I'm after some seat rails to fit a Glanza, can collect if not too far from the west midlands, don't need to be fancy ones some standard ones that have been cut off from the seats are fine.

I was thinking this exact thing myself. 200bhp on a CT9 would be ideal for me. I was mainly thinking the wear on the gearbox and other components why it would be better to just keep the power on the low side. I'm sure I'd get bored of 200bhp pretty quickly. It really depends what sort of road you're on, twisty B roads it's fine and feels like plenty of power but once you do a few pulls on a dual carriageway it starts to feel under powered, back in the day it would have been considered quick but things have moved on so much now that standard hot hatches are nearly as quick as a tun

Been thinking about this and the hybrid CT9 I've got is supposed to be capable of 220bhp, it's currently at 199bhp, I suppose really I'd be better off just sticking with what I've got, getting it mapped again and turned up to 215-220 and leaving it alone. Anyone done the same and were happy enough at 215-220ish bhp?

What makes you want to ditch the TD04? What power are you running? I'm really not sure what I want to do yet, always used to see it back in the day where people would chase high power numbers and then shortly after the car would be broken for parts because it had gone too far and was horrible to drive. I'd like a bit more than 200 but without too much lag, so I'm really considering a GT20 as opposed to an old school TD04.

I don't think so mate, the receipt just says CT9 hybrid.

Not exactly local but worth going the distance, TB Developments located in the West Midlands.

Can't believe this has only had 8 views and no replies in 3 hours, back in the day there would be 20 replies and a bollocking for posting in the wrong section.

Sorry if this is in the wrong place, not sure where to post this, it's been a long time since I've been into Starlets so I'm a bit lost on the value of 2nd hand parts these days. Currently running a TD CT9 hybrid, manifold, and decat. Thinking of upgrading to something like a WEPR GT20 or TD04 kit, so just wondering how much I can expect to make back from selling the CT9 kit, the turbo is just under a year old and has been ran at slightly under 1 bar, and I've always left it to warm up and cool down properly. Also thinking about upgrading to a stand alone ECU so might throw in the E-manage

They are nice but not really what I'm after bud

Anyone got any forged 15s for sale? Not looking for anything in particular, just want some lightweight 15's to replace the 16s once the tyres wear out.

I'm sure the UK EP91's have a cut out in the centre of the parcel shelf for where the rear brake light is, I'd prefer a Glanza one, but will keep it in mind. Half tempted to just cover mine with fabric so you can't see the holes

Anyone know what happened to this? Can remember it from back in the day but last post here is from 2015, wonder if it was ever finished