ste91

If using OEM Toyota sensors you will need the corresponding throttle body as well as the sensor and plug, as the mechanism that goes into the sensor is slightly different. I can't remember off the top of my head what the wiring is, but the diagrams are easy enough to find online, I did basically the reverse of this (3 to 4 pin) to use the 4 pin as my ECU requires a variable TPS. I think this is the standard 3 pin: top/yellow: TPS signal middle/brown and white: ECU ground bottom/black and red: throttle closed Your 4 pin auto TPS has a 5v feed which is now redundant,

A whole year later and it's funny seeing this post come back up, car is finally getting a Link ECU fitted now, forged 5E and TD04, I sometimes consider posting a progress thread on here but hardly anyone bothers with the forum anymore

Following this on insta, nice work, not seen one of those radiators on a Starlet before, is it a one off custom job or is it from another car? It's a shame hardly anyone posts on here anymore, used to love reading build threads like this and would post my own but it seems pointless when only a handful of people are going to see it anyway. The facebook groups are no where as good as what forums used to be!

Get them from TB Developments instead https://www.tbdevelopments.com/products/polyurethane-shifter-bushes?_pos=1&_sid=e6dd2702c&_ss=r I only use TB Dev and ID Workz for parts, always been reliable

Have you still got the bonnet, wings, and front bumper?

Update again, turbo still not fitted and car not running 😂 😂 however the new engine (forged 5E) is almost ready and I've now got a billet TD04, only a standard 13T sized wheel but plenty big enough for what I want, going for a Link G4+ and Bosch 550cc injectors as well now

Just came across this build again and realised I was one of the last people to post here back in 2018! Anyone know what happened to it?

Always wondered what these are like, as far as I'm aware there aren't any LSD's available for them, so it's just open front and rear with a viscous centre diff is that right? How does it drive compared to a normal EP91? Notice any extra weight? What are the gear ratios like?

Bought snap off steering wheel boss, Nikhil was easy to deal with, quick delivery and item as described. Cheers

What was the total price if you can remember it? I've been looking at Garrett cores but those ITEC cores look good

How much did you pay for the intercooler core? Also I have the same wastegate also bought from TB Dev and it comes with a variety of springs there's a chart online to show different combinations for whatever pressure you want

I've made my own, don't have any pics but I'll try to explain, I used original feet on universal rails, all bolted together no welding required just a bit of trial and error. Get yourself a set of standard rails and some universal rails like this Cut the feet off the standard rails as mentioned, you might need to re drill the mounting point on the new rail to allow for the front to back distance on the feet. You'll also find that the universal rails are too narrow, so simply cut the release bar and you'll be left with two separate pieces to bolt in. Once you've done that you'll need t

Just spoke to my mate yea that's it he sold it to a lad in Wales, that exhaust used to be on my Glanza lol It's a standard 4EFE but everything else is 4EFTE as far as I can remember, inlet manifold, wiring loom, ECU, injectors etc... a forged 4EFTE would drop straight in but I'd advise getting it on a rolling road and checking the air/fuel ratio just to be on the safe side.

I wonder if there was another owner in between then as this is definitely my mate's car it was him who did the 4EFE-T conversion, but he had cut the middle out of the bumper, does it still have the massive angled exhaust? It does look a lot better with the new bumper though it looked hilarious before, literally cut the whole front out of it and stuck the intercooler in there 😂

I'm sure this is my mate's old car, has it got the front bumper chopped out for the intercooler?

Has anyone successfully swapped a different gearbox from another Toyota into a Glanza? I'm thinking MR2/Celica/Corolla/Yaris rather than the wideley known G6/G6R. I know there's been all sorts of discussion over the years of swapping various gear sets into C56 bell housing but what can actually be done? I had my Glanza gearbox rebuilt last year and it's still useless, takes forever to get into 2nd, crunches a lot, feels like someones pouring a bucket full of nuts and bolts between the cogs when changing gear. Absolutely awful and completely ruins the car and as I'm now spending out for a f

Hi mate what's the total length of the snap off boss? Am I right in saying it is a complete boss kit and snap off in one, as opposed to a Starlet specific boss with a universal snap off?

I'm looking at the same but 550cc, did they plug straight in or need adapters? And were they a direct fit to the fuel rail?

Funnily enough I discovered the Bosch EV14 550's earlier and started looking at them, reasonably priced, especially when you consider a 2nd hand set of RX7 440s plus cleaning/testing will probably set you back £150 anyway, a little extra gets you a brand new set of Bosch injectors with a more modern design, it's a no brainer, the only thing is there are a LOT of these Bosch 550's being sold and I'm skeptical about fakes, can you recommend anywhere reliable that stocks them? Your site only has Injector Dynamics as far as I can see.

I have a mate with a set of 295's that have been cleaned and tested for sale if they're any good to you?

I had the same, checked a few online calculators and they all give out silly results. My next step would probably be a set of 430 (RX7?) injectors as you say, just wondered what I could get away with on the 370's to save the hassle of finding and testing another set. Had a lot of trouble with injectors in the past, waited forever for them to be tested, one set ended up being unusable, another set lost in the post etc...

Can anyone advise on what sort of power figure 370cc injectors are suitable for, keeping the duty cycle relatively safe around 75% max? Also running a Walbro 255 and Aeromotive FPR. I initially bought a set of 370's as my original aim was around 230-240bhp, running a TF035 on a 4E but now I'm stepping up to a 5E and TD04 and hoping to make mid to high 200's power wise, so not sure if these 370's are going to be good enough anymore although I've already had them cleaned and flow tested so it's a little bit annoying if I have to find and test another set.

Not building the engine myself but will be fitting it and doing the rest of the work, haven't got a build thread I'd like to do one although I'm not sure if it's worth it when only a handful of people will ever read it, the forum is barely active at all compared to what it used to be back in the day. I've spent the last couple of years just sorting out the chassis and now it's time for more power I was only intending to run a TF035 on the original 4E but that's on it's last legs hence the new engine, I've been collecting a few nice parts, WEPR turbo kit which I've had ceramic coated, ME221

After a bit of reading and looking at various dyno graphs I've decided to go for a billet TD04, but with just a standard 13T sized wheel rather than a full hybrid. The rest of the setup will be forged 5E bottom end, standard 4EFTE head, WEPR turbo kit, ME221 ECU, and all the usual supporting mods. The only thing I can see potentially holding it back now is the injectors as I originally thought I was keeping the original 4E on a TF035 so got a set of 370cc injectors which I've had cleaned and tested so I'm probably just going to use those, not sure if they're enough for a TD04 at 1.3-1.4 ba

^ you're right, I'm not chasing power figures, I wanted a 5E for the extra cc for more torque and quicker turbo spool to make it more usable on the road. Seen it so many times over the years people build these 300-400bhp cars with fully stripped interiors etc... then realise that it's awful to drive, a couple of weeks later they're breaking/selling it!