TimD
-
Posts
1178 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by TimD
-
Fully booked now I believe, should be a good day, I can't wait!
-
Friend of mine uses AD08R's as wets for racing as he isn't allowed to run a wet tyre, they work really well.
-
First one of the year! http://circuit-days.co.uk/event_info.asp?id=540 I can get it for £130, if you'd like to book then give me a shout before you do.
-
It's on the front of the block just behind the down-pipe, the sender is massive you can't miss it. It's the one pointing upwards, I have the remote T-Piece someone linked above, but had to replace the BSPT adapter from memory as it wasn't tapered enough.
-
Airbag Dash, Standard Parts...Revised Prices, Need gone
TimD replied to nikhilkamdar12's topic in Starlet Parts For Sale
ignore -
I used loom tape, looks ok. I wanted to remove all the plugs and sheaf it using the braided stuff, but figured for something that isn't seen it's not worth the risk of wiring up something the wrong way and introducing a short.
-
You will need 1 bar of fuel pressure per PSI.
-
Unnecessary
-
Looks proper, would like one of these. BGW looks daft though.
-
You went in too fast and lifted, you don't need fancy parts, you just need to slow down.
-
Whats your plans for your money pits over the winter months?
TimD replied to rwdrev's topic in Lifestyle General
Maintenance, track days and buy an EVO V -
I'll eat my own hair if this ever materialises.
-
WEPR GT25 is where I'd spend my money, but then I value drive-ability over dyno numbers.
-
The pin was there, not sure if it was torqued up, one of the few parts of the car I haven't touched, it is now! Maybe that was it? Going to have a proper look around it before it's next outing anyway, thanks for the suggestions.
-
Anyone experienced this? Got to lunch time yesterday at Cadwell and I had some bearing noise, sure enough there was play. Before I called it a day I figured I'd try and nip the hub nut up, I did and the noise/play disappeared.
-
Anything 4 X 100 with an offset around 30 will go on. Mine were off a polo, one of the wheels is a little bruised but they all appear to be round, and as they're track wheels that's all that matters. I might give them a lick of paint at some point to tidy them up. Look ok too.
-
What's the trackday culture like out in Canada?
-
Loads of stuff on ebay! Just takes some searching out, I just picked up a set of OZ SuperTourismos with tyres for £90. I didn't need the tyres, so hope to get some money back from them. I just searched 15 wheels, listed by distance and only showed used ones. Lots of tat but also lots of decent stuff there too.
-
Is it best just to search for G6 gearbox or do they have a code you can use to find them? Anyone got any ratio info?
-
Track day experienced opinions wanted
TimD replied to K24_glanza's topic in Performance & Track Days
A lot of track day organisers insist on roll cages for slicks, something to keep in mind -
Track day experienced opinions wanted
TimD replied to K24_glanza's topic in Performance & Track Days
My 48r's are 195/50/15 -
Look up Corbeau Club sport, cheaper than those and a much better seat.
-
http://www.javelintrackdays.co.uk/trackday/index.php?option=com_virtuemart&page=shop.browse&category_id=923itemid&vmcchk=1&Itemid=1 Last one of the year!
-
Sell without tyres? Feel free to PM me the best price collected, can pop across at the weekend..
-
I've got a JD tuning one, as above, make an offer