klyfax
-
Content Count
316 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by klyfax
-
And front splitters are??? The front seats? Or what?!
-
If the hoses from the cover goes to the tank and the other pipe on the tank is free, it can breath trough the tank...
-
Why leave the other one open for air???
-
I will make sure that he do it
-
I would put both hoses on the cover to the catch tank in a T connecter, or what ever you call it...
-
Hehe he is on holiday, with hes girl, he will be back about 2 weeks... On danish we say: Tillykke med foedselsdagen Martin!!!!!
-
Let the olie return hose sit free in the air. I think there is 2 breathers, both at the cover, one to the manifold and one to the orig. blowoff.... The best position for the blow off is 9" to 15" from the intelmanifold... Your blow off is sitting there to take the "back blow" when you go to idle, then it dosn't hit the turbine... Hope that helps a bit...
-
http://www.nvbackflow.com/inprogress/V--8.mpg V8 The same V8 from Sparky And for those that have seen some tractor pulling... www.micropulling.nl
-
Mine goes to 0
-
Are you running with a LSD?
-
If its a standard engine, you cant feel the diffence.
-
Back pressure gives you HP and NM when the turbo isn't workÃÂÂng (0-2500 rpm) and takes HP and NM after 2500 rpm... This is an exsample
-
The closed we get to a supercar in the force, is a Audi RS6 Avant. (Undercover dog patrol) And some says there are a RS4 with over 400 bhp, but I don't belive it.
-
Have you ever seen a car with roof bars that looked right?
-
Well a standard takes 0-60 mph on 6.9 secs, and runs about 110-120 mph. (Toyota data)
-
Well now I have looked around and I can't find it... But i found a S2000 Start button on ebay, and have bought it...
-
OK... Thanks mate
-
OK it looks like its easy to fit the button. But where have you got the rear lights from?
-
Like the car. Is your exhaust home made? Is it easy to fit a Engine start at ???? (don't know what you call it)? Where have you bought the rear lights???
-
Yeah the glanzas floor is raised. But the Cusco strut bar does not fit at the rear.
-
Then it does not fit on mine at the rear.
-
Yeah, thats correct.
-
Thats good enough, but no one of those is original Toyota Strut Bar. After the weekend I can get a pic of the originals, as I have them both... Is it the same strut bar at front and back?
-
Martin E has a green induction kit. And it has it all, piping, filter and clamps.
-
I have only seen 1996 starlets with a fte manifold...
