Jump to content

Starlet__SR

Member
  • Content Count

    3029
  • Joined

  • Last visited

Everything posted by Starlet__SR

  1. Halfords do a vibe slick 12 in sub with 4 channel amp and genuine wiring kit for £150, and there's alpine units for around £100 Damien
  2. Remove the ABS, become a proper driver lol:) Damien
  3. The SR also came with the front fog switch as standard from what I know, its only a rocker switch. Damien
  4. Will do when I go home for the weekend:) Damien
  5. 78.1hp my mistake, ask Liam_D or keirz or any others that went to the dyno day at monster motorsport Damien
  6. Fuel filter? Pump? Blocked breather? Is there something in the exhaust that is restricting flow?? Damien
  7. Think people need to work out the difference between text talk and abbreviations:P isn't it bruv! l8rs Damien
  8. Unbolt the top two bolts for the hub carrier, undo the 2 bolts and nut on the bottom arm, move out of the way, your choice whether or not to unbolt the caliper, disc etc, but does help, leaving you with the c.v. joint and the driveshaft at your disposal, saves removing the shaft etc:) Damien
  9. Mine was at the wheels Damien
  10. Thats a good price, just make sure you get the right c.v joint kit, the non abs and abs are two totally different seals. Damien
  11. The power output is disappointing, my sr made 78bhp with just a cone filter. Or did you do a typo? Damien
  12. What you've just described Rob is a total waste of time, there's no need at all to remove the whole shaft, it's pointless and a waste of time, plus you'll lose gearbox oil, get someone to hold the shaft, a quick blow is all it takes, if you can't do that then let a garage do the work. Damien
  13. Have a look around the local car park, see if you can spot the said cars? Damien
  14. The service provider can't block numbers, they'll merely offer to give your friend a new number, i'd do that, then get the number, post it anywhere you can, make small ads up offering something uber cool for silly money, public toilets, random walls etc, or find out who the number is provided by, get in contact, explain the situation, see what they can do? Damien
  15. £600 takes it, wheels, tyres, the lot, you can even have the strut brace and pillar pod with it, could do with the money as i've been offered a family friends R6 for silly money lol, so needs must:D Damien
  16. Just get a copper hammer, quick sharp blows to the back of the joint, as for fitting, fit the hub nut, and still use the copper hammer. Gentley tap it on. Damien
  17. Try tweaking your idle. Even if its a few degrees, it will make a whole load of a difference. Damien
  18. One thing these guys forgot, check the centre bore of the wheel, if it's smaller than 54mm, they won't fit unless you bore the hole out, aftermarket wheels tend to have a removable spigot ring, but standard wheels don't, so check beforehand!! The Starlet hub diameter is 54mm, I got the 56mm from my corsa as I attempted to fit the speedlines to the corsa, but to no avail will not fit without modification, you can get the spigot ring kits from halfords, they can become very unstable with just 4 bolts holding it to centre. So if the centre bore is bigger than the Starlet size be sure to buy the
  19. Pretty sure it's an M6 grub screw, you should be able to use a normal m6 bolt with a nut to lock it off. Damien
  20. Ste, i'm with churchill, 18, 1 accident, £1500 fully comp Damien
  21. They were already removed weren't they? They messed alot of people about, not only that, they're playing with money that is not their's, regardless of how snowed under they are, they shouldn't have let things get as bad as this. They've brought it upon themselves, it's only them who can dig themselves out of the hole. Damien
  22. Buy mine!!!! Atleast you know its been well looked after! I'll even give you a hand repairing it seeing as you don't live too far away, looking at getting some parts tomorrow anyway, don't fancy breaking the car, but there's alot of stuff, the tyres were £200 only a few weeks ago!, new rear wheel bearings about a fortnight ago, if you want more pics of the damage, let me know and i'll go remove the damaged panels. Damien
  23. You're welcome to make an offer on mine lol thanks for the bump Gal:P Damien
×
×
  • Create New...