fiddlersport

have the jack and tool pm me

Just waiting for my new mani to arrive, then will be removing mine, both in good condition

its shieldid all the way to the ecu

I have a set of gt seats fitted to ep91, didnt have to bully the feet, just a simple cut off the foot and a large washer to clamp the seat down in the original bolt position , seat rails did not bend and seat comes back and forth in position with out a issue

get us a picture up !!

nice gauge, saves the headache of having too many gauges in the dash, if it a bit cheaper would consider it ! good job on the build

build looking good so far, you going to clean the engine bay while the engine is out ?

there are two types of oil pumps, did you get the right one ? do a search on different 4efte oil pumps ! something to do with the oil seal groove........ a pic of your block where the oil pump goes and a pic of the oil pump you have will help alot

pretty sure the discs are the same, most members remove the abs and didnt mention nothing about disc change, fire a pm at one of the traders, they should be able to give accurate information !

check the uv joint !

thanks for the advice, did a evo cam cover recently and removed the baffle, cleaned it out, then re-tapped, loctite, job done

pmd

£20-25 these go for. GLWS FREE BUMP

pmd

usually when starting a engine after along time simply pull the king lead off so no spark and remove the fuel relay so no fuel going in, spark plugs in or out shouldnt make too much difference except there will be no compressiona and engine will spin faster. open your oil cap and turn over engine and see if the oil splutters out of the cap ! hope that helps ! biggest worry after building engine and shit starts to go wrong but its a simple fix or human error, as long as no major damage done you should be fine

why not iddy ?

want to have a few bits (rocker cover, inlet manifold, etc... powder coated soon name me some powder coaters in the north west guys ??

nice work dude, any more plans for it or is it break time ?

pmd-shifter, wing braces

bump-vanity tray anyone ?

thermostat probably sticking

pmd

pmd

Good luck with sale ! very handy item these are !

just stripped ep82 today and removed the the brake lines, all nice and clean (non abs) also have bumper support bar