Idrees

Stunning!!

It's 'done to death' because it looks awesome. TD04s have been done to death even more, again because they're awesome! Even if it is popular on the forum, it's still a small minority of GTs that have been kitted whether it's Tom's or Livesports! Get a set of Rota Grid Drifts on there, fit the kit you like and show people how it's done. I've never seen a GT with a kit and some nice stance in the UK before.

Hi guys, If a few members were interested in buying new Rota alloys I could offer a decent discount on them. This is for any wheel that they offer, in any size. You can view the range here: Click Prices 15 x 6.5" - RRP £480, GB price = £439.99 15 x 7" - RRP £510, GB price = £469.99 15 x 8" - RRP £530, GB price = £482.99 15 x 9" - RRP £720, GB price £534.99 16 x 7" - RRP £530, GB price = £482.99 16 x 8" - RRP £600, GB price = £534.99 Collection welcome or plus £17.50 UK delivery. Please note: You will not ever get these prices elsewhere! This is an absolute one off and ID-Workz will never

You definitely need a panhard rod on a lowered Starlet. I've had a fair share (to say the least) of Starlets, wheels and suspension setups and that's from my experience. You can see with your naked eye how the wheels go out of alignment once the car is lower and as mentioned above one side wheel will scrape.

5.4k kg rings a bell but I cant remenber what wheel that is, I'll confirm later

Harry I had a similar one to yours but mine was a 197 not a 200 (model before yours), handled brilliant but I didn't like anything else about it!

Get a NA EP91 ;)

Hi guys, I have put together a fantastic offer on forged engine internals for both the 4E and 5E engines. Package includes: Wossner forged pistons PEC forged conrods Athena 1.2 or 1.4mm MLS headgasket (1.9mm available at £35 extra) 4E/5E price: £950 inc UK delivery ARP headbolt kits are £129 delivered. We can supply OEM Toyota headbolts, engine gasket sets, and oil pumps (and everything else required for a rebuild). PM me if you require those too. Regards Idrees ID-Workz

I can have them painted

Happy days then!

Hi guys, We are now able to supply forged internals, steel headgaskets, ARP bolts, bearings are more. Please PM or email us at sales@id-workz.co.uk with whatever you require and we will send you a quote asap. Kind regards Idrees Shafique ID-Workz.co.uk

That'd be awesome

Good man Russ ;) The bumper is supplied in bare plastic

Cheers. She's going to be featured in Banzai too (next month)

There be customs charges from Speed Vision too though

I wouldn't even waste my time or fuel.

The boy speaks the truth. They look like any old wheel from far back in black. Silver all the way, or a light grey.

Asda and Tesco didn't have it, Tesco claimed they had three and they all sold quick! I bought mine from Sainsburys, also available at WHSmith.

Blimey, I can imagine!

Awesome updates. Did you buy a brand new driveshaft from Toyota?

Cheers Liam! The feature has come out pretty well apart from a couple of small mistake so please excuse them! Firstly I'm not at college, I'm a full time Uni student! Also the car doesn't have Wiseco pistons or a Cusco LSD, both those parts have been removed but I must have made some mistake on the spec list I sent to them.

Grant yours looks a lot easier than mine too. Josh the inner side of mine was 10mm but thats because I used AN8 fittings. When looking at mine it also looked impossible but you'll get there by squeezing it

Get some insulation tape and wrap it around VERY tight, that'll help.

It took me over 30 minutes to do each one. Screw the cap off, and get the hose end in there. Then fasten that back on to the fitting, it'll be tight but it will go on.

Awesome work as always mate!