JDMfreak

good glanza v carbon bonnet worth around €250 to €300 has it got the washer jet holes or none at all any of the underside frame pulling away

thanks matt I was looking at them for ages was gonna get them in complete white but got offered these as a swap for mine and knew they would suit it

cheers rich shame about the backs rubbing though but should be sorted with new springs and shocks fronts are perfect mot a budge outta them

cheers colin...yeah these yellow ones are fairly rattley haha but surprising enough there not bad

another little update to ad swapped my volk ray replica wheels last night for some dished items as far as I know there str wheels I'll find out there proper name today there like new they have a bit of a wide offset so im not sure about if there gonna rub but im betting they will but im planning on raising the car up off the 40mm springs and fitting some trd springs which afaik only drop the car 15mm or 20mm anyways sorry for the crap pics but ya get the idea also one I had the front wheels off found out ive trd front shocks in it not bilstien ones as I was told now I know why its

this fcd was fitted to my car and car had no starting problems glanza dude I didnt have any supporting mods bar a decat and hks actuator I removed it as I plan on going for an ecu soon my car was running stock boost a stock manifold

sorry chris for the life of me couldn't think of your name haha... my mounts were 10 times worse and weren't allowing any rubbing or anything I say something is slightly out of place and causing it

welcome along

this is starting to turn into a great little project Rory what's next on the cards for it remove bump strips and some lows

if ya could and let me know

God I could do with them shocks and springs postage would cost a fortune

Wheel wobble something's a bit bent then ill try find that pic the member put up never seen one bend there

ive barrel and one foot well light if its any use had to hard wire it in as it didn't have the right plugs for a glanza has timer box though

sure driveshaft hasn't a kink in it measure the front of wheel basically tyre face to bumper and do the same at the back to the side skirt then do same on far side someone on here posted a pic the hub where it bolts to shock was bent causing wheel to be pushed back

hmm this might look well on my car needing any bits for yours lad im only in gorey pm best cash price

I was going to see about a shop special ecu come by them sometimes similar to a blitz access ecu but slightly cheaper.. haha im gonna stick the standard steering wheel back on anyways big gap around the column and im not a fan of the aftermarket one tbh

haha no previous owner wired horn upto it bit ignorant and bright haha,, may start saving for a plug and play ecu €500 over here for one

Yeah 5 min job swapping hinges makes a great difference door close so easy...yeah got the glow barrel and footwell light fitted tapped into door switch and a ignition power

We were going to swap the abs ecu for mine as my abs ecu is working we have a abs pump but I don't think pump is gone

right a friend asked to post this up his glanza v has an abs fault and its always on we did the abs diagnostics and came up with code 32 Left front wheel sensor signal malfunction. We replaced the sensor and reset it but light still solid on now one thing I did notice the abs pump doesn't make the hum sound mine does when light goes off am I right in thinking his abs pump is wanked we have another one here to try on it can I just plug it in a check it with out all the pipes connected

Same as this

I've a blitz bov I'm going to sell has proper adjusting screw and trumpet if anyone's interested

if its got a hinge ya might be able to swap it over

have a look on ebay I got a set the other day and there fairly bright white light up hole back of car i'll see can I find the link

suppose good setup there only ever had a ct9 on any of my glanza's haha.. I didn't think they would be as reliable with big power just goes to show the right setup and they can be