JDMfreak

cheers dan all I know was ecu said 4efe and was ecased in the little black housing all ep80 ep82 ecu's are in that how I knew its wasn't a glanza one I actually have a set of them bumpers for the car but need painting and need to get grill and headlights as there different if I could get the poxy fan to stop going the minute I put the key in id be delighted need heaters in this weather and fan going flat out doesn't help

right update on this ive checked the ac switch located down beside battery this one im getting no ohm readings well I don't know what to set it at tbh I tried all the ohms settings I have ac relay in aswell and both ac fan relays in small box in front of fuse box in aswell I did try a power tester bulb only one of the 4 pins in ac switch shows a live im still stumped to why the fan is going only way it stops is if I remove 2nd from bottom 20amp fuse in engine bay fuse box or the relay for fan in fuse box any other help would be much appreciated

cheers colin need to get some really good pics of it in the day got the new number plates on it today have to sort a tyre out for the glanza so I can put the other wheel on the front then nct time car hasn't been tested since May 10 2009 that's when the nct expired and was due in may 2015 this year so may get her booked in and see how she goes

great little project ive just done a soleil engine and loom conversion on a 2e-e starlet I spotted your exhaust I was going to this but found a soleil exhaust by luck keep up the good work not many gi starlets or soleil ones left

right update time got a heap of stuff done at the car bump strips are on and painted need to get more double side tape as stuff I had wasn't great both bumpers from the blue donor car have been flattened and painted satin black along with grill and mirrors got a set of gt front seats full car got a serious wash that it needed and t-cut and polished to bring paint back up again shiny there's a few marks around it from it been moved around yard also swapped wheels from my glanza onto it as I picked up a another set for that still need to get windscreen seal fitted and a set of number plates made

Check cam seals

I have back bumper and front bumper in black front bumper is cut for front mount intercooler

spoiler is the job lad

sorted this can be locked thanks

as above looking for two gt starlet seats or bucket seats in Ireland need them asap cash waiting for them no mental prices please same as pic below for gt seats or will take any bucket seats

there wasn't much wiring to be messing with everything plugged together the loom and dash loom were from same car I just swapped it from one car to mine its something very simple as relay is clicking open the minute I put it near the pins in fuse box

I dont have a multimeter i may get one i ve a fuuny feeling its to do with relay or something as the minute you even tip of the relay in fusebox it comes on a Im gonna check all the earths again The loom and dash came from a soleil Starlet so its not chopped or spliced in anywhere

few more pics to ad to the thread its moving under it own power now need to paint its new bumpers I took of the donor car also today swapped the lowering springs into it so much better to drive now still hunting for 2 front seats and a few other little bits anyways a few pics of it as it sits now, drove it for first time today actually very surprised how quick and well it goes more updates to come

as above since I converted the starlet from a 2ee 12v injection to 4efe 16v the fan has been on constant ive basically swapped the entire looms dash and engine bay the car is running a1 and everything is working as it it should I did have to swap ecu out for a 4efe one as far as im aware its for a soleil as it has the little black casing around it things ive checked so far new fan switch in thermostat housing still on bridged the air con switch located behind passenger headlight also even tried a proper air con switch and still running only thing that stop it is if I remo

sorted got the car running a wire had been joined and wasn't making a good connection made a new connection car fired up grand

right not as promised with heaps of pics but a pic or two of her nearly there have niggly stuff to sort out interior seats cards all that stuff exhaust is now sorted managed to find a soleil starlet exhaust thank god need to fit a new lambda sensor as it was snapped and need to make a back box up for it have its own one but someone cut the flange off back box anyways some of here latest pics excuse the vw steels only temporary till I get new wheels and the lowering springs into it I may get some decent pictures of it

is yours 12v efi sam the 2ee engine I have that loom here that's been modified to run on the 12v dash loom and 4efte engine side of things I was trying to make it run on a 4efe which it wasn't going to ever work as it needs a 4efte ecu to run properly and map sensor I tried a 4efe ecu and it wouldn't run so basically you leave 12v dash in car remove engine bay wiring loom through passenger side under wiper motor and the wiring that come in near gear linkages and replace it with the modified loom fit the 4efte ecu and 4efte engine in its place or if ya really want fit the 4efe engine

i'll try that when I pick car up stu that's a handy tip to remember I will let ya know whether it works or not and report back ive payed for it but as its not running I cant drive it and getting a way to collect it is impossible as I don't have a tow bar or any mates willing to tow it @colin I watched that video a few times I need to actually copy it as im working on car

Mate of mine has clocks mirrors and a gew other bits for an ep70

Right time for an update on this i originally fitted a loom that was made up basically a 4efte ep82 loom spliced into a 12v 2ee dash loom i fitted the 4efe i built for it but when i started it i realised i had some problems the loom was built to run a 4efte so had to use a 4efte ecu but when i first started it it was definetley over fueling. So as I was running into a few issues i decided to do the clever thing and pull the loom back out not a big job had it out in 20 mins. A mate told me he had a soleil dash loom and engine loom which would work so pulled dash out with the 12v loom attached

What size tyres you running when i had 16s my hlnza pulled all over road switched to 14s alot better but bushes had to be replaced as wide wheels destroyed them

Sorted wiper motor was goosed was getting power but was seized up

Well i cant get any spark and ive changed distributor.. a mate suggested theres a wire broke somewhere in the loom running from ecu to distributor but i dont wanna get into changing looms and stuff just get ot to run then im taking engine out as its sold of it ok The distrbutor is the same as a normal setup same as this one

all the gearboxes have different ratios so there not all the same ive had a 1.0 box in a glanza v and a 1.3 non turbo box in a glanza v both are no good as there ratios are to short the glanza box is better suited to the glanza v box the closest I would call is a cynos gear box ratios are slightly longer only a fraction but is the best box for a swap onto a turbo engine if you really wanted to push it you could fit a 1.3 6 speed box from a corolla g6 ive seen a glanza turbo running one of these and for long journeys seems to suit them well even at top end the box is screaming and the revs

fit the same but 98 spec have different looms that allow very bottom lights to be side light but will work no problem with looms you have