JDMfreak

yes it is a starlet S its just the line up it was in and classed as an S is there any extras rev counter electric windows electric mirrors anything like that info from Wikipedia "Initially the UK models were the base 1.3 Sportif and the upmarket 1.3 CD (with standard CD Player and Sunroof). In 1998, the UK line up was revised with base 1.3 S, sporty 1.3 SR (with lowered suspension, spoiler, and sport exhaust), and loaded 1.3 GLS." I'm sure there loads of people on here with stuff you would be after as for the exhaust there's a TTE exhaust or TRD exhaust that fits straight onto the N/A exha

fucking hell both top end and bottom knocking like a whores knees

what happened hope it's not serious

that pic I robbed off the net heres another one

they can be got from ebay usually when you order your harnesses they ask which car there for and supply these you just need to find out the thread size of the two rear seat bolts and the one inside the door for the seat belt near the floor in the first picture. You can leave your existing seat belts in place along with seat belt clip on side on seat for an mot and just unclip the harnesses from the eye hooks

use the fixings from the original seat belts there's a fixing inside where the belt is able to slide forward and back on a bar get a new bolt that has an eye and replace this. For the harness that go over the seat you can either attach that to the seat bolts at the back but will need two more eye hole bolts this will keep the harnesse's tidy and close to the seat This one you can see the way its done on the drivers side And these are the bolts I'm talking about I don't know there exact name

think that my best bet stick another secondhand wishbone in I had a look on toyodiy but there is no more diagrams on the site and Toyota asked them to take down the diagrams of all the parts why I haven't a clue but after making the site useless now should have eft the diagrams was handy for reference

I've priced the polybush kits and there quite dear and I only need one bush for the minute later on I will replace all the bushes when funds allow

I went and had a look on toyodiy. But they have removed the images so I cant see what bush is what part number so has anyone the part numbers for the bushes for the wishbones I need the front bush one thanks

that doesn't look good looks like the chassis channels are bent I think you may go find another shell don't think that going to pass an mot even if you jack it back up into place

another little update to ad to the thread picked up a set of doors yesterday haven't had a chance to fit them yet Also while on my travels manged to pick up a mk1 Gt headlight have sourced a pair so will keep this as a spare yes that is the door on my kitchen worktop seeing as today was a good sunny day got round to swapping doors was half expecting to have to pull of wings instead went and undone the doors from the other side of the hinge left the hinges on the car and refitted the doors along with all the windy windows and door cards have to say im delighted also have an

mine sat on cusco coilovers on 16s not fully wound down

sold lock it up

these are called shop special ecu's the go by othe names aswell there built and modded by little tuning shops in japan there basically cheaper than jam/blitz/sard analyse and other brands from the outside they look identical to a stock ecu and some have seals and some have small stickers on them so be wary when you spot them with odd stickers there not stock ecu's inside of a stock 4efte ep91 ecu inside of a modded ecu as you can see the extra board that's been fitted what your ecu might be as the sticker seals look similar size on either side

well some progress today got the skirts fitted don't mind the tools aall over the place my tools are limited and crap haha well heres the pictures sorry about the quality as the camera is crap on my nokia

cheers darragh at some stage I will give a proper respray the whole car

Time for an update lots has happened still have lots to do i'll let the photo's do the talking picked up a gt kit bumpers/mouldings/boot lid am still waiting to collect bonnet and headlight but can get these at some stage paint was bit tired looking so I picked up a rattle can of 205 black and a can of laquer and started tidying bits of the kit up anyways a few pictures will keep ya's updated as I go not a bad reflection to say I painted it with a rattle can bottom panel not painted top factory painted and last but not least bootlid and bumper the rear bumper will need pai

looks good the way it is and also welcome to UKSO

looks tidy mate whats the plans for it I also loaded the pics up for you.

clear indicators paint the inside of the indcators silver or chrome matches well with headlights

Ah right I was wondering how you got the electric windows,, I'm doing a similar conversion well the GT part im sticking with the trusty 1.3 12v efi for the minute

sorry sold there this evening meant to edit this as sold im after a gt bonnet and headlamps

where about's in Ireland are you