Jordk

As you can see in the pic below there is a water way in the inlet of the cylinder head that is leaking. The gasket only covers a bit of it so when the manifold is bolted up it doesn't sit true. Anyone ever had this issue? Any ideas on how to resolve it? (The squarish hole with water leaking out)

Am I right in thinking a 82 cage fits in a 91?

Seen this car at crail a few times. Nice motor! Glwts.

Still for sale?

Mine should be done in the next couple of months too. Otherwise can appear in the rav 4! haha

Would you sell the 4efte as a whole? (for repairs) Also do you have the loom?

Might have if you're still needing mate. Will check for you.

Get your intercooler pipework sorted mate. It's pretty shocking from what I seen! Will make a huge difference not having the silicone sitting on the exhaust mani!

Rav 4 is what I've been recommended by rbz. I'm actually an engineer by trade but I'm looking for something a bit more 'oem look'. I did have a universal cable fitted but would rather something that's a better fit.

What throttle cable is best fit for a Zisco inlet mani? The stock one is about 1-2" too short.

Best price delivered for the wheels and TRD Shifter?

Was that the hard line cut at the fuel tank end then adapt it there?

So if I was to increase the size of the return line for safest/optimum results? Wouldn't this require me running an an6 line all the way back to the tank? Any other methods you might recommend?

Not sure what to think tbh cant see why it's not worth a shot!

Yeah dude that's the exact site I've been looking at, as going to get a aeromotive fpr too. The return line should be around 6.4mm and the AN6 hose measures around 8mm thus is theory the return would create a choke point/pressure area which could cause a few issues. Or so I'd think?

I'm looking into getting fittings and hose for my Zisco fuel rail. I already have the supplied hose and fitting from Rail-Filter. I'm now left with an AN10 hole in the rail. Obviously it'll need to be reduced to whatever size to then be taken from the FPR and then to the return. I was looking at changing all the hoses to braided ones but that leaves me with the return hose (hard pipe) what's best to do with that?

I'm having a similar issue but think it will require changing the whole set up. The rail is AN10 but you'd need to reduce it to an6 i'd think.

The silicone section to the sump but all sorted now! I think that's the right sensor mate. Can't remember what it looks like I removed it ages ago and misplaced it :/ Did that come out of the inlet mani?

How much posted?

Wanted. Inlet manifold temp sensor Rear light loom sections. (both drivers and passenger) Turbo oil return pipe (silicone preferred to fit GT28) Money waiting

About time I updated this as there's been ALOT of work done! Well after having the car completely stripped I cleaned all the interior etc. The dash board and other trim was sent away to get flocked and came back looking rather tasty Wasn't long until the whole lot was fitted Also acquired a lovely Bride seat from Idrees and this was given a good clean and I stitched up a few burst seams and sits all pretty in the drivers side. (better pics are needed!) Also had a friend re trim the door cards After considering wether or not to go for braces or a cage my wallet deci

Cheers guys I'll give Dean a shout!

Recently got myself a race-tech GT28 turbo kit (second hand). I have no intercooler pipework and dont want to bodge tonnes of lengths of pipe and joiners. Want something relatively neat looking. I cant think of any way other than taking the car somewhere to have it all custom made. Will need to get everything from scratch (core,pipes etc) Anyone had experience making they're own or know of any kits that may only need very slight modification?

No rail I presume?

Rear light looms and foot rest near pedal assembly?