Jump to content

5e colin

Club Member
 View Profile  See their activity

  • Content Count

    6604

  • Joined

  • Last visited

 Content Type 

Everything posted by 5e colin

  1. 5e colin
    you going machiening that your selve ??? you must have some fancy tools in the little shed :)
  2. 5e colin
    is the honda 3 pin ??? and is it the same type ?? wa car / engine did it come off ??? i prefer keeping the electro from starlet the honda 1 might not be compatible and give al sorts of isseu
  3. 5e colin
    believe it or not my budget coilovers from the polo are a softer ride and are more stable tru the corners and absorbes bumps way smoother the shocks and springs i had was like metal stilts !!!! bumping al over let me know how you find them d2 they can be got new for 700euros ere in europe
  4. 5e colin
    did you try yet to slide the starlet tps over the shaft ??? if it fits wel then its just a case of tapping a hole to bolt it down then a adaptor will be needed i think for between the starlet mani and new tb so probly be at an angle
  5. 5e colin
    this is 1 and my boot is empty with no spare wheel in it and parcel 14" wheels
  6. 5e colin
    ^^^^ welcome to the site mate :)
  7. 5e colin
    did it go to denmark ???
  8. 5e colin
    holy mo i never knew the blades started glowing thats 1 cool pic
  9. 5e colin
    it is an pain ha ha i tapped in on where the injector 4 plug joins in the loom i soldered it together with a heatwap/shrink over it then taped the whole lenght of the cable to the knock sensor i used almost 2 rolls of black electro tape
  10. 5e colin
    trace it for a crack in the wire and tape it up really wel an not rubbing of anything thats where i would start cant be anything else really i got code 12 and 52 when i bought mine and the cable wasnt there and no sensor so i traced back the wire and instaled a thick shielded wire and taped it up well and have a spade connector pushed in the sensor it cleared both codes and hassent come back for almost 3 years now
  11. 5e colin
    i spend most of my time driving coming down some very long steep hills and had them fade before from the heat so bigger discs are on order thats on stock levin pads !!! @ kbond will do mate
  12. 5e colin
    bumpski to the topske
  13. 5e colin
    its the st202 cariers that they use on levin twin pots to come up to 277 but then again not al 202 cariers are the same size i was told
  14. 5e colin
    stock are crap and even twins with 260 discs are crap in my eyes disks are to small to get rid of the heat quick expecially coming down mountain roads kbond this is what you need making :) wont be long now before i have my metal set from lumax engineering
  15. 5e colin
    best price on those bushes only dont need mounts
  16. 5e colin
    ha ok thanks just asking becouse i have to refit mine on 1 of my covers after the an10 fittings where welded on
  17. 5e colin
    ^^^ cant pop rivets be used
  18. 5e colin

    HOSE KIT!!

    5e colin replied to J40k-mo's topic in Engines

    there floating around on egay in those noodel places
  19. 5e colin
    coilovers any day over shocks thats my preference
  20. 5e colin
    about time a bus got rammed ha ha did u even notice it ????
  21. 5e colin

    Cold high revving

    5e colin replied to Andy32's topic in Engines

    that sounds ok ish timing whise to me on a stone cold engine check if your thermostat aint stuck open !!!
  22. 5e colin

    Cold high revving

    5e colin replied to Andy32's topic in Engines

    rufly how long mate
  23. 5e colin
    havent a clue mate i didnt see anything on them will give them a clean later on and recheck
  24. 5e colin

    Cold high revving

    5e colin replied to Andy32's topic in Engines

    its normal mate around 1800rpm when cold and slowly lowers rpm as the engine warms up nothing to worry abouth
  25. 5e colin
    bumpski ttt
×
×
  • Create New...