Jump to content

5e colin

Club Member
 View Profile  See their activity

  • Posts

    6604

  • Joined

  • Last visited

 Content Type 

Everything posted by 5e colin

  1. 5e colin
    there is 2 !! 1 big 1 for ecu and 1 small 1 for gauge if its over heating it probly has blown headgasket or the fan not kicking in / if fan not kicking in then its the sensor on the thermostat housing together with the ecy/gauge temp senser there al on there
  2. 5e colin
    use the starlet rail brackets and bolt on side to side bars then bolt the rails from new seats to the cross bars like i did with my alfa interior
  3. 5e colin
    hey james where did you buy the arc topmount ??? i need somthing like that model to
  4. 5e colin
    not for a while yet those boxes are sooooooooooooooooooo overpriced 600/800 pounds pfffff see ya i inspected my oem lsd box ( c155 , 4.3fd )im going to mes with its 0.725 gear :) ( 5th ) and see if i cant change the final drive over from 4efte box 3.7
  5. 5e colin
    get rid of those standerd chocks and springs mate no wonder ha ha also get your full geometry checked will bet its out
  6. 5e colin
    bump ttt
  7. 5e colin
    our stock piston and rods are pres fitted on the rods and floating on the piston phill stupid mistake from toyo :) ha ha
  8. 5e colin
    same ere good seller and fast delivery wel wrapped to wil buy of philm again
  9. 5e colin
    set of v rods ere if needed pat
  10. 5e colin

    Td04

    5e colin replied to Manny01's topic in Wanted

    have a very fresh vf10 strait bolt on penny welded up for external waste gate have oil line to
  11. 5e colin
    bump
  12. 5e colin
    bumpski
  13. 5e colin
    it would be a r5 turbo the original 1 rwd http://photo-voiture.motorlegend.com/les-trente-ans-de-la-r5-turbo/photo-r5-turbo-super-production/16439,63719.html
  14. 5e colin

    Td04 kit

    5e colin replied to Manny01's topic in Wanted

    i have a very good vf10 here welded up penny for externall gate and have oil line to
  15. 5e colin
    stick to nr7 then mate 9 will just foul the plugs and give cold start isseus
  16. 5e colin
    ya thats where your confused mate ep82 turbo rods and gen 1 4efe rods are identical in size glanza v rods and gen2 4efe rods are also identical in size there is no real way of telling them appart only from gen1 to gen2 thats easy fat v skinn p9 even in the p9 na and turbo i cant see any diferences is size measured both for hours
  17. 5e colin
    another fuckhead in a car !!!!!!!!! some real spastics out there that just dont give a fuck how they ever got there licenses in the first place is beyond me i hope the car driver served his/her 5 year jail term speeding or not this is NOT the bikers fault attal
  18. 5e colin
    no there just to cold 7 is more then enough ngk bkr7e hybrid ct9 ot tdo4 ??
  19. 5e colin
    i would do pumps etc etc to now your doing a ground up rebuild phil dont skimp out now its about 20e for each bearing half in toyota
  20. 5e colin
    the limiter should be raised indeed for a p&p dont sound good to me and as shaun says they should have a 2nd board inside
  21. 5e colin
    press / no clips in ours sadly
  22. 5e colin
    where on the rod ???? are you confusing a gen 1 to 2 rod maybie
  23. 5e colin
    be sure the piston is level and supported propper or it could crack bets to get it done by some1 that dont it before
  24. 5e colin
    like where ??? i have them ere and look the same to me ?????
  25. 5e colin
    smoke is the seal our ct9 suffer from that hard shite little turbos they are indeed
×
×
  • Create New...