Sparky Posted March 29, 2011 Author Share Posted March 29, 2011 Clear reverse scoop is on the way Also ordered a nipple take off for the compressor housing and paid for my wideband shipping today, hope it turns up soon!Should have the front end all back together by the end of this weekend I am hoping need to crack on with the interior next Quote Link to post Share on other sites
Sparky Posted March 29, 2011 Author Share Posted March 29, 2011 Oh almost forget should have some 460cc injectors soon too Quote Link to post Share on other sites
mrkd5916 Posted March 29, 2011 Share Posted March 29, 2011 just seen the brake lines dude! they look very good have you had chance to try them with your wilwoods yet? Quote Link to post Share on other sites
Dan507 Posted March 29, 2011 Share Posted March 29, 2011 Looks soo sexual! Quote Link to post Share on other sites
Sparky Posted March 29, 2011 Author Share Posted March 29, 2011 Nah mate tried bleeding them but couldnt get much of a pedal feel when we get it running hopefully we will bleed it with the engine running see if it makes a difference. Quote Link to post Share on other sites
Sanchez Posted March 29, 2011 Share Posted March 29, 2011 Awesome mate, woooh those calipers are close aint they?! haha Quote Link to post Share on other sites
Sparky Posted March 29, 2011 Author Share Posted March 29, 2011 Cheers Dan I would say it looks like a bag of shite atm though And Yea its close Sanch mate they turn they thank fuck Quote Link to post Share on other sites
mrkd5916 Posted March 29, 2011 Share Posted March 29, 2011 Nah mate tried bleeding them but couldnt get much of a pedal feel when we get it running hopefully we will bleed it with the engine running see if it makes a difference.yeah i think you might have to let the car run then bleed them fella, cant remember if i had to run mine or not Quote Link to post Share on other sites
Steve GT Posted March 30, 2011 Share Posted March 30, 2011 nice work lewyou have to get this running before mine is again, thats a challengep.s dont rush and CHECH YOUR CRANK SEALS trust me Quote Link to post Share on other sites
ro55ifumi Posted March 30, 2011 Share Posted March 30, 2011 Looking good Lew Quote Link to post Share on other sites
Sparky Posted March 30, 2011 Author Share Posted March 30, 2011 My bottom end is fresh as a daisy mate After seeing what happened to yours I am so happy I made the choice and go for the full rebuild and hopefully its gonna last More updates on the weekend. Quote Link to post Share on other sites
Sparky Posted April 1, 2011 Author Share Posted April 1, 2011 Reverse scoop is here, vacuum nipple for the TD04 inlet side is here and 460cc injectors paid for My wideband has been delayed though and wont leave Prosport to go to the supplier until the 11th and it has to come from the US then Hopefully it will be back in time for mapping. Quote Link to post Share on other sites
Steve GT Posted April 1, 2011 Share Posted April 1, 2011 normal reverse scoop or clear? Quote Link to post Share on other sites
Raffi Posted April 1, 2011 Share Posted April 1, 2011 Nice progress, but we need more pics Quote Link to post Share on other sites
Raz Posted April 1, 2011 Share Posted April 1, 2011 As you allways say sparky. "Pics of GTFO" lol..Cars coming allong very nicely i am jealous!! Quote Link to post Share on other sites
nazzurro19 Posted April 1, 2011 Share Posted April 1, 2011 did you order from prosport.com or rspec.co.uk im guna get mine from rspec all genuine really good site they sell all prosports stuff , boost controllers , adapters plates the full works what wideband u go forim strugling to find nice priced defis so i think im guna go bk to 52mm prosport premium peak/warning gauges Quote Link to post Share on other sites
Sparky Posted April 1, 2011 Author Share Posted April 1, 2011 Cheers guys its a clear reverse scoop Steve, why? Because Im a whore I got my prosport wideband from a place in the US, modern autmotive performance, mainly because it cost me less than £150 delivered where as RSpec want £180 without delivery! Oh and there is a pic of it a page back Trying to get some brackets and stuff today to get my intercooler and oil cooler mounted! Prooving to be a bit more difficult than before as I want something thats going to last this time!Pics over the weekend guys dont worry Quote Link to post Share on other sites
Sparky Posted April 2, 2011 Author Share Posted April 2, 2011 Its your lucky day, some pictures a day early Today was a long day! Finally got the oil cooler plumbed up and the intercooler mounted, well pretty much mounted getting some more bolts for side mounts, also started ripping the interior out ready to change the dash loom.Anyways,Oil cooler in place just need the correct length nuts and boltsThermostat in placeBit of modification for the remote filter housingFilter housing in placeStarting to pipe it up Mocking up the intercoolerAnd bolted in placeDont think the intercooler is going anywhere And the interior as far as we gotMay not get anymore work done this weekend now unless there is a place open where I can get assorted nuts and bolts to get everything fitted tidy, so Monday I will probably come down and crack on with it. Pretty happy with how far we got considering all the potching around we had to do!!!Wont make the South Wales meet next weekend though JapFest is more important so not going to stop until its ready!! Quote Link to post Share on other sites
nazzurro19 Posted April 2, 2011 Share Posted April 2, 2011 dude try maplins we do loads of boxes of diff sized bolts circluos loads of good stuff £2.99 a box Quote Link to post Share on other sites
ryan lang Posted April 2, 2011 Share Posted April 2, 2011 its the weekend after next though dude ill bring the loom up when i bring jade home in the morning.good progress today though bud Quote Link to post Share on other sites
LukeSR Posted April 2, 2011 Share Posted April 2, 2011 Grear work, coming along now Quote Link to post Share on other sites
Ryan-11 Posted April 2, 2011 Share Posted April 2, 2011 good stuff sparks. its gettin there Quote Link to post Share on other sites
Raffi Posted April 2, 2011 Share Posted April 2, 2011 Nice progress, looking good Quote Link to post Share on other sites
Sparky Posted April 2, 2011 Author Share Posted April 2, 2011 Will try maplin then Naz thanks Cheers Ry that will be good be needing it soon.Thanks everyone else its slowly getting there but hopefully making sure everything is done right will pay off in the end! Quote Link to post Share on other sites
ro55ifumi Posted April 3, 2011 Share Posted April 3, 2011 Awesome lew an one hell of a bracket for the intercooler really looking forawrd to seeing this completeJohn Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.