Starlet Nath Posted January 28, 2009 Author Share Posted January 28, 2009 Not much of an update tonightI have removed the dash loom off the dash as seen in the first picture from last nights pictures, also started to take all the nuts off that hold the heater matrix in place.Tomorrow night I will take out the heater matrix, remove the steering column and that'll be about it for the interior side of the front cut. I'll then take the ARB, hubs and the lower arms off then the last thing to remove will be drain the gearbox and remove the drive shafts and then I'll be ready to remove the engine fom the front cut My offer of help still hasn't arrived yet, in the mean time I'll struggle on on my own (don't worry Phil I know you come round every night if you lived here!!!) Quote Link to post Share on other sites
Nanglebadger Posted January 28, 2009 Share Posted January 28, 2009 damn straight i would buddy and u know it!!!! hell yeah! i told u that years ago!!!glad to hear u got more progress done tonight again mate! nice one!Phil. Quote Link to post Share on other sites
Starlet Nath Posted January 28, 2009 Author Share Posted January 28, 2009 damn straight i would buddy and u know it!!!! hell yeah! i told u that years ago!!!glad to hear u got more progress done tonight again mate! nice one!Phil.Even if it was just a little bit, I still got something done. I'm a step closer to getting the engine out Quote Link to post Share on other sites
Starlet Nath Posted January 29, 2009 Author Share Posted January 29, 2009 Well here's tonights updateI have removed the heater matrixThen I removed the brake and clutch pedalsOnly the steering column and the gearstick to remove and the interior side is finishedStarted to take apart the front hub assembly, but as it hasn't got a damper attached to it I was fighting a losing battle. So I've given up for tonight, I'll fit a spare damper I have in the garage tomorrow and I can get the drive shaft nut off then I'll take the lower arm off Quote Link to post Share on other sites
Nanglebadger Posted January 30, 2009 Share Posted January 30, 2009 progress progress progress!!alex must forget wot u look like your in the garage so much his week! top work!Phil. Quote Link to post Share on other sites
Starlet Nath Posted February 2, 2009 Author Share Posted February 2, 2009 Just a quick update..After speaking to a guy from Competition Supplies at the Autosport International Show in early January I have decided to fit a Tilton Pedal box. Unfortunately the pedal box has only just come out and hasn't reached our shores yet. But I already have my order in and it should be here in early April ready for the shell going for it's cage.Anyway here is the catalogue, the pedal box I'm getting is on pages 2 & 3 Quote Link to post Share on other sites
SiCaln Posted February 2, 2009 Share Posted February 2, 2009 wow theyr very smart man, no expense spared Quote Link to post Share on other sites
Starlet Nath Posted February 2, 2009 Author Share Posted February 2, 2009 wow theyr very smart man, no expense sparedWell it's gottaGo WellHandle WellBut most of all Stop WellSome people might think its a bit extreme, but I think it'll be worth it Quote Link to post Share on other sites
BenV Posted February 2, 2009 Share Posted February 2, 2009 their really smart man Quote Link to post Share on other sites
Starlet Nath Posted February 2, 2009 Author Share Posted February 2, 2009 their really smart manThanks Ben Fancy jumping in on my Carbon fibre Glanza S bonnet group buy? Only need 2 more people and then I can place the order Quote Link to post Share on other sites
BenV Posted February 2, 2009 Share Posted February 2, 2009 dude trust me after buying a set of carbon brows i think a bonnet is a must but i have no jo at the moment so i'd have to wait a while sorry Quote Link to post Share on other sites
Nanglebadger Posted February 2, 2009 Share Posted February 2, 2009 mate, this pedal box is gonna be outstanding!!!!! your doin this GOOD and PROPER!!!! cant wait to see this project continue!Phil. Quote Link to post Share on other sites
Starlet Nath Posted February 5, 2009 Author Share Posted February 5, 2009 Well had about 10 minutes on the front cut tonightRemoved the driveshaft nut on the passenger side, then removed the caliper and bracket.Anybody fancy these Glanza calipers?Got the day off tomorrow so maybe I'll get quite a bit done Quote Link to post Share on other sites
Starlet Nath Posted February 6, 2009 Author Share Posted February 6, 2009 Well had the day off today so done a few bits and pieces on the front cutI finished off stripping the passenger side hubHowever it wasn't straight forward, after spending ages trying to split the driveshaft from the front hub. So I ended up spliting the driveshaft and leaving one end in the gearboxSplit hubs from lower arms and dropped them offThen repeated on the drivers sideAll removed parts Quote Link to post Share on other sites
Nanglebadger Posted February 7, 2009 Share Posted February 7, 2009 nice work bud!Phil. Quote Link to post Share on other sites
Starlet Nath Posted February 7, 2009 Author Share Posted February 7, 2009 nice work bud!Phil.Cheers Philip,Spent my time today tidying up my garage and stripped down my spare doors. Maybe take out the engine from the front cut next weekend Quote Link to post Share on other sites
rob_bower Posted February 16, 2009 Share Posted February 16, 2009 Are we still on for sat nath?? that engine is going to feel our wrath!!!! lol let me know buddy!! Quote Link to post Share on other sites
Starlet Nath Posted February 17, 2009 Author Share Posted February 17, 2009 Are we still on for sat nath?? that engine is going to feel our wrath!!!! lol let me know buddy!!Yes we are still on, we had already agreed this didn't we? Are you coming on your own? Or are you bringing help Nath Quote Link to post Share on other sites
Starlet__SR Posted February 19, 2009 Share Posted February 19, 2009 You don't know what HOK means? NOPE I'm not giving owt away :surrender: Not got anything done today because of the rainTomorrow I'm helping Starletsy take out the dash out of his glanza, so I won't get owt done tomorrow!!!But my next step is to drain and remove the petrol tank.House of Kolor :drunk2: Quote Link to post Share on other sites
Starlet Nath Posted February 19, 2009 Author Share Posted February 19, 2009 House of Kolor :surrender:lolThat's from some time ago!! Not going for House Of Kolor anymore cost too much But anyway its a track car so 205 Satin Black will be fine :drunk2: Quote Link to post Share on other sites
Nanglebadger Posted February 19, 2009 Share Posted February 19, 2009 fine and STEALTHY!!!!!!!!! yeeeeeeeeehaaaaaaaaaaaaaaaaaaaaa!!!Phil. Quote Link to post Share on other sites
Starlet__SR Posted February 19, 2009 Share Posted February 19, 2009 lolThat's from some time ago!! Not going for House Of Kolor anymore cost too much :drunk2: But anyway its a track car so 205 Satin Black will be fine :surrender:Lol, I like House of Kolor. Used alot of their paint, especially the candy, why don't you go for mg trophy blue to be different?Also. You selling any parts????ThanksDamien Quote Link to post Share on other sites
rob_bower Posted February 20, 2009 Share Posted February 20, 2009 that front cut is going to feel our wrath in the morning!!! :surrender: see you bright and early!! Quote Link to post Share on other sites
Starlet Nath Posted February 20, 2009 Author Share Posted February 20, 2009 that front cut is going to feel our wrath in the morning!!! :surrender: see you bright and early!!Certainly will old bean :drunk2: Quote Link to post Share on other sites
rob_bower Posted February 21, 2009 Share Posted February 21, 2009 wows home, dry and car emptied!! whoo a very productive day mr nath!!! just a quick pick of you with the fruits of our labour!!! :surrender: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.