Jump to content

Recommended Posts

hey people been on the forum a whyle naw so fort maybe it was time i started a build thread to show you all wat ive been up to!

i have had a few starlets over the years white sr white ep82 gt alsou built my self a 3sgte ae111 corolla wich was imense i must say!

any way naw here is my starlet sr turbo i had it on the rr today it made 226 at the wheels and 265 at the fly wheel running 1.2 bar

spec list

Engine:

4efte engine

wiseco 10cc dish pistons

scat con rods

acl bearings

polished ported head

port matched manifolds

5efhe camshafts

rc 440 cc injectors

os giken hyper super singel clutch

quaife atb diff

zisco td04 kit

tial 41mm waistgate

magnercore leads

iridium plugs grade 8

alloy catch tank

alloy header tank

slimline fan

custom fmic

pipercross airfilter

mocal oil cooler

hks evc pro boost controller

stack boost gauge

stack oil pressure gauge

walbro 255 lbh fuel pump

Handling

power flex bushes

meister r coilovers

team dynamic 15 alloys

rear disc conversion

interior and ice

jvc head unit

starlet gt seats

infinity 6x9s

car001.jpg

car008.jpg

japfestweekend014.jpg

sideexit001.jpg

sideexit002.jpg

Link to post
Share on other sites

thanks!! little stuff like that pisses me rite off, i hate rattles, so if its fitted, its tight, and it cant rattle!! and if theres a bracket that toyota made to hold something, it gets used!! simples!! lol

the engine was a st165 version, hence it used a chargecooler system. it got rolling roaded at 220 bhp and engine was completely stock, jus rebuilt to standard specs. went rly well tho.

Link to post
Share on other sites

I think he might of "clocked the turbo" i.e with his set up been external wastegated he dosnt need to use an actuator, there for the cold side of turbo can be spun anywhere you want it.. in most case's people do it to shorten the lenth of the intercooler pipe route giveing much quicker spooling time also depending how your turbo is set up people also clock a turbo because the oil return might be on an angle and needs to be faceing down so the oil can drain off the turbo :)

Link to post
Share on other sites

i have set the turbo like that so it keeps the pipework as short as possible, have a look in the pice below to see how my pipework runs.

151220101232.jpg

and a pic with the meisters fitted, had to raise the fronts 10mm to get it to sit like that, was rly low!! lol

151220101239.jpg

you can get the car lift jack thing from here

http://www.cjautos.site90.net/mini.html

Link to post
Share on other sites

haha this is my old car.. think your the 4th owner since i had it :) still got my old private reg that i put on too..

looks like your giving it some loving, glad to see uve kept the MASSIVE intercooler core haha

will be keeping an eye on this now.. good luck with it all :p

Link to post
Share on other sites

ye the cars got something like 8 previous owners onit!!haha so its been around a bit, i think the intercooler is the only bit that i re used on the whole car, everything has been changed, i have wired a new loom in, new engine, new gearbox, suspension, and the intercooler is getting changed for a smaller one soon, so that the radiator has more air supply, it was getting very hot on the rolling road!!

i was very suprised that the old engine actually ran, there were so few wires actually conected on the ecu, and most very poorly!!!, i decied to rip it all out and start again!!!! the body and panelwork took some straightening aswell! looks like it had a few bumps in its life!!

lol

have you got any pics of it when you had it?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...