glanzagee Posted August 29, 2013 Share Posted August 29, 2013 francis that ecc flywheel is far too light Quote Link to post Share on other sites
roundie69 Posted August 29, 2013 Share Posted August 29, 2013 I'm hoping for 400bhp, its at race tech, Just want it back now, I've been waiting a year and to be honest I have lost interest ;-( I'm sure that will change when I get it back ;-). I've never used TD but I have had numerous conversations with the guy there and he seems a very genuine guy. I know a lot of people who have used TD and the feedback is good. The most fun I have had in the last year is driving my 69 bhp diesel beast (Work car). I got the stop watch out..... it did 0-60 is 14.8 seconds and it couldn't make it to 100 mph but got to 80mph in about 19 seconds. ;-) Must admit, I'm not one for biggin up other cars on the Toyota Forum but a re mapped 335d I took out two days ago took the p123. It smashed everything in gear 50 - 90, the torque was amazing. Quote Link to post Share on other sites
mattyD Posted September 15, 2013 Share Posted September 15, 2013 (edited) Let me just bring to your attention a few results and points Mr D..... Firstly. string and aaddzz123's starlet GT's... String pulled 242.9bhp on Monster Motorsport's Dyno before TD bought it off them... (Dyno Dynamics Roller) aaddzz123 bought the turbo kit off String, and got his car mapped on another bone stock 4efte on the same ecu, and pulled 242.3bhp... Secondly, Hawwy's Glanza.... Hawwy bought a black glanza from hough39.... Spoke to hough39, his car pulled 313bhp at 1.3bar on a dyno dynamics roller It went into to race-tech and pulled 303bhp at the same boost and on the same map... Thirdly, ro55ifumi When he was running a ct9... Pulled 186bhp on a Dyno Dynamics Roller Then went on to pull 188bhp on Race-Techs dyno at the same boost pressure.... Forthly, My Own Glanza..... Back when I was running 1.4bar of boost on a pretty much identical turbo kit to yourself Matt. I made 344bhp. You made 330bhp? At the same boost? Which is not bad for a forged 5e with a standard head... Lastly... Are you telling me Ryan-11, Mark1991, Browner's cars are all not believable figures being over 340bhp...? Tbh, I couldn't give a monkeys what my car or anyone elses car pulls on any dyno, there a tuning tool. However I don't think the margin your talking about exists, or if there is a margin it certainly isn't as big as you sound like you want it to be! With regards to your points mate, do you not find it a bit funny that all those cars where mapped on a Dyno dynamics before going to Race-Tech? so obviously people knew what figures were made and kind of 'fixed' things if want for a better word? I wouldn't mind seeing a Race-Tech tuned car on the TD rollers, possibly..............................yours? The same with the always kind of stange smooth lines during boost, how have they discovered something that no other tuner has ever managed to do? look at all other boost graphs and compare them I know you can mess with the software on the dyno he uses and change things around to suit! With regards to the other guys cars you mentioned, they don't come in to question as they where mapped elsewhere and not on the same dyno so there figures are irrelevant. I think a few people care about what it pulls on the dyno, what's the point in having the power leaderboard that one himself created? I imagine there could be some kind of difference and it didn't take long for someone else (Hawwy) to kind of back me up. Edited September 15, 2013 by mattyD Quote Link to post Share on other sites
TurboTobz Posted September 15, 2013 Share Posted September 15, 2013 Might as well change the forum name to worship racetech Quote Link to post Share on other sites
RobSR Posted September 16, 2013 Share Posted September 16, 2013 ^ I have no opinion on any traders but that did make me LOL Quote Link to post Share on other sites
Socks Posted September 16, 2013 Share Posted September 16, 2013 With regards to your points mate, do you not find it a bit funny that all those cars where mapped on a Dyno dynamics before going to Race-Tech? so obviously people knew what figures were made and kind of 'fixed' things if want for a better word? I wouldn't mind seeing a Race-Tech tuned car on the TD rollers, possibly..............................yours? The same with the always kind of stange smooth lines during boost, how have they discovered something that no other tuner has ever managed to do? look at all other boost graphs and compare them I know you can mess with the software on the dyno he uses and change things around to suit! With regards to the other guys cars you mentioned, they don't come in to question as they where mapped elsewhere and not on the same dyno so there figures are irrelevant. I think a few people care about what it pulls on the dyno, what's the point in having the power leaderboard that one himself created? I imagine there could be some kind of difference and it didn't take long for someone else (Hawwy) to kind of back me up. I fail to see the point your trying to make on how being mapped and run on different dynos before being run on Race-Techs dyno? So your telling me, that Race-Tech looked up and researched on the internet for any previous results, before running it on there dyno and "adjusting" figures to look accurate? Really? Other Guys? Mapped Elsewhere? When does where it was mapped have anything to do with how much power is produced on a Dyno? You really seem to have a real issue with jealousy and question other peoples setups.... I couldn't give a monkeys what figures my car pulls, if you'd like to go for a run down a motorway, id be happy to give you a run? The POINT of the power leaderboard is for people to compare results. IE, if someone has 35bhp more then you on the same turbo and boost pressure. Who wouldn't be interested to find out why that was... I feel you look far too much into it... Its a number dude... Quote Link to post Share on other sites
Mad Mike EP82 Posted September 16, 2013 Share Posted September 16, 2013 Why don't you TD boys come TOTB next year and take on Race-Tech cars. And for the record I've done power runs at Scooby clinic and TRL developments both dyno dynamics 19 bhp difference. Quote Link to post Share on other sites
RobSR Posted September 16, 2013 Share Posted September 16, 2013 (edited) if people really are that bothered, someone just do a run on TD's dyno then take it to RT straight after and see what happens for godsake Edited September 16, 2013 by RobSR Quote Link to post Share on other sites
Ricky@Race-Tech Posted September 16, 2013 Share Posted September 16, 2013 With regards to your points mate, do you not find it a bit funny that all those cars where mapped on a Dyno dynamics before going to Race-Tech? so obviously people knew what figures were made and kind of 'fixed' things if want for a better word? I wouldn't mind seeing a Race-Tech tuned car on the TD rollers, possibly..............................yours? The same with the always kind of stange smooth lines during boost, how have they discovered something that no other tuner has ever managed to do? look at all other boost graphs and compare them I know you can mess with the software on the dyno he uses and change things around to suit! With regards to the other guys cars you mentioned, they don't come in to question as they where mapped elsewhere and not on the same dyno so there figures are irrelevant. I think a few people care about what it pulls on the dyno, what's the point in having the power leaderboard that one himself created? I imagine there could be some kind of difference and it didn't take long for someone else (Hawwy) to kind of back me up. Boost plot smoothing had nothing to do with the dyno. It's the electronics on the map sensor I fitted that work very well. When in the car does your boost go up and down on the gauge or is it nice and smooth. I'd hope the latter. So the dyno should read the same. Quote Link to post Share on other sites
JordanEP91 Posted September 16, 2013 Share Posted September 16, 2013 I'm a bit behind time but how come there's so much slagging off about racetech? Or am I getting the wrong end if the stick? Quote Link to post Share on other sites
Mad Mike EP82 Posted September 16, 2013 Share Posted September 16, 2013 I'm a bit behind time but how come there's so much slagging off about racetech? Or am I getting the wrong end if the stick?People are slagging race- tech off saying there dyno is not accurate compared with TD's dyno. Quote Link to post Share on other sites
Mad Mike EP82 Posted September 16, 2013 Share Posted September 16, 2013 I will race any TD starlet...... RACE-TECH FTW......... Quote Link to post Share on other sites
yaristurbo Posted September 16, 2013 Share Posted September 16, 2013 I will race any TD starlet...... RACE-TECH FTW.........How many td starlets are their? Shoot out day? Quote Link to post Share on other sites
Mad Mike EP82 Posted September 16, 2013 Share Posted September 16, 2013 How many td starlets are their? Shoot out day?They would rather look at dyno print outs and bitch about other tuners than drive there cars mate. Quote Link to post Share on other sites
TurboTobz Posted September 16, 2013 Share Posted September 16, 2013 ^ I have no opinion on any traders but that did make me LOL Bit of banter does the world of good Quote Link to post Share on other sites
Sam_Brian_Nisbet Posted April 15, 2014 Share Posted April 15, 2014 They would rather look at dyno print outs and bitch about other tuners than drive there cars mate.Theirs alot of dynos up here in Scotland that are giving out outrageous numbers! If people believe the power they have they are defos delusional! Aye race tech could give a good 20-40hp more! Its a big possibility but its only a tool end of the day! But watching videos of mine at a bar is insane to ofther people's running more boost and allegedly more power than me? That's where u notice and think the power estimated is well offI doubt very much! Quote Link to post Share on other sites
Socks Posted April 15, 2014 Share Posted April 15, 2014 But watching videos of mine at a bar is insane to ofther people's running more boost and allegedly more power than me? That's where u notice and think the power estimated is well off I doubt very much! We going to compare our cars after Japfest Sam? ;)? Quote Link to post Share on other sites
Sam_Brian_Nisbet Posted April 15, 2014 Share Posted April 15, 2014 We going to compare our cars after Japfest Sam? ;)?Lol i wasn't just on about your car! Theirs a few up here that are well over estimated! But aye! As long as there's a straight and obvious enough road! side by side pull! I might even keep mine @ 1bar for you! Quote Link to post Share on other sites
Socks Posted April 15, 2014 Share Posted April 15, 2014 Lol i wasn't just on about your car! Theirs a few up here that are well over estimated! But aye! As long as there's a straight and obvious enough road! side by side pull! I might even keep mine @ 1bar for you! Never said you were Sam Sounds like a plan, see you there... Quote Link to post Share on other sites
Mikeyallgood85 Posted April 15, 2014 Share Posted April 15, 2014 Definitely get a video of this ^^^ Quote Link to post Share on other sites
daniel_g Posted April 15, 2014 Share Posted April 15, 2014 Theirs alot of dynos up here in Scotland that are giving out outrageous numbers!What dynos in Scotland are giving daft numbers like ? Quote Link to post Share on other sites
Mad Mike EP82 Posted April 15, 2014 Share Posted April 15, 2014 Race round Donington would be the best way to show your cars true performance. Quote Link to post Share on other sites
Socks Posted April 15, 2014 Share Posted April 15, 2014 Race round Donington would be the best way to show your cars true performance. Ive been round donington a fair bit, but yet to do it in my Glanza... Until Japfest 2 Quote Link to post Share on other sites
Amjad Posted April 15, 2014 Share Posted April 15, 2014 Ive been round donington a fair bit, but yet to do it in my Glanza... Until Japfest 2 And about time too! Not enough EP owners use their cars what they're built for Quote Link to post Share on other sites
Rob Scott Posted April 16, 2014 Share Posted April 16, 2014 yup correct. i dont see the point in spending loads on an engine if your not going to race it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.