What power region would you say my soon to be glanza is pushing?

[Tyron Devine]

As above guys just a rough estimate of what power the glanza is pushing:

The mods are:

.Front mounted Air filter
.HKS adjustable actuator

.CT9 waste gate ported

.HDI Fmic

.road runner mild steel manifold

.Blitz de-cat downpipe

.fujitsubo exhaust

.maginore ht leads

.walbro fuel pump

Engine tourque damper

Power flex engine & gearbox mounts

Edited January 14, 2013 by Tyron Devine

[russ78]

on a stock CT9 set at a bar you should see between 170-180bhp

[Tyron Devine]

Sweet mate pretty good figure

Edited January 14, 2013 by Tyron Devine

[russ78]

to raise boost level to 1 bar you would need a FCD along with a RRFPR

[mattyD]

I would say max 150 at the moment mate

[pick1]

Don't worry so much on figures if u enjoy driving it then that's all that matters dude

[Amjad]

Probably 160ish but will be around 180-190bhp at 1bar

[hough39]

150-160bhp

[pick1]

^^^ I do agree with Amjad though about 160bhp at mo

[Michael!]

i had a similar setup to urs and mapped on a emanage ultimate at 1 bar made 160hp so wud exspect urs to be around 130max

[Tyron Devine]

130? they are 133bhp stock

[Amjad]

i had a similar setup to urs and mapped on a emanage ultimate at 1 bar made 160hp so wud exspect urs to be around 130max

Something was deffo wrong there then. Bolt ons can consistently get 150-160bhp and 1 bar is known to be 180-190bhp typically

[Michael!]

suppose every engines different, but that was mapped on td dyno. infact i wasnt bothered about dyno figures it drove like a diff car.

[Beastmode panda]

130bhp max, lol.. they're 135bhp standard?

[Michael!]

i very much doubt there still 133hp after 15 or more years.

Edited January 14, 2013 by Michael!

[starletburkie]

at 0.8bar i would say 140 - 150 bhp but you say psi so it would be 140 tops

Edited January 14, 2013 by starletburkie

[daniel_g]

Just put it on a dyno, we could be here guessing all night lol.

[Starbuck]

On ct9 at 1bar with an emanage blue mine made 150ish low boost 0.7 and 177ish high boost 1.0bar

So i'd recon 150-160bhp which to be fair on our cars is pretty nippy still.

[Beastmode panda]

i very much doubt there still 133hp after 15 or more years.

Yeah but that's bog standard figure. With the supporting mods that boyo has listed in his first post i agree with the others and say around the 150 - 160 mark tbh.

[dereksti]

thats what my spec was round about the last time I was on a 1/4 mile and I was about 180bhp and running 14.9 down the strip.

[Tyron Devine]

To ease my own mind & everybody else's I am going to get it on the dyno next week & will post the results up :-)

[daniel_g]

Good decision, my guess it bang on 150 bhp.

[Beastmode panda]

My guess is one hundred and something point zero 2.

[ryan lang]

im agreeing with micheal, but only if the figures a at the wheel

you lot are going off fly power, so he not wrong if hes going off wheel power

[PaulStarletSR]

137bhp standard.....il say with all those mods on 1.1bar ul be close to 190bhp