Tyron Devine Posted January 14, 2013 Share Posted January 14, 2013 (edited) As above guys just a rough estimate of what power the glanza is pushing: The mods are:.Front mounted Air filter.HKS adjustable actuator.CT9 waste gate ported.HDI Fmic.road runner mild steel manifold.Blitz de-cat downpipe.fujitsubo exhaust.maginore ht leads.walbro fuel pumpEngine tourque damperPower flex engine & gearbox mounts Edited January 14, 2013 by Tyron Devine Quote Link to post Share on other sites
russ78 Posted January 14, 2013 Share Posted January 14, 2013 on a stock CT9 set at a bar you should see between 170-180bhp Quote Link to post Share on other sites
Tyron Devine Posted January 14, 2013 Author Share Posted January 14, 2013 (edited) Sweet mate pretty good figure Edited January 14, 2013 by Tyron Devine Quote Link to post Share on other sites
russ78 Posted January 14, 2013 Share Posted January 14, 2013 to raise boost level to 1 bar you would need a FCD along with a RRFPR Quote Link to post Share on other sites
mattyD Posted January 14, 2013 Share Posted January 14, 2013 I would say max 150 at the moment mate Quote Link to post Share on other sites
pick1 Posted January 14, 2013 Share Posted January 14, 2013 Don't worry so much on figures if u enjoy driving it then that's all that matters dude Quote Link to post Share on other sites
Amjad Posted January 14, 2013 Share Posted January 14, 2013 Probably 160ish but will be around 180-190bhp at 1bar Quote Link to post Share on other sites
hough39 Posted January 14, 2013 Share Posted January 14, 2013 150-160bhp Quote Link to post Share on other sites
pick1 Posted January 14, 2013 Share Posted January 14, 2013 ^^^ I do agree with Amjad though about 160bhp at mo Quote Link to post Share on other sites
Michael! Posted January 14, 2013 Share Posted January 14, 2013 i had a similar setup to urs and mapped on a emanage ultimate at 1 bar made 160hp so wud exspect urs to be around 130max Quote Link to post Share on other sites
Tyron Devine Posted January 14, 2013 Author Share Posted January 14, 2013 130? they are 133bhp stock Quote Link to post Share on other sites
Amjad Posted January 14, 2013 Share Posted January 14, 2013 i had a similar setup to urs and mapped on a emanage ultimate at 1 bar made 160hp so wud exspect urs to be around 130max Something was deffo wrong there then. Bolt ons can consistently get 150-160bhp and 1 bar is known to be 180-190bhp typically Quote Link to post Share on other sites
Michael! Posted January 14, 2013 Share Posted January 14, 2013 suppose every engines different, but that was mapped on td dyno. infact i wasnt bothered about dyno figures it drove like a diff car. Quote Link to post Share on other sites
Beastmode panda Posted January 14, 2013 Share Posted January 14, 2013 130bhp max, lol.. they're 135bhp standard? Quote Link to post Share on other sites
Michael! Posted January 14, 2013 Share Posted January 14, 2013 (edited) i very much doubt there still 133hp after 15 or more years. Edited January 14, 2013 by Michael! Quote Link to post Share on other sites
starletburkie Posted January 14, 2013 Share Posted January 14, 2013 (edited) at 0.8bar i would say 140 - 150 bhp but you say psi so it would be 140 tops Edited January 14, 2013 by starletburkie Quote Link to post Share on other sites
daniel_g Posted January 14, 2013 Share Posted January 14, 2013 Just put it on a dyno, we could be here guessing all night lol. Quote Link to post Share on other sites
Starbuck Posted January 14, 2013 Share Posted January 14, 2013 On ct9 at 1bar with an emanage blue mine made 150ish low boost 0.7 and 177ish high boost 1.0bar So i'd recon 150-160bhp which to be fair on our cars is pretty nippy still. Quote Link to post Share on other sites
Beastmode panda Posted January 14, 2013 Share Posted January 14, 2013 i very much doubt there still 133hp after 15 or more years. Yeah but that's bog standard figure. With the supporting mods that boyo has listed in his first post i agree with the others and say around the 150 - 160 mark tbh. Quote Link to post Share on other sites
dereksti Posted January 14, 2013 Share Posted January 14, 2013 thats what my spec was round about the last time I was on a 1/4 mile and I was about 180bhp and running 14.9 down the strip. Quote Link to post Share on other sites
Tyron Devine Posted January 14, 2013 Author Share Posted January 14, 2013 To ease my own mind & everybody else's I am going to get it on the dyno next week & will post the results up :-) Quote Link to post Share on other sites
daniel_g Posted January 14, 2013 Share Posted January 14, 2013 Good decision, my guess it bang on 150 bhp. Quote Link to post Share on other sites
Beastmode panda Posted January 14, 2013 Share Posted January 14, 2013 My guess is one hundred and something point zero 2. Quote Link to post Share on other sites
ryan lang Posted January 15, 2013 Share Posted January 15, 2013 im agreeing with micheal, but only if the figures a at the wheel you lot are going off fly power, so he not wrong if hes going off wheel power Quote Link to post Share on other sites
PaulStarletSR Posted January 15, 2013 Share Posted January 15, 2013 137bhp standard.....il say with all those mods on 1.1bar ul be close to 190bhp Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.