shorty Posted October 13, 2013 Share Posted October 13, 2013 (edited) i will begin to remove parts as and when they sell, if the engine or shell goes quick the ill break the whole car in a weekend so the buyer can collect their parts without delay. pics of specific items can be taken but please check my build thread in the 4wd section of owners blogs first as most items have been pitured throughout the build. also any "no why break it" convos please keep to my build thread. this is a breaking thread only guys. I've thought long and hard about this and buying my house has taken prioraty im gutted enough at this too. so help me out and spend your cash Item's & Pricing For Sale: Forged 4E £2000billet 265 camscruise valve springsfully port polished headArp head boltsAthena 1.4mm hgTRD thermostatJE 75.5mm pistonscustom Cunningham forged rodsknife edged polished crankArp bottom end boltspower enterprise timing beltlight weight crank, waterpump pullys and roose motorsport rear water pump hose.engine has done a total of 10k over the years, its bomb proff and recently been put back together with the pp head on. the car isn't currently in a running state and the engine will need timing in when installed. the 75.5mm pistons make it aprox 1386cc engine so it is more than capable of running big turbo kits with minimal lag. the engine is a labour of love and my pride an joy, no expense was ever spared when maintaining it and you will not see another like it EVER. More in depth pics through out my build thread of the internals. EP85 4wd rolling shell £2500 SOLDthe shell comes with stripped interior rolling on 4x steel space savers, stock brakes, oem steering wheel, but has custom flat door cards, flocked dash and gt loom all fitted already, also has full gt bodykit fitted, does not come with jam bonnet it will come with a black stock gt bonnet. the car was an s model so came with full electrics like a gt and being an ep85 has the rear anti roll bar fitted too, the car is also fitted with zoom lowering springs specifically designed for the 4wd starlets, bit harsh on ride but corners like a whore! shell has covered around 47k miles iirc and is very very clean, but does have some laqure peel on the roof and one rear quarter, common for the ep8* cars. Zisco fuel rail, fuel labs rrfpr, an6 uprated fuel filter and all an6 lines £280560cc injectors £120Custom inlet manifold with 60mm billet tb (same inlet as the WEPR demo car) £500ORC 309 cluth kit with spare pressure ring and clutch disk! £500power flex engine mounts £100Roose radiator hoses £50Civic alloy rad with jd ep82 mounting brackets and spall fan £80Oil filter relocation kit £100FMIC kit with hks sqv and micklor clamps £250WEPR m/s td04 ram manifold £250WEPR s/s gt28 top mount manifold £400VF24 and VF30 turbos with lines for the vf24 £280 the pairTurbo smart 38mm exterbal wastegate with 1bar spring £120Air filter relocation kit £120Ultra rare TRD optional extra bucket seat on ep82 rw developments rail £250Trd harnesses £150TC short shifter kit £130Link G3 stand alone ECU with starlet auto tps £550HKS EVC4 boost controller £250Defi HUD rev/speed unit £140 SOLDDepo boost, oil temp, oil pressure gauges £150 prov soldDepo AFR gauge £100 prov soldBuddy club earthing and voltage stabaliser kit £1009 point ep82 cusco cage £550c-pillar brace £80power flex polly bushed wishbones £60power flex antilift kit £50OUTLAW 2000 4pot brake kit £600Jam fibreglass ep82 bonnet £550ID Workz front vented ep82 wings £150ep85 specific aftermarket drivers and passenger subframes £280 the pair SOLD Pictures: Payment & Shipping Details: shipping is not included on any prices. im willing to ship but collection is far preffered. cash on collection or paypal but cover the 4% fees. bank transfer ill also accept and although its normal not recomended I've been on the scene long enough for most to know im no scammer. Edited October 13, 2013 by shorty Quote Link to post Share on other sites
ryan lang Posted October 13, 2013 Share Posted October 13, 2013 ive approved it, but now i have to kill you Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 cheers ryan Quote Link to post Share on other sites
lew777 Posted October 13, 2013 Share Posted October 13, 2013 Would a gt30 fit that mani shorty? Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 Yes lew it will mate. I was gonna run a gtx3076r on it. But ill save the plans for the next build buy it lew! Will look savage in your bay bud! Quote Link to post Share on other sites
AdamB Posted October 13, 2013 Share Posted October 13, 2013 Is it a T25 or T3 flange mate? As the gt30 uses T3, and the gt28 uses a T25. Quote Link to post Share on other sites
garrygt Posted October 13, 2013 Share Posted October 13, 2013 Why does an ep85 come up for sale when i have no money. Fuck sakes. Quote Link to post Share on other sites
Jamie1st Posted October 13, 2013 Share Posted October 13, 2013 Is it a T25 or T3 flange mate? As the gt30 uses T3, and the gt28 uses a T25.There are more variations out now dude. Can request either flange. You can even get gt30's on a TD/VF flange these days Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 Yup ^ as above gt30 comes in a ton of flange fitments now. Alk edited as price was wrong Quote Link to post Share on other sites
AdamB Posted October 13, 2013 Share Posted October 13, 2013 There are more variations out now dude. Can request either flange. You can even get gt30's on a TD/VF flange these daysWheres that from? The garrett supplier I've used before still only list T3 inlet flanges. I might be interested in the cage if its still here come payday buddy Quote Link to post Share on other sites
Jamie1st Posted October 13, 2013 Share Posted October 13, 2013 Wheres that from? The garrett supplier I've used before still only list T3 inlet flanges. I might be interested in the cage if its still here come payday buddy Never bought one my self but if you're interested, speak to Dean @ RW Developments, he knows lads that run them on there VAGs Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 (edited) list updated, shell and few other bits sold! cage is still here ads bud but is getting interest already Edited October 13, 2013 by shorty Quote Link to post Share on other sites
daniel_g Posted October 13, 2013 Share Posted October 13, 2013 Some very nice stuff here Shorty. Whos had the shell then, or is it a big secret lol ? Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 cheers dan, alot of stuff tats hard to get too im not disclosing the new owner lol ill not steel thier thunder. Quote Link to post Share on other sites
daniel_g Posted October 13, 2013 Share Posted October 13, 2013 Yep indeed very hard got stuff. Eagerly awaiting new owner info Quote Link to post Share on other sites
AdamB Posted October 13, 2013 Share Posted October 13, 2013 Never bought one my self but if you're interested, speak to Dean @ RW Developments, he knows lads that run them on there VAGs Ah okay was just interested to know thats all. Obviously flow will be choked though if going smaller tnan what its intended for. list updated, shell and few other bits sold! cage is still here ads bud but is getting interest alreadyI thought it might lol, I'll have a check of your build thread for more pics mate, already bought rare jdm part this month Quote Link to post Share on other sites
Jamie1st Posted October 13, 2013 Share Posted October 13, 2013 Ah okay was just interested to know thats all. Obviously flow will be choked though if going smaller tnan what its intended for. I thought it might lol, I'll have a check of your build thread for more pics mate, already bought rare jdm part this month We're going off topic abit here, but there are bigger turbos than a gt30 that come on a TD flange as standard, so I can't see it restricting a gt30 Quote Link to post Share on other sites
bucketep91 Posted October 13, 2013 Share Posted October 13, 2013 Sad to see this thread mate! Gutted your not finishing it:( she would have been a monster! Whats your best price on the manifold and wastegate posted?Is the new owner on here? Quote Link to post Share on other sites
turboloon Posted October 13, 2013 Share Posted October 13, 2013 if the sale falls through on the shell give me a shout;) Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 Which mani charlie? The ms td one? Or the ss top mount one?and turboloon i will do but i dont see it falling through. And yes owner is a ukso member Quote Link to post Share on other sites
Amjad Posted October 13, 2013 Share Posted October 13, 2013 Don't forget to hold the wings and filter relocation for me bud Quote Link to post Share on other sites
ryan lang Posted October 13, 2013 Share Posted October 13, 2013 what c-pillar bar is it mate? if its zisco, was it the ep82 would fit the ep91, or the ep91 would fit the ep82? i can never remember lol Quote Link to post Share on other sites
bucketep91 Posted October 13, 2013 Share Posted October 13, 2013 The td one mate;) Quote Link to post Share on other sites
shorty Posted October 13, 2013 Author Share Posted October 13, 2013 Ill get ya a price tomorrow charlie pm me your address dude. Ryan i honestly dont know dude tbh its not a zisco i know that... i think lolAnd i remeber amjad ;) Quote Link to post Share on other sites
iamlegend Posted October 14, 2013 Share Posted October 14, 2013 Why do you never finish a project ? LolGlanza was about done then broke now this.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.