RobSR Posted March 29, 2015 Author Share Posted March 29, 2015 Nah not gonna be a daily, have a company car that gets used for that. No sold it, was going to have it all custom made, Si has since gone and brought something else rather legend that will destroy any starlet round a track so gave up on that.I'll keep the beam but might do something with the panhard rod in the future.Bay has been primed today. Quote Link to post Share on other sites
RobSR Posted March 30, 2015 Author Share Posted March 30, 2015 Couple of pics now its primed... Ignore the over spray on the brake lines - they're all going in the bin! IMG_0904 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_0914 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
RobSR Posted March 31, 2015 Author Share Posted March 31, 2015 Got the bay painted this evening - Primed and masked: IMG_0920 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Colour of choice - keeping it original Toyota.. IMG_0918 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Some finished pics - very happy with the finish straight off the gun! IMG_0924 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_0943 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_0946 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_0945 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
RobSR Posted March 31, 2015 Author Share Posted March 31, 2015 Start of the power steering setup.. IMG_0939 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr PTFE lined hose and fittings to cope with the PAS fluid and pressure.. IMG_0940 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Proper o-ring m16 & m18 to AN-6 adapters IMG_0941 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Testing fitment in the rack...going to run the lines along the bottom of the bulkhead into the passenger footwell and secure with p-clips or similar. Undecided whether to just put grommets on the bulkhead, or to run bulkhead an- fittings..later being better, but then more chance of leaks! IMG_0917 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_0916 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
maddox710 Posted April 1, 2015 Share Posted April 1, 2015 Power steering setup looks smart rob, i just used the pump with remote resivoir and just use toyota hoses .fitted perfectly, where are yougoing to locate pump.night mare trying to locate an mount the damn thing Quote Link to post Share on other sites
RobSR Posted April 1, 2015 Author Share Posted April 1, 2015 It's going to go in the passenger footwell I think.. Run the lines down the bottom of the bulkhead and through. Quote Link to post Share on other sites
maddox710 Posted April 1, 2015 Share Posted April 1, 2015 Easiest place for it mate, good luck let us know how you get on Quote Link to post Share on other sites
jellybaby Posted April 1, 2015 Share Posted April 1, 2015 looking good feller quick question tho as I seeing a lot of peeps doing this. my question is do u have it running all the time ie like the standed system or do you have it on a switch ??? as people don't seem to give much feed back on running them etc I got a pug ps pump alreadys but still in two minds to fit it Quote Link to post Share on other sites
Charlie28 Posted April 1, 2015 Share Posted April 1, 2015 Bay looks sweet mate, feel free to come and do mine! Quote Link to post Share on other sites
RobSR Posted April 1, 2015 Author Share Posted April 1, 2015 looking good feller quick question tho as I seeing a lot of peeps doing this. my question is do u have it running all the time ie like the standed system or do you have it on a switch ??? as people don't seem to give much feed back on running them etc I got a pug ps pump alreadys but still in two minds to fit it Mine will be wired into a switch so it can be turned off when upto speed...feels a lot nicer! Bay looks sweet mate, feel free to come and do mine! Haha painting it isn't hard, its just the prep and time etc! Quote Link to post Share on other sites
RobSR Posted April 1, 2015 Author Share Posted April 1, 2015 (edited) More work this evening - mainly spent sorting out the clutch and brake master cylinders!During re-freshIMG_0949 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickrspending time doing the smaller bits too!IMG_0950 by Rob Fisher [RobFisherPhotographic.co.uk], on FlickrMocked up back in the bayIMG_0952 by Rob Fisher [RobFisherPhotographic.co.uk], on FlickrClutch master cylinder shouldn't be looking like that! Nearly finished this one..no pics yetIMG_0951 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Edited April 1, 2015 by RobSR Quote Link to post Share on other sites
ro55ifumi Posted April 2, 2015 Share Posted April 2, 2015 Quality work Rob John Quote Link to post Share on other sites
Bluebear Posted April 2, 2015 Share Posted April 2, 2015 Brilliant work mate! Quote Link to post Share on other sites
RobSR Posted April 3, 2015 Author Share Posted April 3, 2015 Cheers guys. My solid brake line has turned up so gonna have fun making those up, other parts I've gotta wait on toyota for.. Currently about two weeks atm! Quote Link to post Share on other sites
_shaun_ Posted April 3, 2015 Share Posted April 3, 2015 looking good seems everyone is doing the electric pas converstion now ha! not bad on a track car but the pump makes a fair sound think it would drive me crazy in the pass foot well. Quote Link to post Share on other sites
RobSR Posted April 3, 2015 Author Share Posted April 3, 2015 I planned to do it about 4 years ago but never did.. Everyone's caught up lol! Yea I'm thinking it might be quite loud, especially combined with a Bosch 044 inside.. If it does my head in I'll move it ..! Quote Link to post Share on other sites
_shaun_ Posted April 3, 2015 Share Posted April 3, 2015 aye id seen threads of all the older timers talking about trying it and noone seemed to have went through with it. since i done mine had to pm like 6-7 people with exactly how i done mine. this time next year i think it will be a novotly to see a glanza with the stock pas system ha! i was impressived with how noisy it was to be honest i have some sound deadening stuff sitting for next time i have my bumper off to try pad out some of the noise as it sits right at my front bumper its farily notiable standing next to the car Quote Link to post Share on other sites
RobSR Posted April 8, 2015 Author Share Posted April 8, 2015 aye id seen threads of all the older timers talking about trying it and noone seemed to have went through with it. since i done mine had to pm like 6-7 people with exactly how i done mine. this time next year i think it will be a novotly to see a glanza with the stock pas system ha! i was impressived with how noisy it was to be honest i have some sound deadening stuff sitting for next time i have my bumper off to try pad out some of the noise as it sits right at my front bumper its farily notiable standing next to the car Haha yes indeed, no one can work anything out themselves now lol! Ah I'm sure it'll be okay, it'll be turned off when upto speed, anyways theres going to be a bosch 044 in there so its going to be noisy enough anyways! More progress.. Bonnet Catch & Front panel support fretted in gloss black.. 10003512_10153172454975196_5572410978231003126_n by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Rolled it out of the garage..paint looks lovely in the light! 10464099_10153175174565196_5778356542799705613_n by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Fresh nuts/bolts and more AN- bulkhead fittings for fuel lines. 11062324_10153180217910196_5890621629458406215_n by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Wiper motor re-fresh IMG_1025 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Did the coil bracket too - can't beat the look of fresh paint! IMG_1021 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_1020 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Fitted pics with said fresh bolts. IMG_1023 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_1027 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_1029 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr IMG_1028 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
Socks Posted April 8, 2015 Share Posted April 8, 2015 Doesnt get much fresher then that!Good work Rob... Quote Link to post Share on other sites
_shaun_ Posted April 8, 2015 Share Posted April 8, 2015 super fresh i hope to be able to take this time and attention in the bay next year once its all running mechanicaly bang on! Quote Link to post Share on other sites
RobSR Posted April 8, 2015 Author Share Posted April 8, 2015 Doesnt get much fresher then that! Good work Rob... Cheers Matt, still need to clean all the plastics on the coil / wiper motor but its getting there. super fresh i hope to be able to take this time and attention in the bay next year once its all running mechanicaly bang on! I thought id do all this first as i can't be arsed to take it out again apart from when it gets forged lol. Hoping to have the front brake lines done soon'ish & the PAS pump refurbed as it looks hanging. Need to drill and mount those AN- fittings in the bulkhead too. Quote Link to post Share on other sites
ro55ifumi Posted April 9, 2015 Share Posted April 9, 2015 Loving the attention to detail Rob, looking real nice look forward to seeing it in the flesh John Quote Link to post Share on other sites
RobSR Posted April 9, 2015 Author Share Posted April 9, 2015 Cheers mate! Just need toyota to hurry up with some brake line bits as they were all on back order so can't do loads atm! Quote Link to post Share on other sites
RobSR Posted April 9, 2015 Author Share Posted April 9, 2015 Toyota in Japan delivered the goods today! Some hardware for the brake lines..trying to use a lot of the original stuff for the abs/bias valve removal for ease and neatness.. Worked out cheaper to get the bits from Japan than the UK lol! The T-Piece was 6 quid i think, toyota over here wanted about 22! IMG_1042 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
RobSR Posted April 9, 2015 Author Share Posted April 9, 2015 Decided to partake in some midnight online shopping.. Screen Shot 2015-04-10 at 00.05.47 by Rob Fisher [RobFisherPhotographic.co.uk], on Flickr Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.