morgey

Sad day man:( any updates on the new one yet?

Congrats

How's it sit in the arches like that? Mine rubbed on the front arch linings with 15x6.5 195/50 et 38 with 10-15mm left to drop on bc's

Wasnt one a cat temp sensor not a lambda? Either way thats it

As above Opie Oils, redline, millers, etc I dont believe the OEM LSD requires LSD oil just normal stuff

The H mean high compression or high pressure, its nothing To do with the cams Paul ;) It would have made sence to do both at the same time though as high lift cams work better with higher compression

Haha no worries, They do have have high lift cams too but the comp ratio is 9.8/1 compared to the normal 5efe which is 9.4/1 hence the H in it

Pretty sure its high comp mate. http://www.toymods.org.au/forums/faq/309-toyota-engine-codes-explained.html

Give hawwy and idrees a pm each. One of them might have one

Great work guys, saw the videos on facebook, man that thing shifts Good luck on getting that 9second pass!

Yeah had to get One with Ss, couldn't have a Bz-R and not have it really, will end up costing a bomb eventually but im willing to pay. That blue ones john, spoke to him at jae the last couple of years, his is a pre facelift with the front end swapped. Is a lovely colour when its all polished up, He was moaning that my starlets vvt pulley was loads quieter than his lol

Yeh thats correct unless someone was going to town and doing a high comp boosted build! Tbh the H is only an indication that its a hyped up eco engine anyway (going to get abuse for calling It that) I mean the 4age 20v has a comp ratio for 11.1-1 and that didnt get the H treatment.

Yeah I know man, atm I cant sell any of them, I love my daily corolla just for abusability it just take abuse all day everyday down shitty little tracks and all sorts and laps it up, then the rest if the time is a perfect little run around. Starlet I've had for so long and its like my baby and I know that even though I dont drive it as much as id like I Would miss is so much just because the time and effort I've put into it, id hate to see someone ruin it all! Anyway! Got my first couple of little bits that Wanted, boot badge, rear veiw mirror, ash try holder and a new clock. Will be fitting them soon. Found a place that can map it so will get it all Seviced and get it booked in for that soon too! Also popped into my local Toyota Dealer today and ordered a new osf indicator, super strut stickers for the sides and a Bz-R sticker For the boot. I got a couple of oil filters whilst i was there too Got a bit to be getting on with now!!

Years of being about and following threads etc, facebook pages are good too thats where I realised P8 and P9 were used alot more abroad. Silly things really, I cant really call my car an ep91 now as its technically now an ap91 lol

Its people generalizing the series, ep91 and ep95 E is the engine series P9 is the chassis shape/style 0-1-2-5 is a variant within that chassis To say ep90 it covers the P9 chassis, in Europe they use P9 in reference a lot more than we do in the uk. If you were searching in eBay for example. We would use ep91 ep90. They would just use P9.

Gt glanza and na will all fit, you would just have to which all the drums etc over. Gt axles are 10 or 20mm narrower than ep91 axles. This should open your options a bit

Best way to tidy it is rip all the tape off and pull each plug and its wiring out individually then laying it Back where you need it just neater. With a bit more time and effort the injectors can be spun around and the wiring run under the inlet or fuel rail. Also move the sensors off the bulkhead lower down to hide them. With a Bit more time and effort you could make new brakelines and run them lower down so they are out of site, will also clean the bulkhead uo loads.

I would have thought so, IIRC they fit rota slipstreams 15" Should add I've got the 277x25mm kit not sure if youve the same or the bigger or smaller kit?

Theyre nothing to do with the engine at all, they control the abs system

They fit speedlines and my random jdm wheels. Both 15" by 6/both around et38 offset

Id works do them

Not actually wire tucked just neatened up and tied up a bit.

Look in the wiki section on the top bar mate theres a thread describing it with pictures

Dickheads who sit on a sliproad at 40mph... The idea of them is to get upto speed ffs!

Tbh it depends on if you're planning on tracking your car, my car was fine on my previous setup on the road and I drove it pretty hard, 20mins on track and they were done. Id imagine lighttrack work st185 or ae111 twin pots would be fine, but full days with plenty of abuse you would soon find the limit lol Aluminium is after all better at dissipating heat a is larger amounts of material and surface areas.