morgey

Make a list 1) morgey + passenger

Tut tut.... Uksc??? Lol

Stock engine = minimal problems Only other issue i have is it running to cold and killing my economy. But due to some stupid rad pipe I've had to have made its a nightmare to bleed the system so im saving the thermostat change till after JF! Anyway cant worry too much if it breaks it breaks, nothing i can do...

Haha ill put a beer in my cool box with your name on it

Wow you are seriously dedicated man. Hands down you deserve a medal Or at least a beer! My lists consists of: Maybe fit some Sr decals Lower my front suspension. Other than that I've got a rattle from a plate inside my collector on my header but that can wait until after JF haha

Yea i got a pretty bad dent in my drivers door and little dents all over. Stone chips all over the front etc etc just blag the rat look

Mmm very nice, love seeing fresh head's look soo good. Is the mottled finish on the inlet side to try help create some turbulent air to help mix the fuel?

What about a friend? the only people i know who can afford to move out are either coupled up or renting with a friend. And even then most cant afford to keep modifying there cars!

Mine unstuck itself on a really hot day! Lol

Get a house mate and share the bills. Seems the only way to do it atm! Hence why im still at home lol

Im planning on the 8pm sleep thing up around 1:30 then go from there. Luckily im staying at my passengers granddads in bristol saturday night so can get some sleep before heading home

Sleeper mode.... Yes it needs a splitter and lowering slightly on the front. Getting a cupra lip at JF hopefully and if he weather holds out on friday ill bring the front down a tad as well. I might even attempt to fit my SR decals for full sleeper spec ;-)

Nice, good to see you're taking your time getting everything checked and sorted to run proper sweet. Should be a good little motor when you're finished with it

Mines sun and rain. I dont really care, spare shoes and socks n ill be away lol

£32 lol

Sort my exhaust knock and change my wheels

Mid 25k (miles) so is low milage tbf. But yea i expected around the 155-165hp mark tbh. If you're on about the 2zz powered ones it does make sense to use a more modern powerful engine but thats even more effort to fit in a starlet lol. However i would love to see a k20 powered starlet like the k20 levin thats been done And yes you do have to chop the chassis leg or mount the engine very low but I've not had any issue with mine yet. (Cut leg on mine)

It depends on the engine really. I know dyno results can vary but mine dyno'd in at 175hp 122lbft and I've been alongside 185hp b18 ek civics that are fully stripped and sat side by side with them up to a fair speed. And that was me on full interior, so im fairly confident mine must be up in that reigion somewhere. Mines exhuast,mani, flywheel, trumpets, filter, sports cat, no power steering or aircon and still on the auto ecu

Silvertops use and air flow meter (Afm) whereas the blacktops run a Map sensor. This means the blacktops intake is much more open to tuning (Can be run on open) but the silvertop has to always be run with the intake pipe and plenum over the throttles. It is possible to put the blacktop ecu and map sensor setup onto the silver top which would be a good route to take to start with then when you need it get a standalone ecu for the final tuning. But things that are better on the blacktops are. Highercomp pistons 11.5:1 vs 11:1 Better designed ports on the head Larger throttlebodies. 45mm vs

10000RPM!!!!!!!!!!1111!!!!!!!!1!!!!!!!!!!!111111111111

Silvertops are about 5hp down on blacktops. Get a full exhaust, manifold decat, good cai, cams, trd 0.8mm head gasket and ecu and you should see around that figure. But the extra revs you might want to give it will be the killer for the stock blacktop rods.

Yeah blacktops rods are the week points. Ideally you would want silvertop or late spec 16v rods in a blacktop engine. If its to be boosted a little bit of work in the combustion chamber should be done to smooth out a couple of edges

Haha this will be savage with a 4age in it. What version you going for? 16 or 20v?

Very impressive dude, got a great little and very competitive motor there Good luck on future events!

Buy some glanza recaro rails. Or if you want really low bride low rider rails Recaro rails fit most recaro seats