adzy
-
Content Count
752 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by adzy
-
Only fitted mine last week, got an10 fittings welded on. Used oem gasket so hopefully it will be ok. I can't see there being enough heat to warp it
-
The flutter is compressor surge from excess boost coming back through the turbo. A sumo valve has a spring you can adjust the tension of so you can set how easy it opens, yours may be too tight atm. Or you could just do away with the dump valve, I don't run one and have no issues
-
Plastics of, then there are 2 bolts with dome heads holding the barrel to the column, you'll need to cut a line into the head of them so you can use a flat screwdriver to take them out. Then you just unplug the barell from the loom. Don't need the key in or matching ecu
-
friend took my car for mot I came home to this
adzy replied to ep82paul's topic in Lifestyle General
Doesn't mean it was thrashed, I know of a big powered escort that threw a leg out of bed at low revs -
Pipe from turbo compressor housing to top port of actuator, then t-piece into that pipe and run that into the boost controller solenoid, then the pipe coming out of the solenoid will go to the bottom port
-
It's just a myth I reckon, I drove to the end of the road and gave it some when I fitted mine lol
-
You don't need to run it in, just drive away. If that was the case you'd have to run it in every time you disconnect your battery etc
-
Fits perfect in my glanza
-
I got a Bosch (s4 018) battery in Euro car parts for a good price,
-
Idworkz where able to get me a genuine 3 pin coolant temp sensor for around £60 delivered.
-
Nice build and detailed write up! Will be keeping an eye on this
-
Yeh the welding is the cheap bit, the fittings are pricey. Fella I know welded mine for £5
-
Mine was my daily, it's currently a project, and will end up weekend/ocasional track car
-
Get the oil return of eBay. 19mm 90 degree fluoro lined silicon pipe, not much more than £10
-
Awesome work! Any better pics of what way you cut the dash for the cage?
-
Weight loss tread or common data allready collected?
adzy replied to MR-2's topic in Performance & Track Days
Must try and weight some of the stuff I've removed and see -
I've a trd one on my 91 and they're hollow, standard glanza one is solid. Noticed a big Difference in weight between them
-
I like them!
-
Lisbellaw, but work in Belfast all week
-
Yeh you get remote central locking with it. Was worth it just for that tbh lol. I got an auto spark to fit mine, think I paid him about £50
-
Toad ai606 is decent alarm and reasonably priced
-
Nice one mate! From Fermanagh myself
-
I think I paid about £30 from Toyota for all new studs and nuts for both mani and turbo
-
https://www.ebay.co.uk/itm/180989304283