TheAmerican

The new Initial D Legend 1 is finally out with subtitles!!! https://onedrive.live.com/?cid=fb36f283a672aaf6&id=FB36F283A672AAF6%2175716&ithint=video,mp4&authkey=!AJ115V2ndw2hoUM For those who don't know there has been a tv series called Initial D (anime) started in 2000. It is based around a Kid in Japan who gets introduced to the mountain street drifting/racing scene on Mount Akina (The actual name of this mountain pass is called Mount Haruna) in the early to mid 90's The seasons (stages) have not been consistent and with in the last few years they brought it back and continued the saga and it ended on stage 5. I highly recommend the watch Here are the stages (graphics get better with each stage) stage 1 >https://www.youtube.com/watch?v=SVG7zusJ1t8&list=PLB999A4FF1039DA5D Stage 2 >https://www.youtube.com/watch?v=xrpohdS5HvA&list=PL5C5A9080122E5FC1 Stage 3 (movie) I prefer subs and not english dub but this is what i could find >https://www.youtube.com/watch?v=QnbSjdqJmyU Stage 4 >https://www.youtube.com/watch?v=whYYSE33Ucw&list=PL285CE6BA316AB702 Stage 5 >https://www.youtube.com/watch?v=RPTtK_BpeyM&list=PLE_2VhSvge5_W2OmLCjx9ymYWG8qzJODl

This is epic.

https://www.youtube.com/watch?v=qM_-CjGflY4

N.W.A Coming out in Aug. Its gonna be dope! http://youtu.be/3N35cBWSeSs

Search Simon Fishman Richard on fb only dude with that name

Tightening Torques 4E-FE When I work on a vehicle I always tighten bolts up in 2 stages if there are more then 3 bolts to tighten. What ever the finishing Nm of torque is half it and do that first so for example if you have a rocker cover that the bolts tighten to 8Nm, tighten them to 4Nm first. After you do them to 4Nm up the torque to 8Nm and repeat the process. Main bearings Stage 1: 29 Nm Main bearings Stage 2: 58 Nm Big end bearings Stage 1: 20 Nm Big end bearings Stage 2: 40 Nm Valve Clearance (Inlet) = 0.15-0.25mm cold Valve Clearance (Exhaust) = 0.31-0.41mm cold Compression Pressure= 9.8-12.7 bar Oil Pressure= 2.6-3.6 bar @ 3000rpm Rad Cap= 0.75-1 bar Thermostat opens= 80-84 C Oil pump : 7 Nm Sump bolts : 8 Nm Sump drain bolt : 25 Nm Flywheel/driveplate : 90 Nm/88 Nm Clutch pressure plate : 19 Nm Crankshaft pulley/damper centre bolt : 155 Nm Camshaft sprocket/gear : 51 Nm Camshaft carrier/cap : 13 Nm Camshaft/rocker cover : 7 Nm Inlet manifold to cylinder head : 19 Nm Exhaust manifold to cylinder head : 48 Nm Spark plugs : 18 Nm Lambda sensor (Oxygen) : 44 Nm Chassis tightening torques Front hub : 216 Nm Steering track rod end : 47 Nm Brake caliper to carrier Front: -Removable carrier = 25 Nm -Integral carrier = 18 Nm. Brake caliper/carrier to hub Front : 88 Nm ABS sensor Front : 8 Nm ABS sensor Rear : 8 Nm Road wheels : 103 Nm (Use zig zag procedure) Source AutoData Hopes this is useful to whoever may need information such as this.

Haha well gonna find out

I painted my wheels to a very close match to rota grid bronze using a compressor i loved the result I used 3 coats of paint on all wheels Before a few clear coats Finished product on my previous car

Alright thanks for your input i think i will do that. I'm not amazing at fabrication, but a few friends I know are. Though I don't want to aim towards a cheap build for it want quality I'm just gonna take it slow and not rush it. Thanks

The wheels are only 280 new. And tyres on top of that I really like the wheels tho and they would fit the ep91. But ik I would want a TD04 down the line. Hard decisions

I've been offered 200 quid and a TD04 for my wheels off mx5. would you do this swap? The ep91 i'm looking at is bone stock. If I was to get this TD04 on with a new manifold of course and full exhaust if need be, would I be able to run it safely if i upped the boost a little before it gets mapped? Or is it best to just leave boost alone throw on all the mods i'm planning then map it? front mount full exhaust TD04 Fuel pump Those would prob me my first set of mods (power oriented) then a map if there is anything worth adding please feel free to help a brotha out I've also read that the fuel pump should be replaced and a 255lph Walbro fuel pump seems to be popular. If thats a necessity i'll get that done first of course.

Thought i'd post here rather then making another topic trying not to go post crazy here haha. I've been offered 200 quid and a TD04 for my wheels off mx5. The ep91 i'm looking at is bone stock not a single little mod to it only about 63,000 miles on it. If I was to get this TD04 on with a new manifold of course and full exhaust if need be, would I be able to run it safely if i upped the boost a little before it gets mapped? Or is it best to just leave boost alone throw on all the mods i'm planning then map it? front mount full exhaust TD04 Fuel pump Those would prob me my first set of mods (power oriented) then a map if there is anything worth adding please feel free to help a brotha out I've also read that the fuel pump should be replaced and a 255lph Walbro fuel pump seems to be popular. If thats a necessity i'll get that done first of course.

Hahahaha this guy has gone global!

I had a 87 honda prelude but it got stolen (back in Florida) no other cars worth mentioning till i came to the UK First Uk car was a 1.3 02 Mazda Demio best feature were the wheels I painted them properly using a compressor with Rota Grid Bronze paint Then what i currently have until i get a glanza. J Reg mx5

Sounds reasonable.

Glanza-4-Life

Yea is he banned or something? lol

Alright guys and one gal thanks for all the replies. I won't bother then.

Yea Im hoping to bring quite a few friend/cars. So far I have a friend who wants to come in his Pulsar. Another who also has a forged mx5 (he's hoping to get it back together in time fingers crossed.) Also got a mk2 mx5 coming, and another mk1 mx5 (350z, wrx sent message to them awaiting reply.)

I've been offered two glanza's by same person. Dudes name is Usman Hayat Black one is mot till july Mileage 9k Emanage Blue ECU TD04 Mild Steel Mani Front mount Running .9bar 250 hp no print out tho and more 3800 for it (Forged Engine built by Dave Burwash) <-No idea who that is White one TD04 Hybrid Front mount Mild Steel Mani bride seats 156km 11 months mot No history (didn't enquire about history on black one) 4G's for it he came at me with both so just wondering if anyone knows how trustworthy he is etc etc. Both in london by the way as well.

Alright just wondering I might have a 350z and a WRX tagging along would be a nice way to end a wedding weekend. Would you need confirmation on if they come?