shorty

jack the car up and see if theres a diff on it too, could just be an uprated diff locking on launches?? is realy hard to say without a vid bud.

not my cup of tea tbh, but that said very nice mix of jdm/usdm. is a credit to you bud looks wicked!!

I'm normaly on a motorola milestone and I can do it all too android ftw!!! Just have fingers too fat for the touch keyboard so make tons of spelling mistakes lol

Lol its not a trash socks thread although he is a stainless whoare lol (love you realy matt) you miss the point, slowly up to temp, lots of switch offs, otherwise yes its burns off in two mins flat, as soon as its smokes turn off, then cool then warm it a bit more. You have to bake it hard not burn the shit out of it lol. Has taken us a good few warm ups and cool downs, id a sloooooow process, may work better if you bake it in the oven but I couldn't be arsed lol. So we did it this way

well as socks has quite rightly pointed out in nearly every thread for some one with a mild steel mani the black paint burns off quick as fook lol. we have realised (me and my mates) the answer is to very VERY slowly bring the mani up to temp. we have sepnt a while ideling the car then letting it cool right back down again then bringing it further up the temp then cooling down again, after sevral build ups to an eventual normal running temp the answer is to the build the temp of the mani more by boosting a little then letting it cool again. yes its a long winded pain in the arse, but so far it

lmao clearly never driven the right scooby or evo then! id like to see how an RS fairs against a 300bhp+ starlet too. the rs has all the looks but the lack of 4x4 in a high powered ford was a mistake, plain and simple. my bosses mate owns one and it spend 90% of its life broken, hes looking to get shot of it now as its just not a reliable car.

no 4x4 =mahoooooooooosive FAIL!!!!!!! thats why i wouldnt have one! all big power fords where 4x4 then they ditched on the focus. stupid stupid stupid ford people!!!! would rather have a scooby or an evo and wave at the rs as i pissed all over it from the start.

i used to do nights when i first started as a sparky few years back. didnt bother me to much tbh, driving home at 6am is awesome no one around = lots of boost lol i just used to sleep alldayget up few redbulls through out the night and then by the time i was home i was ready for bed exellent way to save money to as nowhere is fucking open when your up lol was bloody awesome tbh, id go back to it in a flash

Yea will pm them. Loads of clearance, get it made like mine and room won't be an issue dude, my v is decked too and never realy had an issue

Cheers bud Ill take a load Tuesday eave when im workin on the car and txt them to you bud

Looks tidy, spec?

you going for a plubed back wastegate? no screamer?

wheres the pics!!!!!!!!! i demand pics!!!!!

cheers for the kind words guys expecting anywhere 300+ but we arnt overly sure what to expect tbh as i cant find any graphs for anyone using the vf24 on a 4e. me and some mates have a table of guesses if any one fancies a guess lol we range from 247-324 lol engine spec is now Engine Fully rebuilt head Speedvision billet 265 cams Cruise valve springs 1.2mm Athena head gasket Arp head studs JE forged pistons 75.5mm (1386cc) Cunningham racing forged conrods Arp 2000 conecting bolts Light weight, knife-edged, nitempered and balanced crank Arp bottom end bolt kit power enterprise Super strong t

Cheers guys ill get some more pics when its back in one piece. And cleaned.

Can double check the timing didn't move buy rotating the engine and lining up the two dimples on the inside of the mesh gear on the inlet with the one dimple on the inside of the exhuast mesh gear. When timed in the 3dimples form a straight line all nest to each other where the two mesh gears meet.

Yea will be fine, I'm 100% its ok mines been like it for over 4 months. The billet cam holds my mesh gear to tight to let the spring tension so its meshy n rattles. But I've never been fussed as my whole forged engine is loud due to the parts used. So long as you put them back in the same place and didn't move the bottom pully the mesh gear is the only thing it can be, and like I say that is just an anoying meshy metal noise. No harm can be caused by un tensiond mesh gear bud.

No probs and don't panic, it can damage nothing it just sounds nasty

The rattle will be the cam mesh gear on the inlet cam. Its tensioned and if you didn't put a service bolt through it then when it came out one half of it can move back, it will damage nothing but give an anoying meshy metalic rattle from the head. To sort it you need to tale em out twist the back half (side facing away from cam lobes) and put a 6mm bolt through the hole to hold tye tension, put them back bolt em down then remove the 6mm bolt and the spring locks the gears tightly

lol, you'v won the lottery and not told me havnt you!! and yea my bay is sex lol

get in well done dude!

cheers mate, has taken a few changes to get there over the years fest, fest2 or jae if your at any of em ill take you out in it

OMFG!!!!!! stop uploading pics dude, your making me want a mk1 gt sooooooooooooooooo bad. is actual fucking stunning!! damn good work buddy.

well shes running oil leak is fixed and she has a new power enterpris timing belt and new p/s and alternator belts as the old ones where covered in oil need to order 3 more mikalor clamps for the fmic pipes and fit the bigger brakes. walbro pump is in now too. sooo little left to do tbh then shes off for mot then to turbo grants garage so the orc clutch kit can be fitted, then have the suspension all realighned from the antilift and other handaling bits we did then map it to 1.4bar on the vf24 ;) anyway enough talk have some pics few tidy up bits to do in the bay, cooling panel need

Yes mate, now your talking!! All that take it off the road crap from before, fight fight fight baby spoke to my mrs sister again, she said the response from the second cop is standard response and trnslates to - "I havnt a clue what the law is surrounding your question" she's also going to have a look in her police issue trafic law book and txt me the law as per the police handbook