Jump to content

Amjad

Member
  • Content Count

    12114
  • Joined

  • Last visited

Everything posted by Amjad

  1. Agreed, but as a health professional in training I would haha Good on those of you who have quit, I've seen some nasty long term effects
  2. You could've finished the title of the thread
  3. My GT will hopefully be on the road this summer, new exhaust etc so I should be making more, along with track videos.
  4. ""Also, if you can get hold of Sparky, and he's not crashing into a tree sideways somewhere, he can vouch for the car" Sorry to hear you're selling up Chris!
  5. My GT was this spec, speedo cable popped out of the clocks and I drove it from Soton to Cardiff fine. I've had limp mode before because of my TMIC so I know how that is, my rev counter was also working
  6. Socks was recently running 376bhp, not sure what he was doing in regards to shafts but may be worth giving him a shout Toyota's price is like £500 so you're better off going custom or used.
  7. With castor I should say I have an ALK
  8. Also panhard rod, that would cost more as they only normally do the front on Starlets. It's easy enough to adjust yourself, just take some measurements of where the wheels sit either side in the arch. You don't need to be exact as the front does as many people don't even run an adjustable rod anyway!
  9. Well I think tracking just refers to track rod ends ie toe? But you want a full alignment including camber adjustment (if you have coilovers with adj top mounts), and only the front is adjustable. Usually tracking is £30 and camber adj £30. I went to protyre Eastleigh Bill they charged me £60 for full alignment, just make sure you tell them you want to choose the camber and castor and you aren't wanting factory specs
  10. Nice job there Marc, they look good but I think I do prefer the amber. Good job too, as I wasn't ready to take my indicators apart haha
  11. Should cost no more than about £60, and it'll make a huge difference (it did on mine) Camber -1.25 Castor (quite positive, can't remember the figure) Toe 0
  12. I'd have thought it would have made a mess, leaving the oil cap off did for me lol
  13. Velcro tape is really good, just clean the surface thoroughly and apply it well
  14. Apart from the slash tip it looks just like an FPG! Would be interesting to hear a comparison
  15. Sorry I must have skimmed your post, I'm a bit far
  16. I agree completely, which is why I've bought the afternoon 4 hour open pitlane session at Japfest
  17. Winner! Same colour I want when/if I eventually buy a cage!
  18. There were a few vids Paul, sounded nuts
×
×
  • Create New...