lukEp

I'm going to bump this guys it today and tomoz should be a good weekend or day out I'm off there now I'll post pictures and vids up tonight.

anyone?

i think lyle is talking about a spigot ring to locate the brake disc on the hub like what you get with aftermarket alloys plus when you put a spacer behind the disk it will space everything out so you wheels might catch on the arch if im wrong let me know but i dont think i am.

Nope not interested anymore got better things to do like cut grass and trim the hedge.......... SYKE!!!!

brake banjo's are usually the same size from my understanding just replace the copper washers they should be fine.

mine bounces at around 8k too!

cant wait to see this going together paul its going to be good plus weres them vids i did tex you yesterday but.....?

Yeh lee is correct throttle position sensor might not be closing/switching off correctly, try forcing the throttle closed while the engine is running to see if it moves back anymore, the tps is just a on off swich unless you have and automatic gearbox and if the throttle is closed and the switch is still saying to the ecu it's open all funny things happen.

where are the wires that goto the reverse lights from the auto box i'm trying to get mine working again anyone got a picture of which wires are the correct ones please?

hope this helps! 90311-35040 seal (for crankshaft) 1996/04-

right just looked on the toyota epc and there is no rear bump bar, there is on the front though: hope this helps Luke

TBH I though it can't make as much difference as people make out but now know why they all say do the mod first as it really does pin the rear on the car to the floor, I didn't realise how much body roll my car had till it was fitted and fitting it is really easy, 2 holes to drill which are in a very accessable place, then everything else just bolts on! could easy fit one in 15-20mins np. Next time you have the money to buy one 100% get one you will not be dissapointed!!!

OH RIGHT!!! UPDATE! Took a few hours, a bit of grease and a few spanners but managed to fit the rear anti roll bar and adjustable panhard rod today Pictures :vvvvv: was that excited putting the stuff on I forgot to take pictures of the arb going on lol.

and thank georgie theres no point in twiddling ya thumbs lol.

bloody hell replys on this thread are like buses they all come at once, problem i've got with the lips is there not black as such more purple so would be easier to just paint the lips same as the car. @ ryan, I got to swap the vent, black one for my silver one. @blue what are they any pictures?

Some car washies do a undercar cleaning system cost about £5 and you just drive through like IMO car wash worth a try.

great pictures there alot of effort put in for sure

manifold came this morning also let me know what was going on thanks mate.

is the picture the radio that was in it? if so that not an original loom it might already have the iso adapter on or the wires have been cut and spliced in to the headunit lead if its the second one you wont find an adapter to do the job it will need to be hard wired

the one you want to fit

you need the kenwood lead to iso first then the iso to toyota lead aswell whats model number of the cd player

welcome to the club mate hope you enjoy your stay.

there ya go http://cgi.ebay.co.uk/ISO-STEREO-ADAPTOR-W...=item3a5703cf80

look the sign is that shocked at how clean the V is its falling over!!!!!

whos mapping your car 800notes thats pritty bad and i though you were fpr and fcd surely thats just a fueling setup and check?