Arnold
-
Content Count
865 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Arnold
-
Ebay and yeah they were
-
Brakes will only vibrate if they are warped, and that's under braking too not general driving. If you're getting the shakes, check your wheels are balanced correctly. Very easy for one to have thrown a weight when you had them off
-
I've done rally driving at Silverstone, and drifting experience days. Both awesome. I know a few people who have done single seater or ferrari experiences and haven't been allowed to really give it some on the track, and 3/5 laps isn't that long.
-
I think the only one that counts for speed is out the rear, as they have quite a large lense. Anything in the front is probably just CCTV or ANPR
-
Welcome, not a million miles away from me Do you ever watch the Guildford Flames!?
-
That's its job though, tricks the ECU into thinking everything is OK so you won't hit fuel cut, just starve the engine of fuel if the fueling isn't set right
-
Blitz nur spec R cat back ep91... like new.... SOLD
Arnold replied to iamlegend's topic in Starlet Parts For Sale
Bargain for someone there, glws -
Just chucked a bid on
-
You'll need a FPR with the FCD, or do it properley and get a piggyback ECU for 1 bar. Cheaper than a stand alone which isn't required for 0.8/1 bar anyway. Also replace the standard actuator for an adjustable one like HKS, pretty cheap second hand and that'll control the boost quite well. You'll probably hit fuel cut i think
-
Spotted a Black GT on the Horsham bypass a couple of days back. Flew past you in my Silver Glanza and you flashed your lights. Your car is very smokey by the way! You on here?!
-
Magnecor KV85 Competition ht leads (RED)
Arnold replied to Spoon_tuned's topic in Starlet Parts For Sale
I recently paid £100 for a new set! These are cheap. -
How fast were you going?
-
My light came on when my rear brake bulbs were removed.
-
I've used mytyres for unfitted and blackcircles for fitted quite a few times
-
ha ha really? I didn't have a tape measure to hand but it's definitely a 10mm bolt, as I removed the bung at the weekend. Such a difference in noise
-
You can see the hole in the bottom here
-
Oh right, it came with the exhaust as I bought it all new, so not sure on size but i can check that out later. There's a hole (pre-drilled) in the silencer for you to screw the reducer in. A single 10mm bolt I think and doesn't rattle at all. If anything, I have to WD40 it up when fitting it as it's quite snug
-
I've fitted mine, it's actually quite nice being able to talk to my partner without shouting. After sound test, the Nur Spec was 85db. Haven't really noticed any major loss in power.
-
Well cool... ;)
-
Mad
-
Welcome Jerrick
-
Mine ran fine with bolt on mods like that and the standard ECU.
-
They need to get rid of the "z list in a reasonably priced car" feature, so boring.
-
-
ct9 1 bar on emanage ultimate ecu?
Arnold replied to glanza sheehy's topic in Intake, Turbo & Exhaust
I had 190hp with an emanage blue on a CT9 at 1 bar. EMU would more than likely produce the same results, just cost more.