Arnold

That looks quite handy. I'd worry this might round off the heads though

Generally hear good things about Cliffords, and can have fancy features like remote start and auto window close and that fitted but ideally you want anything that's Thatcham Cat 1 (Alarm & Immobiliser)

I had the timing belt cover off and could see oil coming from somewhere, but wasn't exactly sure Here's the plugs (Cylinder 4 - 3 - 2 -1 )

Welcome

If they break just get a refund through Paypal.

Think it's early so it doesn't run along side X factor. Looking forward to it, especially going on this photo

Ok mate thanks. Don't know what i'm doing or looking for so i'll have to get someone to assist

I've got a leak on the front corner yeah, but it's minor. The main one appears to be behind the cambelt cover on the drivers side of the engine

Hi all I've recently had my head gasket replaced as it was leaking, for an Athena 1.4mm one, but ever since then the car has mis fired on boost. More so around 0.1 - 0.3 bar but can happen at any time. I've changed the leads, plugs, rotor arm and cap but it still happens as I was originally told it was an electrical issue. I've noticed this morning that I've got quite a large oil leak down the drivers side of the engine. It's all down the side of the block and over the sump, looks like from the head gasket area. Could this be the reason why the car is mis firing? If not, what else can I check? The car was running fine before the HG was replaced. No error codes being thrown either. Cheers for any help

Busy days, you can expect to wait 1 hour or more per ride, which really does limit what you can do. Fast tracking the whole day would definitely get the most out of it, but will cost a bomb. Great place though!

Where in Surrey are you, might be interested in a few little bits and can collect.

May also be interested, i'm in Horsham

You definitely need to get that engine light bulb back in / replaced, and maybe check the diagnostics to see if any error codes are being thrown. Could well be fuel cut, especially running 1 bar without the supporting modifications.

Think I had the bumper off when I did mine

That's awesome

Doubt it mate they're probably identical in performance. Will be better than stock leads for sure

Thicker by about .5mm. Good luck with the sale

Do what I do and get a car seat base. All you have to do is pop the car seat on and off with no fucking around with the seat belts.

There is but Glanza isn't listed http://www.howmanyleft.co.uk/?utf8=%E2%9C%93&q=Starlet

You have to avoid pot holes even if the car isn't lowered as well. The issue I have is with speed bumps or other steep angles, kerbs etc.

Yes, but it's low enough already. Scrapes on everything

Mine on Meisters

That's an awesome video. Reminds me of when I hired a car in Menorca, 2004. Can't think why ;)

lol

Yeah that's what I did in the end. All wired in great! Cheers