Jump to content

Arnold

Member
  • Content Count

    865
  • Joined

  • Last visited

Everything posted by Arnold

  1. Another photo, this time of my new sidelights that I fitted yesterday. Nice and bright
  2. You won't need an FCD with an after market ECU will you?
  3. I'm not 100% certain but picture two / three look like the plugs for radiator fans / air con rad fans
  4. Got mine from Camskill, pretty cheap and comes with the lube and clips included
  5. April 2015 update Quick update on the car as we head into show season. I've had a new set of Toyo Proxies T1-R's all round fitted, along with a full alignment done to try and sort out my handling issues. Couldn't afford Goodyear Eagle F1's this time but very impressed with Toyo's grip in the dry. The handling is also a million times better although the steering wheel is still slightly off centre when i'm going straight, but it's no where near as bad as it used to be before the alignment. Alignment was done at Wheels in Motion I've also had another custom exhaust flexi fitted to rep
  6. Goodyear Eagle F1's are superb in the wet and dry. I've had to go for T1-R's this time though as they were half the price, and I know the dry grip is good.
  7. I'd love to have a blast around Brands Hatch. How long does the session run for?
  8. It started off promising, a bit like FF1 and FF2, nice arses, cars etc, but back to the usual over the top action with plenty of unrealistic bits. Entertaining, sad and could have been more than it was, but I'll still go and see FF8, 9, 10, and so on.
  9. Natural camber of the road may give you some movement, and torque steer if you're hammering it, but mine also feels quite light. You probably need to get a front spoiler / splitter to push that front end down at high speed. A rear spoiler will also make the front end lighter
  10. Hi all I've got a non forged 4E producing 218hp at 0.9 bar and i keep having oil leaks from my rocker cover. I'm regularly having the cover tightened or gaskets replaced, and it's leaked again! What could cause this to keep happening? I've also got a RW developments catch tank and "Race spec" cover fitted if it could be anything to do with that? Cheers for any help
  11. Cheers, hadn't thought about the horn. Have you wired up a switch on the dash or something?
  12. Just wondered if anyone has any experience with the steering wheel quick release below. Any wobble with it at all? If you can't see the image, go to http://www.ebay.co.uk/itm/371062283374?_trksid=p2060353.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT Cheers
  13. That's mullered, but the lip looks good
  14. Don't think his brother acts in it, he's just there for appearances.
  15. Tuning Developments sell hubcentric ones
  16. Fuse box in the engine bay. It's bolted in from underneath but easy enough to change
  17. When i did this on my Glanza, it blew the 100A slow blow fuse and the car wouldn't start. A new one of those in and everything was fine, luckily. Looks like this
  18. Fitted my 3Pod holder this weekend. Planning to have my Wideband, Boost and Oil pressure gauge in here, although I have a choice of Volt, water temperature and oil temperature to choose from too. The other three will probably be mounted to the dashboard. Tried the single DIN gauge holder but the Glanza plastic panel wouldn't fit back over the top. Tried cutting it up to make it smaller but still had the same issue, then I ended up binning it.
  19. Well as this keeps happening, i'm thinking the only solution is to just have a front exit one that doesn't smash into the ground!
  20. I'm looking forward to it, but it would be nice if they went back to the direction of the original Fast and The Furious 1 & 2.
  21. +1 happens in my Astra fairly often. A few quick corners and it comes unstuck and the light goes out.
×
×
  • Create New...