Jump to content

Idrees

Member
  • Content Count

    15595
  • Joined

  • Last visited

Everything posted by Idrees

  1. Get the crank ground as little as possible, usually .25 or maybe .5 if it's damaged bad. Enzo (EP Tune) should be able tonsupply ACL bearings, give him a try. The sludge could be caused from poor maintenance or high mileage, or both!
  2. The rubber covers under the nuts are meant to be there to seal the oil. Sounds like you have oil and water mixing. Who carried out the work for you? Either they didn't do the job properly or they've put a pipe on wrong around the inlet manifold/throttle body causing water to mix in the oil.
  3. Pictures added to the first post guys. Faziel if you can get enough interest for 10 pillar pods to suit LHD Starlets then I can have them made. Cheers
  4. If it has a Kaaz LSD then it will not have a factory LSD. In answer to your questions; yes you should take it at £400 if it's in good working order, and yes it will fit your Glanza. 3rd and 4th gears will be a bit longer, I personally prefer this gearbox especially with a bigger turbo.
  5. I have a Bride rail that will fit some Recaros. If you could measure the distance between the holes on the seat I'll check the rail and let you know if it will suit. Will be for sale though, not swap.
  6. Looks awesome, so clean! Power Getter is the best exhaust available for the Glanza imo
  7. I'll show you a picture of both pods mate, they will be light grey so will match the OEM trim. The triple one has the gauges spaced out.
  8. Thanks Steve sorry guys that was a late night post and I was half asleep! Edited now
  9. Front bumper trial fit. I'll try to get it bolted on asap but it might have to wait a couple of days as I have a tight schedule! Also trial fitted a TTE spoiler for giggles, and it looks much better than I expected - Very unique! This is more like it though.. Or maybe this is how it should look!?
  10. I meant stock Glanza sideskirts as his was a Glanza
  11. SiCaln had a Jam rear with stock sideskirts and it looked good
  12. That would be awesome, I'll give you a shout when I'm in Birmingham some time.
  13. Cheers Si, I was thinking it doesn't look bad either! I'm going to trial fit a TTE spoiler just for the giggles! Thanks Josh mate, means a lot. I'll take you for a ride in it once it's done, down that nice dual carriageway where I took you in the GT! Fingers crossed mate, I'll be there!
  14. In need of TLC, has been sat in my garden for a year and I didn't even know it was hiding in the corner. I can't even remember where this came from. The middle has a joint in it and it needs tlc to get rid of some chips etc, cheap price reflects the condition! This suits Mark 2/3 front bumpers. £40 collected, no delivery on this, sorry! Cheers Idrees
  15. Bump, this offer is still avilable!
  16. Feel free to buy me a late birthday present (size 9)
  17. Those Nikes are awesome, and tempting..
  18. Bump this up for any more interest?
  19. Varis Style Bonnet Click here to view price and order
  20. Awesome, so when's she being mapped?
  21. As above, it's really easy. Pull the window down and pull off the rubber seal around the top to make it easier to remove the clips too.
  22. No pictures have done the colour justice yet, I'll get some proper photos once it's all done to show the shine and pearl. Suspence? Haha, tell me about it! I'm working away as we speak with my mate, the spoiler is in primer so fingers crossed for that to be done soon.
×
×
  • Create New...