Idrees

He still owes me £10 for a filter I gave him in October. He always promises he will pay but doesn't..

Yes indeed they look ace. The ID-Workz Demo GT will be rocking one shortly.

As for bleeding the clutch, yeah it's the same as brakes. You can do it without the car running first.

Great progress, looks tidy now!

Well, one sideskirts is done so that's a start! Spent all of yesterday getting the interior sorted. We got the following done: Apexi AVCR fitted AEM wideband fitted Headunit relocated Cig lighter relocated Plastics refitted and interior tidied up Emanage loom neatened and hidden Next on the list is a custom centre console and to wire in the Apexi turbo timer. The exhaust also needs to come off to be heatwrapped and have the bung welded in for the wideband. We also took her for a very small drive last night on my street and she drives awesome after setting the ignition timing. ;)

Wow, this is awesome!! Think the White wheels suited it best though.

Both on their way out tomorrow Good luck with opening them lads, they have several layers of bubble wrap, cardboard and cling film. And foam around the edges under all the layers!

Cheers

Not sure tbh mate, I need to look in to it myself!

Thanks for the comments guys, means a lot! The final piece to have the car running has arrived.. Apexi AVCR boost controller. Sorry mate I've just seen this question now. She drives great, miles better than last time distributor timing needs setting, a couple of vacuums needs blocking off and that's almost everything done.

Awesome mate! It looks incomplete without a grill but doesn't look good with the stock one. Solution = Tom's grill.

You need to remove the clips properly or the clips could break. Look at the bottom you can see the clip bit, pull the clip out and it comes off easy.

Yeah take a look at that, chances are it's leaking from there.

Are you sure it's not the cam cover seal?

Well I'm off Uni for Easter now, I have loads of things to do but considering I can spare a few hours every day I should have it all painted by the end of the month.

Cheers The next job is to finish painting the sideskirts, paint the rear bumper then get them fitted together. Once that's done, we can get cracking with the front bumper and bonnet.

Haha, I'm totally chuffed with it! You need to bite the bullet and get one for yours Ollie!

Cheers guys! Some progress and pictures. Front bumper fitted after trimming! A bit low.. Sideskirts primed and ground coated also

Welcome back Dan, stunning Glanza.

Yes I have on Facebook, add ID-Workz. I can have the pair of wings painted for around £150 extra, per pair.

It could be modified or trimmed to fit. The front splitter is just under £130 delivered on our website.

PM replied Joe!

Welcome along buddy!

The wire on the knock sensor tends to get damaged easily, it has happened to my cars twice in the past. Is the wire on yours in good condition? It's the single wire on the left side of the inlet manifold that runs down.

They will take a LOT of work to fit a GT too. My brother spent ages getting his ET28 Sparcos to completely stop rubbing. Mine has ET10. In answer to your question via PM, yes they are a pain in the ass and no they probably will never stop annoying you! Worth it in the end though! Ps. Wider front fenders help loads. My front don't rub with the wings I have but the rears do.