Sefton-EP91

Did you have an air filter on your old setup? A lot of people mesh the turbos and its makes a lot louder! I always recommend running a filter though.

Are the tyres the same? I would say it's tyres rather than the wheels! Are there any massive differences between the wheels?

Have owned my 98 spec glanza v for just under 5 years now, used as a daily even at 300hp

At 300hp I have no problems at all leaving my friend in his 400hp evo 10. Had a few "spirited drives" with a few cars and tbh there isn't much that can keep up! You should be absolutely destroying that evo at that power. As already said, have a play with the bigger boys or go on track! I'm yet to take mine on track but next show season I may give it a shot!

I'm sure It's a billet td04 from tuning developments

I used that in the end mate! Vey good stuff and easy to apply

They are very good quality and a bargain at the price I paid lol Thanks for the advice morgey I'll look into it

I got them from KODE performance mate, they had some listed on eBay but not seen them for a while, I'll keep my eyes peeled for you!

It's on the to-do list mate thanks for the heads up!

Going to polybush everything in due course. Starting with engine mounts and bottom arms!

Made a start on under-sealing my glanza, ready for the winter months I decided on the Hammerite underbody sealant with added waxoyl. Started with the arches today, at the weekend I'm going get it up on the ramps at work to do the underneath. At the weekend I'm going to do a coolant flush, using Toyota pink coolant/anti freeze. Then in 600miles it's time for another oil change! Again, in time for all the bad weather! Also need to get a couple of layers of wax over her so that will be a task for the weekend once the underseal has set.

Thanks Alex, she is good mate, enjoying all 300hp! Lol need to Mae a start on rebush! I'll start on pay day!

As above what does everyone use? I particularly want to do my arches. So what would be the best stuf for this. What the process everyone uses. Is it just a matter of slapping it on and smearing it in all the gaps? Thanks for all the help in advance, much appreciated

If you wire the POS feed to a switched live (one that works when lights are switched on) and NEG to an earth. That should work. That's exactly what I have done! hope this helps. I wouldnt worry to much about where you wire them into so long as it works. If everything is neatly insulated etc you should be fine. I wired mine into the back of the dials can't remember which wires I went into though.

I got mine from KODE performance. Very good quality! Not sure on the sizes they do! What brakes have you got!?

I've been wanting a set of hubcentric spacers for my glanza for a few weeks now and I managed to get some! These were bought from KODE performance at a very good price, these are half the price of h&r and still have the amazing quality! They are 20mm with a 54.1mm centre bore.. I'm really happy with the results now! Now It's time to get the rebush done! I'll start stocking up the bushes as of next pay day

Mine arrived today need a new gearknob though as it doesnt quite reach the threads inside! More reason to get a new one! Thanks Matt!

All sorted thanks for your help!

Have searched Ebay, can't seem to fine any with a 55mm centre bore!

I'm after a set of huncentric spacers for my glanza. Must be 20mm or 25mm no more or no less please. Please comment below or PM with what you have Thanks!!

I love how flush the wheels are with arches on your glanza nick! Looks lovely mate! Jealous! im going to look into some h&r spacers! Look at getting same size. I just want abit more stance Anyone got any idea what the centre bore diameter is of a glanza? Is it 54.1mm? Thanks

All your comments are appreciated! The wrapped roof is going without a doubt! Its something I've wanted to do for a while but not got round to doing it, same with the spacers. I'm currently running 5mm spacers but they don't really show. So will be wanting 20mm h&r spacers should give ot bit of stance!

I'll take a blue one Matt

Video is set to private mate so can't view it! Mine has small rattle but 8k later and it's fine!