mech5107
-
Posts
515 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by mech5107
-
Interested in the hot pipe...do you ship to Greece?
-
Better put the sensor in the exhaust, after the downpipe. It's needed to have some distance from the engine...they don't like the heat very much. I suppose you have a decat-pipe...if not, it won't ready correct. You don't have to wire through the ECU...
-
Use a T joint and add it to the line going to the MAP sensor.
-
What's the pcd?
-
Bent axles, damaged cv joints, lost balance weights, etc...
-
Also check your driveshafts...
-
I don't think that a cheap option (emanage, etc) will do the job. You will probably need a standalone ecu... A cheap option is to get a megasquirt. Also i'd suggest going for a tps controlled setup instead of map, because of usually poor vacum level due to the quad bodies
-
Me too
-
I'm interested in the mounts... Could you send me some phtotos?
-
Just for your reference, there is also the http://www.toyodiy.com/ where you could find all epc content.
-
Use the stock ecu and add a wideband to see how it's running. Maybe them an emanage blue or SAFC could do the fine tunning. Also use the 5efhe intake, and wire the second runners soleinoeid to a rpm switch, like the ones that flash in rpm meter for gear change.
-
Why you say that? 550cc injectors from an rx7 should be ok for the emanage blue...
-
Converting to 4E-FTE - Will I need to upgrade my N/A fuel pump?
mech5107 replied to Zeldoz's topic in Ignition & Fueling
Standar 4efe and 4efte pumps are the same... Also standar 2e-e pump is the same, if i'm not mistaken... Should be good up to 160-170 ps, i think. I personally got a walbro, just in case... -
What is US lights? Except that the corner ones are a bit more yellowish than mine, seems about the same...
-
N/A clutch is 200mm, turbo clutch is 212mm. In what engine are you putting the flywheel to?
-
Performance Parts For Sale (Updated with new parts)
mech5107 replied to Browner's topic in Starlet Parts For Sale
Does the Nardi wheel come with the adaptor? -
Aren't you going to swap to 5e? Leave it this way and go on with the 5e.
-
What are the dimentions of the cooler including the endcaps?
-
You lucky man...let me know!
-
I suppose the shocks you got are to be used with aftermarket top mounts, so the bigger/special diameter.
-
Yeah, the stock spoiler is the best, but i can't find it anywhere...(if there are more from where you got yours, please let me know... )
-
What is the front spoiler? Seems MAD!
-
It depends mate...i'd say start with something like 6-7 front, 6 rear... A track spec glanza i knew used 12kg front, 7 back i thing.
-
Usually there is a switch to activate the launch. Usually using the switch in the handbrake. In most applications, it's only an auxiliary rpm limiter, lets say 4500rpm. You activate by pulling the e-brake and keep the throttle at 100%. The car holds 4500, but building boost.
-
You can find one in this price segment in ebay i think... And it's sold with both black and silver rings and black and white gauge face, in the package.