TrisK

is it HID converted? I had this, was a bad relay/balast/earth

pointless post is pointless

i would like this too for working with my turbo timer!

i get a few people look, especially when it dumps through town and things. confused looks. i was in my mates mk2 focus rs at the weekend. now that is a head turner, EVERYBODY looks at you

38 to 51mm silicone elbow reducer 51mm allow pipe 51 -> size of air filter inlet silicone reducer

Yep, plus body kits + wheels, all real licenced ones and full customizable paint/graphics/wheels color/mirror colour/bonnet colour etc etc

yes you can. if not try phoning kenwood direct, it may be easier.

http://www.bbc.co.uk/news/technology-12595681 ^^ This, break in at one of their technical buildings

pic of this rain scoop thing, i looked at ryans project thread but cant find one :/

battery has probably had it. if it was imobilizer it just flat out wouldnt start

rain scoop? pics?

its misfiring mate. check the leads are seating right in the head. check for moisture in the spark plug wells. put some vaseline round the edge where the plugs go into the wells

This doesnt fit on the glanza by the way

is it coming from the door speakers? could be alternator whine if you have after market speakers? or maybe its your turbo haha

i want some pics of these wasps!! i also want to see more pics!

i tried to search for dhpsport, didnt bring anything back mate. got a link?

get one of those rads that look like an intercooler hahah

ok, after talking to somebody on here, they say the space is tight, and all you need is the 90 degree reducer so i need 38mm for off the ct9 right, then my trust filter is 57mm but nobody seems to make a 38 to 57mm reducer elbow. can anybody tell me where i can get made up?

hmm ok. what size inlet is the hks filter? if you can remember

h3c its a funny one. similar to h3, but the earthing is different im pretty sure there is a tut on tgtt on how to change the earthing to make them regular h3s my opinion would be 8000k, i had them and they looked mint. although i took them out as i had an earthing issue wiht my kit, and havent reffited yet

there is also a gasket that goes from the cat to the rest of the exhaust system mate

is that a front mounted mushroom mate? i want to do the same, whats the space like? did you just use a right angle, then a straight pipe? thanks

ok, my trust filter is 57mm, so i need 38 to 51mm 90 degree elbow - http://cgi.ebay.co.uk/51mm-38mm-90-Elbow-R...=item20a951e6e2 51mm alloy pipe - http://cgi.ebay.co.uk/51mm-OD-x-300mm-Alum...=item20adb1362f 51 to 57mm straight reducer - http://cgi.ebay.co.uk/57mm-51mm-Straight-R...=item1e548239f4 My only question is, item 2, the alloy pipe. ive gone for the 300mm long one (about 12 inches) will that be long enough/too long? and that comes to £32.27, not bad, cheaper than the prebuilt kits by a fair bit

isnt your second solution what i suggested? have you got any pics of what he said? does he have a thread on here or on tgtt?

has anyone done this with a mushroom. i was going to take out air con, fit a civic rad. Then get an elbow reducer, a straight ally pipe, then a straight reducer to the size of the airfilter. This should put the 'top' of the mushroom facing forward right? has anybody done the relocation with a mushroom? any pics? will my piping plan work? also, does anyone know the size of the intake on a trust mushroom? if not i will measure mine at the weekend. Thanks