Jump to content

5e colin

Club Member
 View Profile  See their activity

  • Content Count

    6604

  • Joined

  • Last visited

 Content Type 

Everything posted by 5e colin

  1. 5e colin
    depends on ecu really some will go beyond 1bar tdo4 fit and check id go wepr anyday over any other company you will have lifetime warranty dont think you will be getting that from any other 1
  2. 5e colin
    there on ebay uk mate 13£ delivered look for corolla2 el51 :)
  3. 5e colin
    your last parcel didnt arrive yet not your fault there is a postal strike over ere for 4 days
  4. 5e colin
    yes it fits but there such a crap box totally useless go for any 5 pot instead car will pull faster with 5pot
  5. 5e colin
    niiiiiiice >>>>>>>>>>>>>>> some day some day for sure
  6. 5e colin
    you can slap a 4e head on the 2e they boost well they have strong rods in them
  7. 5e colin
    there made to last and are made exceptionally well i got some
  8. 5e colin
    tracing that wire is simple if its in the loom with a multimeter you can also test the dizzy https://www.youtube.com/watch?v=PUAd5K3OQV4
  9. 5e colin
    cheers adam jdmfreak i run 185/60/14 at 36psi at 32psi my car moves to much and my cornering feels sloppy ( car moving around )
  10. 5e colin
    what parts of the sensors etc etc did you use to run the gt loom i ran for over a year NA 4efte electronics and and 295cc injectors , passed nct emissions flying colors low idle 0.12% and high idle was only 0.01% you had a issue for the over fueling mate no turbo map or 02 sensor not connected or ecu temp sensor somthing like that anyways
  11. 5e colin
    td04 comp housing and prop fits on a tf but i think the core of the tf035hm needs to be machined where the comp. propeller sits on the housing there is also a bolt on upgrade that dont need machining but i cant find them on the bay
  12. 5e colin
    hey guys if i fit front uprated swaybar will it cure the pulling i get when crossing ruts and white lines ??
  13. 5e colin
    they can indeed
  14. 5e colin
    im on about there the same fitment amigo not the ratios ( box to engine mounting points )
  15. 5e colin
    thats not bad you can salvage al the cables pedals hydrolic line etc etc from the gl you will have al u need then
  16. 5e colin
    starlet gl manual yes al gearboxes on any Eseries engine will work 12345e you going converting her now to manual corolla 1.6 no diferent bel etc
  17. 5e colin
    i would just get your compressor wheel and housing upgraded to 19t on the tf035 you would gain like sooooo much more torque
  18. 5e colin
    what gen is your 5e if its gen1 it probly have fat rods and boosts very wel trow up a pic of the rods if you can if your lucky there fat and take a good amount of boost
  19. 5e colin
    just to ad to this thread i did it few years back and got the """" APEC DSK 2188 """"" al i had to do was cut 1.5mm of the inside hubface ( 4x100 ) and cut them down to 260mm now they bolted strait onto my hub without spacers and longer studs pure oem fitment they also fit under my 14" jdm wheels
  20. 5e colin
    from toyota yes there diferent material but from moterfactors no there the same i got 5e rings on my 4efte in 5e there available in 74mm 74.5mm and 75mm :)
  21. 5e colin
    ^^^ no there the same cam
  22. 5e colin
    could that not bend now under hard braking ???? thats where al the stress ends up on that end of the wishbone
  23. 5e colin
    welcome kit that would be a nice project and 1 fast pocket rocket they weig even less then our cokecans
  24. 5e colin
    did that there again im getting soft parking brake pfff handbrake is pulled right up and lever arms on both calipers are both to the far front of the car brake pedal is solid i cant move the wheels attal then are my calipers fucked ????
  25. 5e colin
    small update swapped the pads around so now the niple is in the groove i unwinded them to where they just could not go on the pads then pushed them strait back a mm with a plate with a bolt tru pushing another plate that was lying on the piston so piston cant rotate backwards loose i hope but i think i will have to redo this procedure when the pads are bedded in again ??
×
×
  • Create New...