McGlinchey Posted June 7, 2012 Share Posted June 7, 2012 lovely dash!! Quote Link to post Share on other sites
starletburkie Posted June 7, 2012 Share Posted June 7, 2012 looking good man fair play! Quote Link to post Share on other sites
abbott Posted June 8, 2012 Author Share Posted June 8, 2012 (edited) thanks for all the comments lads UPDATE up to date spec listEngineStock 4EFTE EngineStock CT9Zisco ManifoldBlitz De-catApexi Air filterAir filter relocation kitGreddy Front mount Intercooler KitGreddy Oil Cooler Kit Blitz Nurspec exhaust systemCusco catch canAttain Throttle PulleyJam Cooling PanelRoose HosesZep water temp sensor adaptorSard R2D2 Blow off valveNGK iridium spark plug Slim line Rad fan Alley Civic Radiator Custom Expansion Tank Sard Rad capTransmission C52 gear boxQuaiffe ATB LSD|Blitz active single plate clutch kitTRD quickshiftZep Linkage bushsHel braided clutch lineChassieCusco 6 point roll cageZep C pillar carTRD front strut braceCusco Carbon Rear Strut BraceWhiteline front drop linksWhiteline rear drop linksWhiteline front anti roll bar (powder coated candy blue)Whiteline rear anti roll bar (powder coated candy blue)RSR Panhard RodSuper Pro front wishbone bushesTMD rear beam bushsEngine / Gearbox poly mountsBrakesFrontWilwood 4 pot calipersWilwood Brake pads284mm discs on bellsBraided linesRearStd Rear DiscsEBC ultimax padsBraided linesCusco BMCS Wheels and tyresRays TE37s Yokohama Parada Spec 2 195/50/15 tyres Muteki wheel nutsExterior96 spec shellJam reverse scoop 98 spec rear lightsLED rear spoiler brake lightRolled rear archsInteriorCustom 3 gauge pod made in to dashFlocked dashFlocked hand brake and centre surroundRacaro Door CarsMc Chu Carbon clock surroundCobra Imola S Carbon Bucket seat (Driver)Custom adapted Bride seat railscooby (Passanger)Battery relocated in custom boxHarnesses Harness BarOMP 330mm dished steering wheelElectonicsGreddy Emanage Ultimate (E board)Greddy 3bar map sensorTuning developments custom Emanage loomGreddy Profec B spec 2 boost controllerDefi Link ControllerDefi Link Boost gauge GaugeDefi Link Oil Pressure GaugeDefi Link Oil Temp Gauge Defi Link Water Temp GaugeSome parts are not fitted as of yetCar is mapped at 1 bar results to follow Edited September 4, 2012 by abbott Quote Link to post Share on other sites
abbott Posted June 20, 2012 Author Share Posted June 20, 2012 UPDATELast week gave my Bride seat frame to a mate to modify to a side mounted seat frame which still slides. So he manage to cut the legs off and lower it a inch and modify my side mounts to fit. the seating position in the car now is so much better and the seat is amazing.Heres pics of the the modification and fitted to the carAlso while he was doing the frame he re straightened my oil cooler outlet and put a weld round it so it will not leak as when i received in the post it was bent.Saturday morning received my zep linkage bushs from the ID-Workz group buy looking forward to fitting theseSaturday afternoon I poped down to Sicaln to swop my spare rocker cover with his one with breather fittings in. Will be going off to the powder coaters soon Also collect some rear braided Brake lines, HKS fuel Rail and Cruise Cams. Many thanks to Sicaln for these Quote Link to post Share on other sites
glanzagee Posted June 20, 2012 Share Posted June 20, 2012 nice now hurry up and put that turbo on Quote Link to post Share on other sites
SiCaln Posted June 20, 2012 Share Posted June 20, 2012 hmm sexy parts my man lol Quote Link to post Share on other sites
Liam_D Posted June 20, 2012 Share Posted June 20, 2012 Some more awesome parts being poured into this mate Quote Link to post Share on other sites
abbott Posted July 3, 2012 Author Share Posted July 3, 2012 nice now hurry up and put that turbo onwont be getting this on till end of the year or begining of next may wait till engine is builthmm sexy parts my man lolCheers Si thanks to youSome more awesome parts being poured into this mate thanks Liam. wish my paint work was mint as yours tho Quote Link to post Share on other sites
nest Posted July 3, 2012 Share Posted July 3, 2012 Love this build man, gonna follow this Quote Link to post Share on other sites
Nanglebadger Posted July 3, 2012 Share Posted July 3, 2012 looks fantastic dude, awesome work.the rear interior is the same route i'm going with mine and now having seen yours has confirmed for me its the way to go!keep up the great work!Phil. Quote Link to post Share on other sites
abbott Posted August 18, 2012 Author Share Posted August 18, 2012 Love this build man, gonna follow thischeers buddylooks fantastic dude, awesome work.the rear interior is the same route i'm going with mine and now having seen yours has confirmed for me its the way to go!keep up the great work!Phil.thanks phil Quote Link to post Share on other sites
abbott Posted August 18, 2012 Author Share Posted August 18, 2012 Little updateAfter Forging my brothers car I kept back his standard engine for my forged engine build I have stripped it down now and it has been dropped off to Rob Barnard at S.E.S (Specialised Engine Services) who built my last engine and built TM Developments race engine I wil keep you posted with whats being done as we are trying a few custom things hes developed with the 4eBrought some rubber bungs for the inlet manifoldThanks to Grant for the Cruise Gear knobAlso picked up a Cusco carbon rear strut brace off another member and fittedI poped down to Sicalns for another visit to see what he had for me picked up a mint set off Racaro door cards and a JDM LED clear spoiler rear brake light and fittedBeforeAfterPicked up a RSR Panhard rod from IdeersAlso as im planning to do alot of track days next year and was tring to do some this year but been so busy with other things I bought this simpson helmet so im partly ready Quote Link to post Share on other sites
SiCaln Posted August 20, 2012 Share Posted August 20, 2012 Looking awesome dude Quote Link to post Share on other sites
Liam_D Posted August 20, 2012 Share Posted August 20, 2012 Some more awesome parts going on it dude Quote Link to post Share on other sites
turbo Grant Posted August 20, 2012 Share Posted August 20, 2012 getting some tasty parts. going to be another monster Quote Link to post Share on other sites
abbott Posted September 4, 2012 Author Share Posted September 4, 2012 update 4/9/2012well friday 31/8 came home and stripped the back end down to stone chipper shield the back end which i had been planning to do for some time and fit my parts which ive been collecting. so started stripping down and masked up the car to protect form over spray and sprayed the back end and underthis is how it looked saturday morning and i was very happy with how it came out.Next up was to fit the RSR panhard rod and Whiteline rear ARBI have bought some new Toyota rear discs, bearings and seals with EBC ultimax pads. One thing i hate after a while the centre of the discs rust so i gave it a good coat of heat proof paint and then fitted. also cleaned coilovers and refitted.the painted the calipers and re greased the slidders up and fitted my braided rear lines and bled the systemLast week i went to for a road trip to jay and picked these up which ive been after for a while Set of Rays TE37s and go my brother to swope my tyres on to them on saturdaythen washed the car and wheels and put the rest of the car together ready to go to TraxAlso picked up a Laguna splitter and fitted later that night ( not a great quality pictures as took on phone)Sunday morning ready in the garage to go Trax Quote Link to post Share on other sites
Liam_D Posted September 4, 2012 Share Posted September 4, 2012 Attention to detail is crazy dude, definalty one ofmy favourite builds on here. Quote Link to post Share on other sites
abbott Posted September 5, 2012 Author Share Posted September 5, 2012 Attention to detail is crazy dude, definalty one ofmy favourite builds on here.Thanks liam ive ot to try and do the front end now lol!Saw u drive past me at silverstone but didnt get to find you for a chat Quote Link to post Share on other sites
jayep91 Posted September 5, 2012 Share Posted September 5, 2012 Looking sweet dude this is one of the cleanest glanza I've ever seen fair play Quote Link to post Share on other sites
SiCaln Posted September 5, 2012 Share Posted September 5, 2012 Looking awesome man, just needs some Cruise wings or Cruise bonnet then would be perfect lol Quote Link to post Share on other sites
abbott Posted September 6, 2012 Author Share Posted September 6, 2012 Looking sweet dude this is one of the cleanest glanza I've ever seen fair playMany Thanks matey and thanks for the wheels again Looking awesome man, just needs some Cruise wings or Cruise bonnet then would be perfect lolCheers si. mmmmm tempting but im just not sure on these fibre glass body panels if i was interested defently be the wings but i will keep you posted. Quote Link to post Share on other sites
SiCaln Posted September 6, 2012 Share Posted September 6, 2012 They have ow been sold bro Quote Link to post Share on other sites
abbott Posted September 17, 2012 Author Share Posted September 17, 2012 (edited) UPDATEwell last week desided to strip down the front end and give it the same treatment as the rear and get a few bits powder coated, fit parts which ive been storing up and modifiy a couple of bits.cleaned coilovers up before going back onDelivered these to the powder coatersBefore Afteralso got front bolts zinc coatedAlso done a modification to the radiator and had the bottom hose port movedfittedCleaned up my custom expansion bottlefitted my rear gearbox bush back in the mount and fitted along with my powdercoated arm bracesnext was to fit my superpro bushs in to my lower armsso fitted them along with my front antiroll which i powder coated months ago varous pics of thisBought this a while back as wanted to change my exhaust system on my car and wanted a JDM decat pipeWhen we stripped my brothers Glanza i kept back the HKS hi Power Silent exhaust system as prefured the angle and noise of the exhaust and it was only a few months old. so fitted this along with the Blitz decatcouple of pics of parts back together under archssome new toyota coolantSunday went back to Basingstoke to pick up a LINK G3 ecu with subaru legacy TPS and all the info to get running.also spoke to a company in usa who can make a custom harness for this so its a direct plug in Edited September 17, 2012 by abbott Quote Link to post Share on other sites
zebedee Posted September 17, 2012 Share Posted September 17, 2012 Nice work mate, you sticking with a ct9 based turbo then? Quote Link to post Share on other sites
abbott Posted September 17, 2012 Author Share Posted September 17, 2012 Nice work mate, you sticking with a ct9 based turbo then?check my 1st post on page one mate im going to be running a Greddy TD05 16g on a custom manifold etc and race spec engine towards end of the year ;). got to say tho the ct9 performs really well Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.